LifeShield OC810 Setup

camera. Wait for power LED to stay solid, which takes about 2 minutes Note: Power light is light green (see Diagram A) Using your Console, press Menu Scroll to Cameras, press Select Enter Master Code* Scroll to , press Select Your screen will display “Use Auto Search”. Scroll to YES and press Select Your screen will then display “Connect all Cameras to Power and Ethernet”. Select OK (This should have been completed during step 1. If it was not done, plug the Ethernet cord, then the Power cord into the back of the camera now) The system will search for the camera to be added to your system, and the screen will say “Searching...” and display how many cameras are found. The console will then start a 120 second countdown Once the console displays the number of cameras you added to the system (example: 1 camera found), select OK Edit Camera Name (optional) To edit the name of your sensor press the DELETE button to erase text and use the keypad keys to type in a new name. Press OK A B C D E F K Add Outdoor Camera Model OC810 OC810 (if included) Outdoor Camera—Wireless Setup NOTE: You must know your Network SSID, Security Type (WPA/WPA2, WEP or None), and Password to complete this process. Your camera must also be on the same wireless network and router as your LifeShield Base to setup properly. - 2 - • *Maser Code on the inside front cover of your set up guide Power light – faint green light will display. You may need to cover with your hand to see A G K K

attached appropriately to camera to complete wireless setup Login to LifeView and enter your Username and Password at lifeview.lifeshield.com Once logged in click on the “Cameras” tab You will then see the cameras that are associated with your account on the left-hand side of the screen. Select the camera you want to make wireless from the drop-down menu Click on the “Setting” button located in the upper right hand corner WiFi antenna must be installed to use WiFi Use rubber cover for Ethernet plug Use rubber cover for Power plug D E B E

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. *Wireless, or WiFi, technology allows an electronic device to exchange data wirelessly (using radio waves) over a computer network. For support call: 866-222-8580 or visit: customers.lifeshield.com F Click on the “Edit” button Enter in your wireless information 1. Wireless Network SSID – Home Network Name 2. Wireless Connection Security – you will need to know if you have WEP, WPA/WPA2, or None 3. Wireless Password – Home Network Password 4. HIT SUBMIT Once your wireless information has been submitted WAIt 2 MInuteS, then unplug the power cord and then the Ethernet cord. WAIt 10 SecOnDS and plug the power cord back into the camera NOTE: During this time, your camera status will show as disconnected in LifeView Once the camera obtains a wireless connection to the router the status in LifeView will display “Camera Ready”. This can take a few minutes. The camera power light should be solid If the camera works while connected to the Ethernet but not wirelessly then the WIFI* information must be verified. Repeat Test your camera by playing a live video or by taking a snapshot (options at the bottom of the page). Make sure you select the correct camera prior to testing nOte: it may take a few minutes for your camera to properly take pictures and video through lifeView. Wait if necessary. G H I J K I F