Mobeye ThermoGuard TwinLog CML2255 Operation & User’s Manual

To activate the unit in the portal, the GSM module needs to be open and connected to the network. In the situation that the CML2255 is connected to an external power supply, the unit is always in program mode. A battery-operated Mobeye CML2255 switches to the program mode after pressing the on/off button for 5 seconds until the LED starts flashing. Alternatively the batteries are re-inserted. While searching for the GSM network connection the outside LED flashes green and red, followed by blinking fast shortly. This process normally takes 10-30 seconds. As soon as ...

The Mobeye CML2255 has many setting options that influence the behaviour of the module. If connected on the Mobeye Internet Portal, the settings are prepared in the portal (see chapter 4). If your own SIM card is used, programming is done via SMS commands (see chapter 8). 5.1 ALARM PHONE NUMBERS In the event of an alarm, the Mobeye CML2255 can call 5 telephone numbers (TEL1… TEL5). It is possible to confirm a call by picking up the telephone and pressing any key. The following numbers will not be called. When using your own SIM card, it is mandatory to set at least on ...

5 2. Standard behaviour 6 2.1 Mobeye CML2255 with Mobeye SIM and Internet Portal 6 2.2 Mobeye CML2255 with own SIM card 7 3. Getting started 9 3.1 Insert the SIM card 9 3.2 Insert the batteries 10 3.3 Connect the temperature sensor 10 3.4 Connect an external power supply (optionally) 10 3.5 Connect a sensor to the inputs (optionally) 11 3.6 Connect a device to the output (optionally) 11 4. Programming when using the Mobeye SIM and portal 13 4.1 Sign up in the Mobeye Internet Portal 13 4.2 Register the Mobeye SIM card 13 4.3 Enter the program mode 14 4.4 Activat ...

on the "edit" icon and type in the security code (factory setting is "1111"). See chapter 5 for the description per setting. After saving the new settings, they must be retrieved by the device (synchronized). See 4.5 for more information about synchronizing. The device data contain the name and location of the device and can be changed here. These texts are mentioned in every text message and e-mail message to indicate the device. A free text is available as an internal comment field. This i ...

battery’ message to the Mobeye Internet Portal. The portal forwards this to the ‘service’ contacts. - The unit will send test messages to the portal as communication check (default: every 7 days). If these are not received in time, the portal sends an exception message to the ‘service’ contacts. Chapter 5 describes how to influence the standard behaviour. As described, the Mobeye CML2255 will, in addition to calling in the event of an alarm, send various messages to the Mobeye Internet Portal. This is done ...

The Mobeye CML2255 is a GSM module used to monitor the temperature and to send alarm messages once the temperature limits are violated, one of the inputs is activated, or -if powered externally – after a power failure. Two temperature probes can be monitored. If connected to the Mobeye Internet Portal, the temperature values are logged and transferred to the web portal. In order to activate the device, a few steps are to be followed. First of all you’ll have to choose a SIM card to place in the device. You can use the Mobeye SIM card or your own SIM card. The Mobey ...