IFM SmartLine AC3218 Operating Instructions Manual
Text of the manual
1 Preliminary note ���������������������������������������������������������������������������������������������������3
1�1 Explanation of symbols �
1 Preliminary note
Technical data, approvals, accessories and further information at
www�ifm�com�
1.1 Explanation of symbols
►
Instructions
>
Reaction, result
→
Cross-reference
Important note
Non-compliance may result in malfunction or interference�
Information
Supplementary note�
2 Safety instructions
• Read this document before setting
3 Functions and features
The slave receives data via the AS-Interface and converts them into analogue
output signals� The AS-i module operates as a slave with bidirectional data
transfer in the AS-i network�
The data transfer from the host to the slave is asynchronous according to the AS-i
profile S-7�3 and the AS-i specification V2�11�
• The s
5.1 Installation of the device
► Install the device on a 35 mm DIN rail�
► Leave enough space between the unit and the top and bottom of the control
cabinet to enable air circulation and to avoid excessive heating�
► Take into account the internal heating of all devices when mounting several
devices side by side and observe the
