Explo RX-1K Manual
Text of the manual
9020 Klagenfurt am Wörthersee
Austria
Tel:
+43 (0) 463 / 32 2 45
Fax:
+43 (0) 463 / 32 2 45 75
Mobil: +43 (0) 664 / 51 007 51
www.explo.at
[email protected]
Explo
Zündtechnik
RX-1K
Manual v0.1
As of September 2013
Please read through this set of instruction before operating your devices. Many of the informations
held within are crucial to learning about- and handling your system.
We ask of you to follow the mentioned safety and user guidelines closely.
Note: This Manual is a pre-version. If you have any questions, or should any vaguenes
Overview/Description of Components ............................................................................................ 4
2.1
Overview of Components ........................................................................................................ 4
2.2
Description of Components ......................................................
2 Overview/Description of Components
2.1 Overview of Components
Antenna
Status-LEDs
Socket to switch on and
programm
Socket for igniters
2.2 Description of Components
2.2.1 Antenna
The Antenna is used to receive data (In case of the X2-series also to send). To jam the antenna in case
tops for example, can easily lead to damages, and should therefore be avoided. Please make sure the
antenna is not jammed anywhere, when storing the RX-1K.
2.2.2 Socket for Igniters
The 2 pole terminal block (b
