Ex-Or UBT2000DIN Installation And Commissioning Instructions

File Specifications

Brand: Ex-Or
Category: Transceiver
Model: UBT2000DIN (Installation And Commissioning Instructions), prX6DsrjcplsE
File Info: Adobe Acrobat PDF (DjVu)
File Size:
Pages: 2 pages

Download PDF

Download Ex-Or UBT2000DIN Manual (2 pages)

Read Online:

Read the Ex-Or UBT2000DIN Installation And Commissioning Instructions online using the built-in PDF viewer. This document explains how to operate the device, adjust settings and perform regular maintenance.

Key Pages of Document

Input: MLS Bus signal from other MLS devices programmed to the same zone.

Action: The UBT’s internal timer (for the purpose of operating its relay and digital output) is started or refreshed. Closes volt-free output - to operate external device/signal BMS etc. Sends digital signal to ballasts (if connected) to set light level as programmed. USING THE UBT TO RECEIVE SIGNALS FROM THE BUS TO SWITCH AN EXTERNAL NON-MLS DEVICE (RECEIVER MODE)* USING THE UBT AS AN INTERFACE DEVICE (TRANSMITTER MODE)* Input: Signal on input 1, 2 or 3 from an external switch. These inputs can be programmed to ...

Ex-Or UBT2000DIN user guide recommended for: DS2154, MDS FIVE Series, Crystal CDB8427, 7 Series, NX-5600HB.

⚠️ Download Safety

The Transceiver Installation and commissioning instructions (2 pages) is completely safe to download (last scan date: 10/04/2026).

Related PDF Instructions for Ex-Or UBT2000DIN:

Transceiver Equipment: Frequently Requested

Have some Questions about Ex-Or UBT2000DIN Device?

Get valuable and actionable advices from other Ex-Or UBT2000DIN device users. Describe your problem or question, regarding the using of UBT2000DIN, in as much detail as possible, and other users will be able to answer you.