Dynacord DCS 412R Quick Start Manual

DCS 412R www.dynacord.com ▪ 12 inputs ▪ The polarity for each input can be freely selected ▪ Each input is isolated by separating the wire jumpers ▪ Pluggable connection terminals for power supply to the buttons, contacts, and sensors The module is fitted on the back of the DCS 400 rack plug-in board. The module is used to connect control cables, buttons, switches, and sensors in order to check their status (on, off) in the PROMATRIX 8000 system. Additional properties: • Pluggable connection terminals with screwed flange for all inputs • A maximum of 5 DCS 412R modules can be cascaded Parts included No. Component 1 DCS 412R 2 Plug, 15-pin (Phoenix MC 1.5/15-STF-3.81 - 1827839) Technical specifications Operating voltage 24 V DC, -10%/+30% Operating current, all inputs open • Standby/Idle/ Announcement/Alert 24 V, 83 mA, 2.00 W Electromagnetical environment E1, E2, E3 Operating temperature -5 °C to 45 °C Product dimensions (Width by Height by Depth) 37.5 by 80.6 by 245 mm Net weight 175 g Input level • Input voltage for off (Low) U_IN < ±5 V • Input voltage for on (High) U_IN > ±10 V • Input current at U_IN = 24 V I_IN = 4.8 mA • Input voltage max. U_IN max = ±31 V Output source 24 V • Output current max. 90 mA

GND BR1 BR2 BR3 BR4 BR5 BR6 BR7 BR8 BR9 BR10 BR11 BR12 A13 B28 GND REF-OUT +24V Block diagram Installation/configuration notes Installation information On the DCS 400 rack plug-in board, slots 1–10 must be occupied in ascending sequence (left to right) without any gaps. Different module types can otherwise be arranged in any sequence. Exception: Slot 1 (far left) must always be occupied with a DCS 801R control module or DCS 405R extension module. When assembling the device and installing the connections, please comply with the standards VDE 0100 and EN 60065. Connector The scope of delivery for the device includes two 15- pin connectors. Conductor cross-sections of 0.14 mm² (AWG26) to 1.5 mm² (AWG16) can be used. Recommended connecting cable: flexible CU strand, LiY, 0.75 mm². Position of the bridges on the circuit board Certifications and approvals Status as of November 2012: • EN 50130-4 • EN 54-16 • EN 55103-1 • EN 55103-2 Ordering information DCS 412R Order number F.01U.121.788 2 | DCS 412R Represented by: Germany: EVI Audio GmbH Sachsenring 60 94315 Straubing Germany www.dynacord.com © Bosch Security Systems 2013 | Data subject to change without notice Document Number | Vs1 | 19. Mar 2013