ESAB FC-5C Instructions

0558004303 Printed in U.S.A. A H G F N K J E D C B L M I FACE VIEW Make sure all primary power to Power Source is disconnected before installation of these plugs. WARNING INSTRUCTIONS for This remote control is designed for use with any power source that employs a single (common) cur- rent and contactor control 14-pin Amphenol recep- tacle. It contains a potentiometer which controls the current output when the Panel/Remote Switch (PRS) on the power source is placed in the "Remote" position. This remote control also consists of a switch when the PRS is placed in the "Remote" position. Both the potentiometer and switch are operated when the FC-5C pedal is depressed. See the schematic diagram in your respective power source instruction literature. Interconnection of these functions to the main power source is provided by a single mating 30-ft. cable/ plug assembly provided. By depressing the foot pedal, the weld start sequence circuit will energize, and the welding current will in- crease or decrease semi-linearly within the range pre- set on the power source "Current" control potentiom- eter. To use the remote control, proceed as follows: 1. Plug the FC-5C control cable into current/contactor control receptacle on the power source. 2. Set the Remote/Panel toggle switch to the Remote position. 3. Set the Current Control on the power source panel to the maximum current range to be used. 4. Depress foot pedal as desired to weld. FC-5C FOOT OPERATED REMOTE CURRENT AND CONTACTOR CONTROL ! ESAB ESAB Welding & Cutting Products PO Box 100545, Florence SC 29501-0545 BLACK RED WHITE BROWN BLUE P1 E F G D B A R9 SCHEMATIC DIAGRAM FC-5C Foot Control Assembly (30 ft.) ESAB P/N 0558004234 12 / 2004 (SW Closed) Treadle In Down Position

FC-5C FOOT OPERATED REMOTE CURRENT AND CONTACTOR CONTROL 0558004303 15 14 10 5 6 2 12 4 2 8 7 9 3 1 11 13 10 FC-5C Foot Control Assembly (30 ft.) ESAB P/N 0558004234 1 0558004235 Base with Pads 2 0558004236 Pivot Pin Assy. with Axle 3 0558004237 Microswitch with Screws 4 0558004238 Pinion Gear with Set Screws 5 0558004239 Treadle with Pad 6 0558004240 Torsion Spring 7 0558004241 Rack 8 0558004242 Compression (Rack) Spring 9 0558004243 Convoluted Sleeving 10 0558004244 Rack Housing with Screws 11 0558004245 Strain Relief Bushing 12 0558004246 Pot - 10K LIN, 2W High Life FC-5C 13 0558004247 Cable FC-5C per Foot (30) 14 952248 Plug, 14 Pin Male 15 23601944 Clamp, Cable Item Part No. Description