Draper 65958 Instructions Manual

COMPRESSOR I STOCK No.65958 I PART No.DA12/250A • INSTRUCTIONS • IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS TOOL. GENERAL INFORMATION This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which should be kept with the machine. This manual describes the purpose for which this tool has been designed and contains all the necessary information to ensure its correct and safe use.We recommend that this manual is read before any operation of the machine, before performing any kind of adjustment to the machine, and prior to any maintenance tasks. By following all the general safety instructions contained in this manual, it will ensure both machine and operator safety, together with longer life of the tool itself. All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the machine. Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tool policy of continuous improvement determines the right to make modifications without prior warning. 08/2001 all-guides com

COMPRESSOR I STOCK No.65958 I PART No.DA12/250A CONTENTS: Page No. Contents/Declaration .......................................................................................1 Specification/Guarantee...................................................................................2 General Safety Instructions ..............................................................................3 Getting To Know Your Mini Air Compressor .....................................................4 Operation & Use............................................................................................5-6 Troubleshooting ...............................................................................................7 We Draper Tools Ltd. Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF. England. Declare under our sole responsibility that the product: Stock Nos:- 65958. Part Nos:- DA12/250A. Description:- Mini Air Compressor 12 Volt. To which this declaration relates is in conformity with the following directive(s) 89/336/EEC. With reference to: EN55014-1 & EN55014-2. JOHN DRAPER Managing Director 14/06/2001 DECLARATION OF CONFORMITY - 1 -

The Draper Tools policy of continuous improvement determines the right to change specification without notice. Part No. .......................................................................................................... DA12/250A Stock No. ................................................................................................................ 65958 Power................................................................................................ 12V/D.C. 9A (MAX.) Max. Pressure ........................................................................................................ 250PSI Power Cable Length ................................................................................................ 2.9M SPECIFICATION Draper tools have been carefully tested and inspected before shipment and are guaranteed to be free from defective materials and workmanship for a period of 12 months from the date of purchase except where tools are hired out when the guarantee period is ninety days from the date of purchase. Should the machine develop any fault, please return the complete tool to your nearest authorized warranty repair agent or contact Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England. Telephone: (023) 8026 6355. If upon inspection it is found that the fault occurring is due to defective materials or workmanship, repairs will be carried out free of charge. This guarantee does not apply to normal wear and tear, nor does it cover any damage caused by misuse, careless or unsafe handling, alterations, accident, or repairs attempted or made by any personnel other than the authorised Draper warranty repair agent. This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the 12 month period. Please note that this guarantee is an additional benefit and does not affect your statutory rights. Draper Tools Limited GUARANTEE

SAFETY WARNING WARNING: Please read the following instructions carefully failure to do so could lead to serious personal injury. IMPORTANT: Draper Tools recommends that this compressor should not be modified or used for any application other than that for which it was designed. If you are unsure of it’s relative applications do not hesitate to contact us in writing and we will advise you. GENERAL SAFETY RULES FOR AIR COMPRESSORS 1. KNOW YOUR COMPRESSOR Before operating the compressor, read and fully understand the starting, operating and stopping sections in this manual. Read all labels affixed to the compressor. Learn it’s applications and limitations. 2. SERVICING AND MAINTENANCE Do not service or maintain this compressor until you have read and understood the maintenance section of this manual. 3. CHECK DAMAGED PARTS Before further use of this compressor, parts that are damaged should be carefully checked to ensure that it will operate correctly and perform its intended function. Check for alignment of moving parts, breakage of parts and any other conditions that may effect its operation. A guard or other part that is damaged should be properly repaired or replaced. 4. DISCONNECT FROM POWER SUPPLY Before servicing, maintaining or replacing damaged parts ALWAYS disconnect the compressor from the power supply. 5. AVOID DANGEROUS ENVIRONMENTS Do not use the compressor in damp or wet locations or expose it to rain. Keep the work area well lit. Provide adequate surrounding work space. 6. AVOID ACCIDENTAL STARTING Make sure the power supply is off before connecting to the power supply. 7. NEVER LEAVE THE COMPRESSOR RUNNING UNATTENDED Turn the power supply off. Do not leave the compressor until it comes to a complete stop. 8. USE RECOMMENDED ACCESSORIES Only use the recommended adaptors as supplied. 9. OVERHEATING. Operation over an extended period of time will overheat the unit and damage the compressor.When this occurs stop the unit immediately and do not restart until cool, approximately 30 minutes. 10.KEEP CHILDREN AWAY Ensure the compressor is stored out of reach of small children. 11.TYRE PRESSURE The gauge on the compressor is intended as a guide only. Tyre pressures should be regularly checked against a tyre pressure gauge manufactured to BS 4613, such as Draper Stock No.26443.

GETTING TO KNOW YOUR MINI AIR COMPRESSOR Fig.1. 1. Compressor on/off switch. 2. Light on/off switch. 3. Pressure gauge. 4. Light. 5. Cigar lighter adaptor. 6. Amber lens. 7. Metal needle adaptor. 8. Plastic adaptor. 9. Metal inflating adaptor. 10. Valve connector. 11. Cigar lighter adaptor housing. �✕✌ �✖✌ �✗✌ �✘✌ �✕✔✌ �✚✌ �✛✌ �✜✌ �✢✌ �✙✌ �✕✕✌ Fig.1.

OPERATION & USE INFLATING TYRES (Fig.2 - 6): Push the connector �✪✌ onto the tyre valve with the locking lever �✫✌ in the released position. With the connector on the valve, lock it in place by folding down the locking lever �✬✌. NOTE: Listen to ensure no air loss can be heard. With the ON/OFF switch �✭✌ in the ‘OFF’ position, plug the cigar lighter adaptor �✮✌ in to the vehicles cigar lighter socket. NOTE: Some vehicles may require the ignition to be switched to the ‘ON’ position to power the cigar lighter socket. Fig.2. �✪✌ �✫✌ Fig.3. �✬✌ Fig.4. �✭✌ Fig.4. �✭✌ Fig.5. �✮✌ all-guides com

OPERATION & USE Referring to the vehicle data check the correct pressure for tyres. Turn ‘ON’ the compressor with switch �✰✌ and check the pressure in the tyre with gauge �✯✌. When the pressure is correct. Turn ‘OFF’ the compressor with switch �✰✌, unplug the cigar lighter. Loosen and remove the valve connector as quickly as possible to avoid any air lose. NOTE:When the compressor is being stored ensure the valve connector lock is in the release position. TORCH/WARNING LIGHT (Fig.7): To turn the light ‘ON’ press switch �✱✌ to the ‘|’ position. To turn the emergency light ‘ON’, press switch �✱✌ to the ‘||’ position. The amber lens is fitted, by removing the holder �✲✌. FOR INFLATABLES (Fig.8): Select the suitable adaptor and secure in the valve connector. Insert the adaptor into the item to be inflated, and begin to inflate. NOTE: Do not over inflate. Fig.6. �✯✌ �✰✌ Fig.7. �✱✌ �✲✌ Fig.4. Fig.8.

1. Poor connection 1a. Gently turn plug in between plug and cigarette lighter socket socket. until contact is made. 1b. Check plug and socket for tobacco or other obstruction. 2. Power supply fuse 2. Check cigarette lighter blown. power supply fuse. Runs but does not inflate. 1. Poor connection onto 1. Ensure the adaptor is the valve. pushed firmly onto the valve before locking into place. 2. Air escaping. 2a. Check the item for leaks. 2b. Ensure hose has no breaks or leaks at the fitting. Runs slowly. 1. Overheating. 1. Unplug from power supply and leave to cool for approx. 30 minutes. 2. Voltage too low. 2. Check condition of battery. IMPORTANT: PLEASE NOTE ALL REPAIRS/ADJUSTMENTS SHOULD BE CARRIED OUT BY A QUALIFIED PERSON. DRAPER HELPLINE: 023 8049 4344 - 7 -

Hursley Road, Chandler's Ford, Eastleigh, Hants. SO53 1YF. U.K. Helpline: (023) 8049 4344. Sales Desk: (023) 8049 4333. General Enquiries: (023) 8026 6355. Fax: (023) 8026 0784. http://www.draper.co.uk e-mail: [email protected] ©Published by Draper Tools Ltd. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd. YOUR DRAPER STOCKIST