Farlink FL701 Quick Installation Manual
Text of the manual
Quick Installation Guide
Day&Night IP Camera
Connect IP Cam to Internet
Installation CD
1. Connect the power adapter.
2. Connect the Ethernet cable to the NAT/Router.
3.The IP camera will get IP address from the NAT/Router (with DHCP
enabled) automatically and connect to internet. Check if the red
LED of IP camera is always on. If
1. Remove the Ethernet cable from the camera.
2. Press the WPS button on the IP camera.
3. Press the WPS button on the NAT/Router.
4. The blue LED on the IP camera will start blinking. If the blue LED
stops blinking and is always on in one minute, the wireless network
is connected successfully.
1
2
3
4
mCamView
3.4
CamView Software Usag
