Axis Q7401 Datasheet

compression, which drastically reduces bandwidth and storage requirements without compromising image quality. Motion JPEG is also supported for increased flexibility. AXIS Q7401 can deliver multiple, individually configu- rable video streams simultaneously at full frame rate in all resolutions up to D1 (720x480 in NTSC, 720x576 in PAL). This means that several video streams can be con- figured with different compression formats, resolutions and frame rates for different needs. The video encoder also enables users to adjust image settings such as contrast, brightness and saturation to improve images before encoding takes place. AXIS Q7401 Video Encoder is a high performance, single channel solution that integrates an analog camera into an IP-based video surveillance system. With outstanding video processing capabilities, AXIS Q7401 delivers superb video quality and significant savings in bandwidth and storage. AXIS Q7401 Video Encoder Full-featured video surveillance with outstanding H.264 performance. > Superb video quality > Multiple H.264 streams > Image setting adjustment > Intelligent video capabilities > Power over Ethernet > Audio support > Local storage AXIS Q7401 includes intelligent capabilities such as enhanced video motion detection, active tampering alarm and audio detection. The encoder’s external in- puts and outputs can be connected to devices such as sensors and relays, enabling the system to react to alarms and activate lights or open/close doors. Support for Power over Ethernet (IEEE802.3af) enables the unit, as well as the analog camera that is connected to it, to receive power through the same cable as for data transmission. This makes for easy installation since no power outlet is needed. AXIS Q7401 also supports two-way audio and has an SD/SDHC memory card slot for local storage.

www.axis.com ©2008 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX are registered trademarks or trademark applications of Axis AB in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies. We reserve the right to introduce modifications without notice. 32464/EN/R3/0807 Video encoder Video compression H.264 Motion JPEG Resolutions 176x120 to 720x576 Frame rate H.264 30/25 (NTSC/PAL) fps in all resolutions Frame rate Motion JPEG 30/25 (NTSC/PAL) fps in all resolutions Video streaming Multi-stream H.264 and Motion JPEG: 3 simultaneous, individually configured streams in max. resolution at 30/25 fps; more streams if identical or limited in frame rate/resolution Controllable frame rate and bandwidth VBR/CBR H.264 Image settings Compression, color, brightness, contrast Rotation: 90°, 180°, 270° Aspect ratio correction Mirroring of images Text and image overlay Privacy mask Enhanced deinterlace filter Pan/Tilt/Zoom Wide range of analog PTZ cameras supported (drivers available for download at www.axis.com) 100 presets, guard tour, PTZ control queue Supports Windows compatible joysticks Audio Audio streaming Two way, half-duplex Audio compression AAC-LC 8 kHz 32 kbit/s, 16 kHz 64 kbit/s G.711 PCM 8 kHz 64 kbit/s G.726 ADPCM 8 kHz 32 or 24 kbit/s Audio input/ output External microphone input or line input Line level output Network Security Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control, digest authentication, user access log Supported protocols IPv4/v6, HTTP, HTTPS, QoS layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS System integration Application Programming Interface Open API for software integration, including VAPIX® from Axis Communications available at www.axis.com Intelligent video Video motion detection, active tampering alarm, audio detection Alarm triggers Intelligent video, external inputs, video loss, disk full Alarm events File upload via FTP, HTTP and email Notification via email, HTTP and TCP External output activation PTZ presets Local storage Video buffer 64 MB pre- and post-alarm General Casing Metal casing. Standalone or wall mount Processor and memory ARTPEC-3, 128 MB RAM, 128 MB Flash Power 8-20 V DC, max. 7.2 W or Power over Ethernet IEEE 802.3af Class 2/3 Connectors Analog composite video BNC input, NTSC/PAL auto-sensing RJ-45 10BaseT/100BaseTX PoE DC terminal block: power in 8-20 V DC, max. 7.2 W or power out 12 V DC, max. 5 W I/O terminal block for four configurable inputs/outputs 3.5 mm mic/line in, 3.5 mm line out RS-485/ RS-422 Local storage SD/SDHC memory card slot (Card is not included) Operating conditions 0-50 °C (32-122 °F) Humidity 20-80% RH (non-condensing) Approvals EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 55024, EN 61000-6-1, EN 61000-6-2, FCC Part 15 Subpart B Class B, ICES-003 Class B, VCCI Class B, C-tick AS/NZS CISPR 22, EN 60950-1 Power supply PS-T: EN 60950-1, CSA, C/US Power supply PS-K: EN 60950-1, UL, cUL Weight 335 g (0.7 lb.) Included accessories Power supply, mounting and connector kits, Installation Guide, CD with installation and management tools, software and User’s Manual, 1 Windows decoder user license More information is available at www.axis.com Dimensions Optional accessories AXIS 295 Video Surveillance Joystick Power over Ethernet midspan For information on AXIS Camera Station and video management software from Axis' Application Development Partners, see www.axis.com/products/video/software/ 98.9 mm (4.6’’) 118 mm (3.9’’) 10.7 mm (0.4’’) 32.1 mm (1.3’’) RS-422/RS-485 connector Video input Audio Inputs/Outputs Network connector (PoE) Power adapter connector SD/SDHC memory card slot