croydon TI8SL Instruction Manual

IMPORTANT SAFEGUARDS When using electrical appliances, basics safety precautions should always be observed including the following: -Before connecting your blender check if voltage of your power system corresponds to the same specified on the appliance. -To protect against risk of electrical shock, do not put cord, plug, base or motor in water or other liquids. -Never connect two or more appliances in the same plug. -When not in use, unplug the blender. -Avoid contact with moving parts because blades are sharp. "Handle carefully". -Keep hands and utensils out of container while blending to prevent the possibility of severe personal injury and or damage to blender. A plastic spatula may be used but only when blender is "NOT RUNNING". -Only remove the container when blender "COMPLETELY STOPPED". - INSTRUCTIONS FOR USE -It is recommended to cut food in small pieces and maintain food below frieze height to avoid spilling. -To start blender, place small quantity of food before connecting it, and afterwards complete container placing food through service lid. -When blender is running do not remove the lid. -If blender action stops, turn blender off. Remove lid and use a plastic spatula to push mixture toward blades. Replace lid and start blender again. CLEANING PROCEDURE -Clean container (cup) with liquid soap and water filling to half capacity. -Turn on blender for some seconds. -Turn off blender, empty the container and rinse it. -Unplug blender clean body and external cup with a wet cloth. -Do not use harsh detergent or chemical products for cleaning. TI8SL-250001-B0 INSTRUCTION MANUAL TI8SL TI8SL CROYDON CROYDON CROYDONMAQ INDUSTRIAL LTDA. Estrada São Lourenço, 891 - Capivari Duque de Caxias- RJ / Brasil - CEP 25243-150 Phone: 55 21 2777- 8100 / Fax: 55 21 2777- 8106 e-mail: [email protected] - www.croydon.com.br The pictures/drawings are illustrations. All data can be changed without notification.

Polyurethane Ring Screw Cord Connection Switch (on-off) Screw Body Screw 50HZ Motor Container’s Support Screw Shaft Adapter Washer Washer Nut Underfriction Washer Nut Foot Retainer 2 4 5 6 8 9 10 23 22 21 20 17 19 11 12 14 13 12 30 15 16 26 25 24 INDUSTRIAL BLENDER 8 LITERS INDUSTRIAL BLENDER 8 LITERS Item code description Technical Data Power (HP) 1 / 2 Amperage (A) 4.4 Speed (rpm) 3430 Capacity (l/gal) 8 / 2.1 Weight (kg/lbs) 11/24.2 Dimension WxHxD (cm/in) 26/10.3 x 75/29.6 x 21/8.3 Voltage (V) 220 (50Hz) CROYDON CROYDON 1 27 28 TI8SL-250001-B0 7 Wiring Diagram L1 L2 G OFF ON MOTOR SWITCH 29 29 31 3 32