D-Link EXO AC2000 Quick Install Manual

Package Contents DAP-1820 AC2000 Wi-Fi Range Extender Quick Install Card Quick Install Guide If any of the above items are missing, please contact your reseller. • Make sure the area that you want to plug the extender into has a strong connection to your router. Use a wireless laptop, tablet, or mobile phone in that area to test th ...

3 Product Overview LED Color Status Description Status LED Red Solid The device is powering on. Amber Blinking The device is ready but not connected to a router. Green Solid Indicates that the DAP-1820 is securely connected to your wireless router or access point. Blinking The WPS button has been pushed and the device is processing a c ...

Method One: Connect to Your Router Using WPS 1 Find an available outlet near your wireless router. Plug in the DAP-1820 and wait until the Status LED is blinking amber. 2 Press the WPS (Wi-Fi Protected Setup) button on your wireless router. Within one minute, press the WPS button on the DAP-1820. The Status LED will start to blink. 3 ...

5 4 When the Status LED turns solid green, this indicates that the DAP-1820 is securely connected to your wireless router or access point. You can now unplug and move the DAP-1820 to a location between your wireless router and the area that you need wireless coverage. If after moving your DAP-1820, the signal strength indicators are s ...

Method Two: Configure the DAP-1820 Using D-Link Wi-Fi Setup 1 Scan the code below or search “D-Link Wi-Fi” (App Store or Google Play) to download the D-Link Wi-Fi App to your iPhone, iPad, or Android device. Once your app is installed, tap on the D-Link Wi-Fi icon from your mobile device. Please follow the on-screen instructions ...

7 Troubleshooting Why is my DAP-1820 not connecting or dropping signal from my router? 1. Verify that the DAP-1820 is within range of your wireless router. Try plugging it into a location closer to the router and verify the Status LED is solid green. Note: When repeating a wireless signal from a router or access point, devices connec ...

Where should I place my DAP-1820 when using it as a range extender? A Range Extender only works as well as the signal it is extending. Therefore, proper placement of your DAP-1820 is important in achieving desired results. For best performance, place your DAP-1820 in between your router and your dead zone, making sure it is placed in ...

9 What if I forgot my DAP-1820 password? 1. If you forgot your password or want to reset the DAP-1820 back to the factory default settings, press and hold the reset button on the bottom of the extender using a paper clip and release after a minimum of 10 seconds. The Status light will turn red. Note: This process will erase all your ...

GPL Code Statement This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code us ...