BDI 6451 Owner's Manual

File Specifications

Brand: BDI
Category: Indoor Furnishing
Model: 6451 (Owner's Manual), prljd4Flxe3QY
File Info: Adobe Acrobat PDF (DjVu)
File Size: —
Pages: 16 pages

Download PDF

Download BDI 6451 Manual (16 pages)

Read Online:

Read the BDI 6451 Owner's Manual online using the built-in PDF viewer. This document explains how to operate the device, adjust settings and perform regular maintenance.

Key Pages of Document

Step 3 - Secure the keypad cord into the groove using 6 cord clips H6 and 6 wood screws H2. Connect

keypad cord into the Control Module Port (labeled HS) and bundle the slack with the Hook & Loop Tie. H2 x 6 H6 x 6 Groove for Keypad Cord Hook & Loop Tie ...

Step 2 - Install Control Module and Keypad

Lay top panel upside down on a soft surface (like carpet). Attach Keypad C4 on the desired side (left or right) with 2 Wood Screws H1. Orient the Control Module C3 so that the Keypad port is facing the Keypad side and secure between the 2 steel rails with 2 Wood Screws H1 as shown. Route the Keypad cord into the groove in the panel and through the hole in the metal frame. User’s left hand side User’s right hand side C3 C4 H1 x 4 ...

Step 8 - Turn the desk upright and plug it in to adjust the height

With the help of another person, carefully flip the desk on to its feet. Plug the other end of the Power Cord into the nearest wall socket. Refer to the User Manual on Page 13 and follow the Reset Procedure. You may now adjust the height of your desk to make the remaining steps easier. 2 Person Task Step 7 - Plug the Power Cord C5 into the power port on the Control Module C3 (labeled AC). ...

Step 2 - Install Control Module and Keypad

Lay top panel upside down on a soft surface (like carpet). Attach Keypad C4 on the desired side (left or right) with 2 Wood Screws H1. Orient the Control Module C3 so that the Keypad port is facing the Keypad side and secure between the 2 steel rails with 2 Wood Screws H1 as shown. Route the Keypad cord into the groove in the panel and through the hole in the metal frame. User’s left hand side User’s right hand side C3 C4 H1 x 4 ...

If your desk is not functioning properly it may need to be reset. Follow the RESET procedure above.

If your LED readout displays an error message Er1 confirm that all wired connections are secure. Then perform the reset procedure above. ...

24.75”–49.75” (63–126 cm)

Travel Speed 1.5" per second Weight Capacity 150 lbs (68 kg) Duty Cycle 10%, Max 2 minutes with 18 minutes off Memory 4 position presets Monitor Arm Compatible Yes Setting the Upper and Lower Limits The base is designed to go to its minimum and maximum heights, allowing for the widest possible range. If you prefer to change the settings to a more narrow range, follow these steps: To set the Lower-limit position: Use the UP/DOWN buttons to move the base to th ...

BDI 6451 user guide recommended for: MARGO 5201, TANAMI 7109, CORRIDOR, Sola 6817, SECTOR 7527 Series.

⚠️ Download Safety

The Indoor Furnishing Owner's manual (16 pages) is completely safe to download (last scan date: 16/03/2026).

Related PDF Instructions for BDI 6451:

Indoor Furnishing Equipment: Frequently Requested

Have some Questions about BDI 6451 Device?

Get valuable and actionable advices from other BDI 6451 device users. Describe your problem or question, regarding the using of 6451, in as much detail as possible, and other users will be able to answer you.