Azio CAR102-I31 Quick Start Manual

Card Reader/Writer, one of the most stylish and practical internal flash memory card reader/writer solutions available. This internal multi-card reader kit is very easy to install, is memory card hot-swappable, and is backed by AZiO Corporation’s 1-year Limited Warranty. This Quick Start Guide is designed to get you up and running in the least amount of time possible. If you experience a problem with your AZiO product, please visit our product support page at: www.aziocorp.com/support.php Here you can access product FAQ’s, LiveChat support, or Customer Care contact information. Thank you again for choosing AZiO and we sincerely hope you enjoy using your new multi-card reader. PACKAGE CONTENTS When you unpack your external drive kit, be sure you have removed all the accessories and information papers. The items shown below are included with your drive kit: 1. Internal Multi-Card Reader/Writer 2. Quick Start Guide 3. Installation Screws

[STEP 1] First power off your computer and then remove the computer’s cover. Install the Multi-Card Reader/Writer into an available 3.5” drive bay of your computer.

motherboard’s internal USB pin-out headers according to its pin assignments. On most motherboards, the USB header / pin-out consists of 9 pins arranged in 2 rows and each header allows for 2 USB connects (i.e. USB1 and USB2). Normally, the pins for USB1 and USB2 are in separate rows. Replace the computer’s cover and reconnect the power cord. The Hardware installation is complete.

• For Windows XP, Windows 2000, Windows ME, MAC OS 9.x and MAC OS 10.x or higher, no drivers are required. • For Windows 98SE, please visit our website at www.aziocorp.com/support.php and download the corresponding driver. 1. Unzip the driver file and run the setup file. 2. Follow the installation wizard until setup is completed. 3. Restart your computer. 4. Your Multi-Card Reader is now ready for use.

Service If you need assistance with the product, please check the comprehensive user’s manual included in the software CD or visit our website at www.aziocorp.com for frequently asked questions and troubleshooting tips. Otherwise, you may contact our dedicated customer care team. There are several ways to contact us: By Phone: (909) 468-1198 By Email: [email protected] On LiveChat: www.aziocorp.com

AZiO Corporation warrants this product against defect in material or workmanship for 1 year from the date of purchase. If this product proves to be defective, contact AZiO Corporation’s customer care for repair or replacement of your unit. Return requests can not be process without the proof of original date of purchase. This warranty applies only to the original purchase of the product and is not transferable. This warranty does not cover any incompatibilities due to the user’s computer, hardware, software or related system configuration in which the product interfaces. The warranty does not cover any damage caused by negligence, abuse, or non- authorized modifications. To the maximum extent permitted by applicable law, in no event shall AZiO Corporation, its affiliates, or its dealers be liable for any special, incidental, indirect or consequential damages whatsoever regardless of cause or form of action.

This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio TV technician for help.