3M PS50C670 Operator's Manual

M This user manual is provided as a free service by FixYourDLP.com. FixYourDLP is in no way responsible for the content of this manual, nor do we guarantee its accuracy. FixYourDLP does not make any claim of copyright and all copyrights remain the property of their respective owners. About FixYourDLP.com FixYourDLP.com (http://www.fxyourdlp.com) is the World’s #1 resource for media product news, reviews, do-it-yourself guides, and manuals. Informational Blog: http://www.fxyourdlp.com Video Guides: http://www.fxyourdlp.com/guides User Forums: http://www.fxyourdlp.com/forum FixYourDLP’s Fight Against Counterfeit Lamps: http://www.fxyourdlp.com/counterfeits RecycleYourLamp.org – Free lamp recycling services for used lamps: http://www.recycleyourlamp.org Lamp Research - The trusted 3rd party lamp research company: http://www.lampresearch.com Discount-Merchant.com – The worlds largest lamp distributor: http://www.discount-merchant.com Sponsors: Sponsors: Disclaimer Disclaimer

Operator’s Guide Projecteur multimédia MP8760 Guide d’utilisation MP8760 Multimedia-Projektor Bedienerhandbuch Proyector de medios múltiples (multimedia) MP8760 Guía del operador Guida dell’operatore del proiettore multimediale MP8760 Bruksanvisning för MP8760 Multimediaprojektor 3M MP8760 Multimediaprojector Gebruiksaanwijzing THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

3M Multimedia Projector MP8760 i ENGLISH MP8760 Multimedia Projector Table of Contents SAFEGUARDS.......................................................................................................................................................................ii WARRANTY.........................................................................................................................................................................iv SECTION 1: UNPACK ......................................................................................................................................................... 1 1-1. CONTENTS OF SHIPPING BOX..................................................................................................................................... 1 1-2. KEEP YOUR PACKING MATERIALS............................................................................................................................ 1 1-3. WHAT’S NEXT?.......................................................................................................................................................... 1 SECTION 2: PRODUCTION DESCRIPTION ................................................................................................................. 2 2-1. MACHINE CHARACTERISTICS .................................................................................................................................... 2 2-2. PARTS IDENTIFICATION LIST ..................................................................................................................................... 2 SECTION 3: SET UP/CONNECTIONS............................................................................................................................. 3 3-1. TERMINAL CONNECTION PANEL ............................................................................................................................... 3 3-2. OPERATOR TOUCH PANEL KEYPAD .......................................................................................................................... 3 3-3. MOUSE CONNECTION................................................................................................................................................. 4 3-4. CABLE CONNECTIONS................................................................................................................................................ 4 3-5. IMAGE SIZE (PROJECTOR-TO-SCREEN DISTANCE).................................................................................................... 5 3-6. IMAGE HEIGHT........................................................................................................................................................... 6 SECTION 4: OPERATING INSTRUCTIONS.................................................................................................................. 7 4-1. POWER UP PROJECTOR .............................................................................................................................................. 7 4-2. STANDBY MODE ........................................................................................................................................................ 8 4-3. PROJECTOR POWER DOWN ........................................................................................................................................ 8 4-4. USING SYSTEM MENUS.............................................................................................................................................. 8 4-5. MENU ADJUSTMENTS/SETTINGS ............................................................................................................................... 9 SECTION 5: REMOTE CONTROL................................................................................................................................. 13 5-1. REMOTE CONTROL FUNCTIONS............................................................................................................................... 13 5-2. MEANING OF THE ICONS......................................................................................................................................... 14 5-3. BATTERY REPLACEMENT......................................................................................................................................... 16 SECTION 6: MAINTENANCE ......................................................................................................................................... 17 6-1. REPLACING THE AIR FILTER.................................................................................................................................... 17 6-2. REPLACING PROJECTION LAMP ............................................................................................................................... 18 6-3. LAMP LIFE INDICATOR............................................................................................................................................. 19 6-4. CLEANING THE PROJECTOR ..................................................................................................................................... 19 SECTION 7: TROUBLESHOOTING .............................................................................................................................. 20 7-1. TROUBLESHOOTING PROBLEMS AND SOLUTIONS................................................................................................... 20 7-2. SERVICE INFORMATION ........................................................................................................................................... 22 SECTION 8: PRODUCT SPECIFICATIONS................................................................................................................. 23 8-1. TECHNICAL SPECIFICATIONS................................................................................................................................... 23 8-2. ACCESSORY & SPARE PARTS LIST.......................................................................................................................... 24 8-3. HOW TO ORDER ....................................................................................................................................................... 24 APPENDIX............................................................................................................................................................................ 25 THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

 3M IPC 2000 ENGLISH WARNING Safeguards INTENDED USE Before operating the machine, please read the entire manual thoroughly. The 3M Multimedia Projector MP8760 was designed, built, and tested for use indoors, using 3M lamps, 3M ceiling mount hardware and nominal local voltages. The use of other replacement lamps, outdoor operation, operation in environments containing heavy cigarette smoke or different voltages has not been tested and could damage the projector or peripheral equipment and/or create a potentially unsafe operating condition. IMPORTANT SAFEGUARDS 1. Read and understand all instructions before using. Pay particular attention to areas where this symbol ! is shown. Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. ! Caution - Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury. It may also be used to alert against unsafe practices. ! Note - Used to emphasis important conditions or details. 2. Close supervision is necessary when any appliance is used by or near children. Do not leave appliance unattended while in use. 3. Never look directly into the projector lens when the lamp is on. The NTP (New Tip Placement) lamp produces a strong light that could damage your eyesight. ! 4. Care must be taken as burns can occur from touching hot parts. 5. Do not operate appliance with a damaged cord or if the appliance has been dropped or damaged - until it has been examined by a qualified service technician. ! 6. Position the cord so that it will not be tripped over, pulled or contact hot surfaces. 7. If an extension cord is necessary, a cord with an earth/ground and a current rating at least equal to that of the appliance should be used. Cords rated for less amperage than the appliance may overheat. 8. Always unplug appliance from electrical outlet before cleaning and servicing and when not in use. Grasp plug and pull to disconnect. 9. To reduce the risk of electric shock, do not immerse this appliance in water or other liquids. 10. To reduce the risk of electric shock, do not disassemble this appliance or attempt to service it yourself. Take it to a qualified technician when service or repair work is required. Incorrect reassembly can cause electric shock when the appliance is subsequently used. 11. The use of an accessory attachment not recommended by the manufacturer may cause a risk of fire, electric shock, or injury to persons. 12. Connect this appliance to a grounded outlet. ! 13. This unit is equipped with optical lenses and should not be exposed to direct sunlight. 14. Keep ventilation openings free of any obstructions. 15. Always operate machine on a flat, sturdy surface. 16. The projection lamp contains mercury. Always dispose of it in a proper manner according to local regulations. 17. To avoid premature lamp failure, do not change the mounting position of the projector (desktop ⇒ ceiling mount or ceiling mount ⇒ desktop mount) and continue to use the same lamp. 18. To avoid deposits from forming on internal components, do not operate projector in extremely humid environments (RH > 80%) or near any type of fine mist. THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

3M Multimedia Projector MP8760 iii ENGLISH PRODUCT SAFETY LABELS The following safety labels are used on or within the MP8760 projector to alert you to items or areas requiring your attention: LOCATION OF LABELS SAVE THESE INSTRUCTIONS The information contained in this manual will help you operate and maintain your 3M MP8760 Multimedia Projector. Inside of projector gets very HOT! Allow internal parts to cool before replacing the lamp. THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

 3M IPC 2000 ENGLISH Warranty LIMITED WARRANTY 3M warrants this product against any defects in material and workmanship, under normal use and storage, for a period of two years from date of purchase. Proof of purchase date will be required with any warranty claim. In the event this product is found to be defective within the warranty period, 3M’s only obligation and your exclusive remedy shall be replacement of any defective parts (labor included). To obtain warranty service, immediately notify the dealer from which you purchased the product of any defects. In the USA call 1–800–328–1371 for warranty or repair service. Exclusion to Warranty The projection lamps are considered a consumable item and are warrantied for 90 days or 180 hours of operation whichever occurs first. LIMITATION OF LIABILITY THE FOREGOING WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND 3M SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 3M SHALL NOT BE LIABLE FOR ANY DAMAGES, DIRECT, CONSEQUENTIAL, OR INCIDENTAL, ARISING OUT OF THE USE OR INABILITY TO USE THIS PRODUCT. Important: The above warranty shall be void if the customer fails to operate product in accordance with 3M’s written instructions. This warranty gives you specific legal rights and you may have other rights that vary from state to state. FCC STATEMENT - CLASS A: This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual may cause interference to radio communications. It has been tested and found to comply with the limits for a Class “A” computing device pursuant to Subpart B of Part 15 of the FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his/her own expense will be required to take whatever measures may be required to correct the interference. EEC STATEMENT: This machine was tested against the 89/336/EEC (European Economic Community) for EMC (Electro Magnetic Compatibility) and fulfills these requirements. Video signal cables: Only use cables delivered by the manufacturer. Video inputs: The input signal amplitude must not exceed the specified level. PATENTS, TRADEMARKS & COPYRIGHTS IBM and PS/2 are registered trademarks of International Business Machines Corporation. Apple Macintosh and ADB are registered trademarks of Apple Computer, Inc. Microsoft Windows is a trademark of the Microsoft Corporation. DLP is a trademark of Texas Instruments Incorporated. All other products are trademarks or registered trademarks of their respective companies. THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

3M Multimedia Projector MP8760 1 ENGLISH Section 1: Unpack 1-1. Contents of Shipping Box The MP8760 is shipped with the necessary cables required for standard VCR, PC or laptop computer connections. Carefully unpack and verify that you have all of the items shown below in Figure 1–1. If any of these items are missing, please contact your place of purchase. Item Quantity 1. MP8760 Multimedia Projector 1 2. IR Remote control transmitter 1 (Two AAA batteries included) 2 3. Power cord set (US, UK, Europe) 1 4. VGA cable (2m) 1 5. RCA Video/ Audio (3m) 1 Item Quantity 6. S-VHS video cable (3m) 1 7. PS/2-Mouse-Adapter 1 8. Serial Mouse cable 1 9. Operator’s Guide, 7 languages(not shown) 1 10. Registration card 1 11. Telephone (800#) stickers 2 Figure 1-1. Packing List 1-2. Keep Your Packing Materials Save the shipping box and packing materials in the event the MP8760 should require shipping to a 3M Service Center for repair. Use packing material to protect projector. 1-3. What’s Next? Take a few minutes to review Section 2 to familiarize yourself with the MP8760 machine characteristics and then turn to Section 3 to set up the projector. We hope you will enjoy using this high performance product in your meetings, presentations and training sessions. This product has been produced in accordance with 3M’s highest quality and safety standards to ensure smooth and trouble-free use in the years to come. 3 1 2 4 7 5 6 ENTER FOCUS ZOOM PC MENU VIDEO AUDIO 1 2 3 4 5 6 7 8 9 0 VOL BRIGHT REVEAL — + BLANK DRAG CH— CH+ TIMER OPTIMIZE TEXT WINDOW MOUSE POINTER MODE 1-2-3-4 INFO MAGNIFY FREEZE 8 !!! ! Note A set of cables/adapters for connection to Apple Macintosh computers is available as an option. THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

 3M IPC 2000 ENGLISH Section 2: Production Description 2-1. Machine Characteristics The MP8760 integrates NTP lamp and Digital Light Processor (DLP) technology. It accepts input from computer and/or video sources and projects a super bright image. The MP8760 Multimedia Projector is easy to set up and use. It offers the following features: • Extremely light weight and portable • NTP projection lamp 350W • VGA (640 x 480) expansion • SVGA (800 x 600) expansion • XGA (1024 x 768) native resolution • SXGA (1280 x 1024) compressed • NTSC, PAL, SECAM compatible • Ability to display 16.7 million colors • Two computer input connections each with a separate audio-in connection • Built-in Serial, PS/2 and ADB mouse emulation • Three video/audio input connections • Power focus, zoom and height shift • Full function remote control • Surround sound system • Horizontal and vertical image inverting function allows rear screen and ceiling mounted projection • On-screen menu for easy projector set up • Menus display in English, German, French, Spanish, Italian, Dutch, Swedish • 0-12 degree adjustable keystone correction 2-2. Parts Identification List 1. Infrared Remote Control Transmitter 2. 3 Speakers (Surround Sound System) 3. Operator Touch Panel 4. Exhaust Fan 5. Terminal Connections 6. Height Adjustment Foot 7. Projection Lens 8. Air intake/air filter 9. Carry Handle 10. Release Button (height adjustment foot) 11. AC Power Connection 12. AC Power Switch 13. Lamp Door 14. Lamp Door Release Button 15. Infrared Sensor AUX SVHS / AUDIO IN VIDEO 1 / AUDIO IN VIDEO 2 / AUDIO IN MONITOR RS232 PC / RGB 2 PC / RGB 1 AUDIO IN AUDIO OUT O I 1 6 EPS-19A 12 5 8 2 4 3 7 9 10 14 11 13 15 ENTER FOCUS ZOOM PC MENU VIDEO AUDIO 1 2 3 4 5 6 7 8 9 0 VOL BRIGHT REVEAL — + BLANK DRAG CH— CH+ TIMER OPTIMIZE TEXT WINDOW MOUSE POINTER MODE 1-2-3-4 INFO MAGNIFY FREEZE Figure 2-1. Parts Identification THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

3M Multimedia Projector MP8760 3 ENGLISH Section 3: Set Up/Connections 3-1. Terminal Connection Panel The MP8760 projector has terminal connections on the backside of the projector. Refer to Section 3.4-Cable Connections for more detail. 1. AUX: Only compatible with 3M devices. 2. SVHS/AUDIO IN: SVHS and audio input. 3. VIDEO1/AUDIO IN: Video1 and audio input. 4. VIDEO2/AUDIO IN: Video2 and audio input. 5. RS-232C: Mouse emulation/external projector control. 6. MONITOR: Output to external monitor. 7. PC/RGB1: Video input #1 from computer. 8. PC/RGB2: Video input #2 from computer. 9. AUDIO IN2: Audio L/R input from computer #2 10. AUDIO IN1: Audio L/R input from computer #1. 11. AUDIO OUT: Audio L/R output to external audio system. 3-2. Operator Touch Panel Keypad The MP8760 operator touch panel keypad (Figure 3-2) is located on top of the projector. Refer to Section 4 for more detail on using the keypad. 1. Zoom: Adjust (decrease/increase) image size. 2. Video: Select Video1, Video2 or S-VHS input 3. PC: Select PC/RGB 1/2 input. 4. Enter: Initiate drop windows, toggle check box (on/off), display Info sub-menu or press and hold then use Disc Pad to reposition menu location. 5. Volume (-/+): Adjust (increase/decrease) audio level. 6. Mute: Toggle speakers on/off. 7. Brightness (-/+): Adjust image brightness. (See Menu.) 8. Disc/Pad: Move cursor up/down, left/right. 9. Menu: Display/remove menus. Menu (-/+): Increase/decrease menu value. 10. Aux: Toggle On/Off a 3M compatible device. 11. Focus: Adjust image focus. 12. Standby: Switch between standby mode (lamp off, fan off after cool down) and projection mode (lamp on, fan on). Figure 3-2. Operator Panel Keypad ENTER FOCUS ZOOM PC MENU VIDEO AUX + + — — 1 2 3 11 10 9 8 7 6 12 4 5 AUX SVHS / AUDIO IN VIDEO 1 / AUDIO IN VIDEO 2 / AUDIO IN MONITOR RS232 PC / RGB 2 PC / RGB 1 AUDIO IN AUDIO OUT 2 1 3 4 6 8 9 10 5 7 AUX SVHS / AUDIO IN VIDEO 1 / AUDIO IN VIDEO 2 / AUDIO IN MONITOR RS232 PC / RGB 2 PC / RGB 1 AUDIO IN AUDIO OUT O I Figure 3-1. Input Connection Terminals THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

 3M IPC 2000 ENGLISH 3-3. Mouse Connection The MP8760 has mouse emulation capability. Connect your computer mouse to the MP8760 and control computer mouse functions using the remote control. 1. Power down the computer and projector. 2. Remove the mouse cable connection from your computer mouse port. 3. Connect the 9-pin D-Sub plug on the mouse cable to the RS-232 port on the projector. 4. RS-232 Serial Mouse: Connect 9-pin D-Sub plug on mouse cable to the serial port on the computer. PS/2 Mouse: Connect 9-pin D-Sub plug on mouse cable to PS/2 adapter and connect the 6-pin Mini-DIN adapter plug to the PS/2 port on the computer. MAC ADB: Connect 9-pin D-Sub plug on mouse cable to the Mac ADB adapter and connect the 4-pin Mini-DIN plug on ADB adapter to the ADB port on the computer. (The Mac ADB adapter is an accessory item that must be ordered separately) !!! ! Note For serial mouse connections to a laptop computer, refer to the manufacturer’s operating instructions. The internal pointing device or serial port configurations may need to be changed. 5. First, power on the projector, then power on the computer. !!! ! Note Mouse emulation only works, when all cable connections are established and the proper start up sequence is followed. See section 4–1. !!! ! Note The recommended mouse drivers for mouse emulation is the Standard Microsoft Mouse, Serial or PS/2. 3-4. Cable Connections 1. Turn off all power to the projector and input sources during cable hook up. ! Caution To prevent damage to equipment, all power to MP8760 and input sources must be turned OFF during cable hook up. 2. Connect cables being careful not to bend any pins in the cable plug or input terminal (Figure 3-1). 3. Start up projector then start up input sources. Section 4–1. THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

3M Multimedia Projector MP8760 5 ENGLISH Cable Connection, continued AUDIO 2 AUX SVHS / AUDIO IN VIDEO 1 / AUDIO IN VIDEO 2 / AUDIO IN MONITOR RS232 PC / RGB 2 PC / RGB 1 AUDIO IN AUDIO OUT O I VIDEO 1 / AUDIO IN VIDEO 2 / AUDIO IN VCR Audio L/R Video IN OUT OUT OUT WHT RED YEL IN IN RGB IN MONITOR RS232 PC / RGB 2 PC / RGB 1 AUDIO IN AUDIO OUT EPS-49A MONITOR PORT CRT Display PC PC Laptop MAC OUT IN IN OUT OUT MONITOR PORT PS/2 or SERIAL PORT RGB IN CONTROL RGB OUT Power AUX SVHS / AUDIO IN Laser Disc OUT OUT RED WHT OUT IN IN IN S-VHS Audio Left AUDIO 1 Audio Right MAC Figure 3-4. Cable Connections Audio cable optional MAC cable optional THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

 3M IPC 2000 ENGLISH 3-5. Image Size (Projector-to-Screen Distance) Adjust the size of the projected image using the zoom control buttons. The projected image size values, as they relate to the distance-to-screen value, are shown for focal lengths of f=25mm and f=45mm. Also shown is the maximum image height shift value that can vary depending on the focal length and the distance-to-screen. Figure 3.4. Maximum (f=25mm) Minimum (f=45mm) Distance to Screen m (ft.) Image Width m (in.) Image Height m (in.) Max Height m (in.) Image Width m (in.) Image Height m (in.) Max Height m (in.) 2.00 (6.56) 1.42 (56.0) 1.06 (41.7) 0.43 (16.9) 0.80 (31.5) 0.60 (23.6) 0.24 (9.5) 2.50 (8.20) 1.76 (69.3) 1.32 (52.0) 0.54 (21.3) 0.99 (39.0) 0.74 (29.1) 0.30 (11.8) 3.00 (9.84) 2.11 (83.1) 1.57 (61.8) 0.64 (25.2) 1.18 (46.5) 0.89 (35.0) 0.36 (14.2) 5.00 (16.40) 3.48 (137.0) 2.60 (102.4) 1.06 (41.7) 1.96 (77.2) 1.47 (57.9) 0.60 (23.6) 7.00 (22.97) 4.85 (191.0) 3.62 (142.5) 1.47 (57.9) 2.73 (107.5) 2.05 (80.7) 0.83 (32.7) 10.00 (32.81) 6.90 (271.7) 5.16 (203.2) 2.10 (82.7) 3.88 (152.8) 2.92 (115.0) 1.18 (46.5) Figure 3.4. Image Size/Maximum Image Height 3-6. Image Height Use the Picture menu/Height option to shift (upward) the projected image. The center of the projected image can be shifted a maximum of 12 degrees without incurring any keystoning. Figure 3.5. Figure 3.5. Maximum Image Shift EPS-47A Zero Shift Max. Shift 12 Degree Maximum Shift THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

3M Multimedia Projector MP8760 7 ENGLISH Section 4: Operating Instructions 4-1. Power Up Projector Read the Important Safeguards before operating the MP8760 projector. After all cable connections have been completed, the projector can be powered up. During operation, keep the exhaust and intake air vents clear of obstructions to allow proper cooling. ! Caution Allow a projector that has been stored in a cold place to warm up to room temperature before applying power. Figure 4-1. Power Up Projector 1. Press the Main Power switch (1) to ON. A red LED indicator will illuminate to indicate there is power. 2. Press the Standby button (2) to illuminate the lamp. A red LED indicator will turn green as an image appears and grows brighter on the screen. 3. Check all ventilation slots (3) and clear away all obstructions. !!! ! Note Ventilation vents are located on the top and back of the projector. Do not block airflow by placing objects on top of the projector. 4. Adjust the Focus (4) and Zoom (5) for best image. 5. Press the Foot Release button (6) to release the height adjustment foot (7). 6. Power up your computer and video source(s). !!! ! Note In most cases, the projector will automatically adjust to the graphic mode of your computer by selecting a pre-programmed setting. ENTER FOCUS ZOOM PC MENU VIDEO AUX + + — — EPS-18A O I 3 1 5 6 7 4 2 THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

 3M IPC 2000 ENGLISH 4-2. Standby Mode When the projector is not being used, place it into standby mode. 1. Press the Standby button. 2. The lamp will switch off and the red LED will illuminate. !!! ! Note The fan motor will continue to run for a few minutes until the projector cools down and then the fan will turn off. 3. Press the Standby button again to illuminate the lamp and project an image on the screen. 4-3. Projector Power Down 1. Press the Standby button to place the projector in the standby mode (red LED illuminates). 2. Wait until the cooling fan motor cycles off and the lamp LED turns off. !!! ! Note Switching the main power off before the fan has cycled off will decrease the life of the projection lamp. 3. Press the Main Power switch to Off. 4. Turn off the power to your input devices. 5. Install lens cap to protect projection lens. 6. To transport the projector, disconnect all power and connection cables. 4-4. Using System Menus Main Menu: Press the Menu button on the operator touch panel keypad (Figure 3-3) or the remote control keypad (Figure 5-1) to display the Main Menu. The menu name (1) is on the top line. An arrowhead (2) at the right of a menu line indicates that this item is a sub-menu that can be selected. A text field (3) at the right of a line indicates that this is a value that you can change in a drop down window. Info: Press Enter to display the Info window. To select a sub-menu, press the Disc Pad up or down to highlight (select) the desired sub-menu (2). Then press the Disc Pad to the right or the Enter button to display the sub-menu (see Sub-Menu). To change a text field value, press the Disc Pad up or down to highlight (select) the menu line (3). Then press the Disc Pad to the right or the Enter button to display a drop down window of all the possible values. Use the Disc Pad to select a value and press Enter to initiate the selection. To exit a sub-menu, press the Disc Pad to the left. To completely exit the menu system and return to the projected image, press the Menu button. Main Menu Picture Audio Tools Signal source PC/RGB1 User Interface Advanced Setup Info 1 3 2 THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

3M Multimedia Projector MP8760 9 ENGLISH Sub-Menu: Select the desired sub-menu (see Main Menu). Press the Disc Pad to the right or the Enter button to display the sub-menu. The sub-menu name (1) is on the top line. A check box field (2) at the right of a sub-menu line indicates that you can toggle that value On/Off by pressing the Enter button. A slider bar (3) at the right of a sub-menu line indicates you can increase or decrease the value. A number field (4) at the right of a sub-menu line indicates that you can change it. To change a slider bar value, it must be highlighted. Press the +/– button on the remote control or Bright +/– button on the operator touch panel to increase or decrease the value. To change a number field, press the Disc Pad up or down to highlight (select) the menu line. Then press the +/– button on the remote control or Bright +/– button on the operator touch panel to increase or decrease the amount of the value. 4-5. Menu Adjustments/Settings The following charts lists all the menu items that can be adjusted along with the default settings. Main Menu Description / Action Default Setting Picture Display picture submenu Audio Display audio submenu Tools Display tools submenu Source (drop down window) Select input source (PC/RGB1 / PC/RGB2 / SVHS / VIDEO 1 / VIDEO 2 / AUX) According to search procedure User Interface Display user interface submenu Advanced Setup Display advanced setup submenu Info Display information window (press Enter) In active PC/RGB mode: Picture (PC/RGB) Submenu Items Description / Action Default Setting Height Adjust projected image height Brightness Adjust the brightness Contrast Adjust the contrast Optimize Set best brightness for image Hor. Position Adjust horizontal position of image Ver. Position Adjust vertical position of image Tracking Adjust number of pixels per line Sync Adjust phase synchronization Mode Select data mode to adjust within this menu (Predefined modes / User Mode 1…3) Resolution (drop down window) Select pixel resolution (640x350 / 720x350 / 640x400 / 720x400 / 640x480 / 800x600 / 832x624 / 1024x768 / 1152x864 / 1152x870 / 1152x900 / 1280x960 / 1280x1024) Main Menu Picture Audio Tools Signal source PC/RGB1 User Interface Advanced Setup Info Picture Height Brightness Contrast Optimize Hor. Position Ver. Position Tracking 1312 Sync Mode VESA 1024 x 768 75Hz Resolution 1024 x 768 Tools Freeze Magnify Factor Timer off Minutes 10 1 2 3 4 THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

 3M IPC 2000 ENGLISH 4-5. Menu Adjustments/Settings, continued In active Video mode: Picture (Video) Submenu Items Description / Action Default Setting Height Adjust projected image height Brightness Adjust the brightness Contrast Adjust the contrast Color Adjust color saturation Tint Adjust HUE for NTSC Audio Submenu Items Description / Action Default Setting Volume Adjust volume Audio Audio mute -on / -off -on Speaker Speakers -on / -off -on Balance Adjust balance Treble Adjust treble Bass Adjust bass Surround Adjust surround sound level Tools Submenu Items Description / Action Default Setting Freeze Freeze frame -on / -off -off Magnify Magnify mode -on / -off -off Factor Adjust magnification factor Timer Select timer mode (off / small / large) off Minutes Adjust timer countdown (1 to 90 minutes) 10 minutes User Interface Submenu Items Description / Action Default Setting Language (drop down window) Select user interface language (English / Deutsch / Français / Español / Italiano / Nederlands / Svenska) English Blank Screen Color (drop down window) Select color of Blank Screen (Black / Red / Green / Blue / Yellow / Cyan / Magenta / White) Black Graphics Activate on-screen status bar indicators and icons. (e.g. ) -on / -off -on Reset Window Position Reset all menu window position to default Help (drop down window) Select Help window mode (immediate / 1, 3, or 5 seconds / off) 3 seconds Audio Volume Audio Speaker Balance Treble Bass Surround Tools Freeze Magnify Factor Timer off Minutes 10 User Interface Language English Blank Screen Color Black Graphics Reset Window Position Help 3 seconds Picture Height Brightness Contrast Color Tint THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

3M Multimedia Projector MP8760 11 ENGLISH 4-5. Menu Adjustments/Settings, continued In active PC/RGB mode: Advanced Setup (PC/RGB) Submenu Items Description / Action Default Setting Projection (drop down window) Select projection orientation (standard / Rear / Rear/Ceiling / Ceiling) standard Color Manager Display Color Manager submenu Remote Control Remote control receiver -on / -off -on RC Address Select remote control address (1 / 2 / 3 / 4) 1 Sync Mode1 (drop down window) Select Sync Mode for PC/RGB1 (separate TTL / composite TTL / separate ana. / composite ana. / sync on green) separate TTL Sync Mode2 (drop down window) Select Sync Mode for PC/RGB2 (separate TTL / composite TTL / separate ana. / composite ana. / sync on green) separate TTL SOG Level Adjust level for sync on green synchronization Reset Data Modes Set all data modes to factory default settings. Reset lamp display Resets the lamp hours displayed on the Info window Test Display test submenu In active Video mode: Advanced Setup (Video) Submenu Items Description / Action Default Setting Projection (drop down window) Select projection orientation (standard / Rear / Rear/Ceiling / Ceiling) standard Color Manager Display Color Manager submenu Remote Control Remote control receiver -on / -off -on RC Address Select remote control address (1 / 2 / 3 / 4) 1 Video standard (drop down window) Select Video standard (PAL B,G,H,I / NTSC M / SECAM / NTSC 44 / PAL M / PAL N / PAL 60 / NTSC COMB / automatic) automatic Reset lamp display Resets the lamp hours displayed on the info window Test Display test submenu Advanced Setup Projection standard Color Manager Remote Control RC Address 1 Video standard automatic Reset lamp display Test Advanced Setup Projection standard Color Manager Remote Control RC Address 1 Sync Mode1 separate TTL Sync Mode2 separate TTL SOG level Reset Data Modes Reset lamp display Test THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

 3M IPC 2000 ENGLISH 4-5. Menu Adjustments/Settings, continued Color Manager Submenu Items Description / Action Default Setting Brightness red Adjust brightness for red portion Contrast red Adjust contrast for red portion Brightness green Adjust brightness for green portion Contrast green Adjust contrast for green portion Brightness blue Adjust brightness for blue portion Contrast blue Adjust contrast for blue portion Default Sets color settings to default values Test Submenu Items Description / Action Default Setting Parameter display Parameter display window -on / -off -off Color test picture Display color test picture Frame test picture Display frame test picture Info (display only) Description / Action Hardware Current hardware level Firmware Current firmware level VESA xxxxxxxxxx Current data or video mode Lamp (bar indicator) Lamp life hours (Green: lamp good / red: lamp needs replacement) OK! Closes the Info display by pressing the Enter button Test Parameter display Color test picture Frame test picture 3M MP8760 Hardware: xxx-x.xx-x Firmware: xxx-x.xx VESA 1024 x 768 75 Hz Lamp OK! Color Manager Brightness red Contrast red Brightness green Contrast green Brightness blue Contrast blue Default THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

3M Multimedia Projector MP8760 13 ENGLISH Section 5: Remote Control 5-1. Remote Control Functions Aim the remote control toward the projection screen or at the sensor. Press desired remote button to send a signal to the projector. An icon will display to indicate a presentation tool is active. Pointer Freeze image Mouse Mute Magnify image Reveal image ! Note The buttons marked with an asterisk (*) also appear on the operator touch panel keypad. ENTER FOCUS ZOOM PC MENU VIDEO AUX 1 2 3 4 5 6 7 8 9 0 VOL BRIGHT REVEAL – + BLANK DRAG CH– CH+ TIMER OPTIMIZE TEXT WINDOW MOUSE POINTER MODE 1-2-3-4 INFO MAGNIFY FREEZE EPS A L R *Standby: Switch the projector between Standby mode (lamp off, fan off) and operation mode (lamp on fan on) *Zoom: Increase (+) or decrease (-) size of displayed image. *Menu: Display system menus. *PC: Switch to PC mode. In PC mode, toggles between RGB1 & RGB2. *Focus: Adjust focus (+/-) of displayed image. *Video: Switch displayed image to video input. In Video mode , toggles between: Video1 / Video2 / SVHS *Bright: Increase (+) or decrease (-) brightness of displayed image. *Enter: Mouse emulation ON, left mouse button. Mouse emulation OFF, Enter button for confirmation of a selection. *Mute: Toggle On/Off the audio sound. *Volume: Increase (+) or decrease (–) speaker volume. Disc Pad (mouse pointer): Move (point) the cursor on the projected image. Navigate menus. See Pointer. Window: Toggle between full screen and centered display mode (Non-XGA modes only!!!) Mode 1,2,3,4: Toggle between remote control addresses 1, 2, 3, 4. (See Appendix ?) Drag: Lock left mouse button. Optimize: Adjust brightness and contrast for best picture. Reveal: Press Reveal to cover the image on the screen with a gray mask. Use the Disc Pad to reveal the image. Press Reveal again to return full screen projection of image. Text: Not used. Blank: Replace projected image with white background. Press again to return image. Timer: Displays timer (window in lower part of screen). Repeated operation of key toggles on/off. Mouse: Toggle mouse emulation On/Off. On: The L & R buttons operate left & right mouse key functions. Drag-and-drop functions are possible by pressing the Drag button. Disc Pad moves Mouse pointer. Off: L button is the Enter confirmation button. R button is for menu window. Disc Pad centers image. positioning. Disc Pad centers image. Freeze: Stores (freezes) the projected image. Press again to return the projection of the current image. Magnify: Press to enable magnification mode. Press +/- buttons to increase/decrease the magnification factor. Move Disc Pad to displace the magnified area within the image. Press Magnify again to toggle back to normal presentation. In video mode (NTSC only), press Magnify to toggle between scaled and unscaled representation. Pointer: Place a pointing device on the screen. Use Disc Pad to move pointer. Info: Display information window. Aux: Toggle On/Off a 3M compatible device. Menu window position: In mouse emulation mode: right mouse Button (R). Not in mouse emulation mode: keep button pressed while moving menu window with Disc Pad around THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

 3M IPC 2000 ENGLISH 5-2. Meaning Of The Icons An icon will display to indicate a presentation tool is active. Pointer mode Activate with Pointer button on IR-Remote control In the Pointer mode you can move a pointer over and arround the picture area. By pressing the Pointer button on the remote control a second time it will be turned off. Freeze mode Activate with Freeze button on IR-Remote control In the Freeze mode the picture will be freezed. Pressing the Freeze button on the remote control a second time or the Magnify button, the freeze mode will be turned off. Magnify mode Activate with Magnify button on IR-Remote control In the magnify mode the image can be magnified (zoomed). With the –(1) and +(3) buttons you can decrease or increase the magnifying factor. You can select the magnified area by using the Disc Pad. Pressing the Magnify button on the remote control a second time, the magnify mode will be turned off. Reveal mode Activate with Reveal (7) button on IR-Remote control In the reveal mode the picture will be covered by a grey sheet. You now can reveal the covered image by using Disc Pad. Pressing the Reveal button on the remote control a second time, the reveal mode will be turned off. Muting mode Activate with Mute button on IR-Remote control In the muting mode the sound output of the projectors internal speakers and the external output will be muted. Pressing the Mute button on the remote control a second time, the muting mode will be turned off. Mouse emulation (Only in data mode [PC/RGB _] available!) Activate with Mouse button on IR-Remote control If you’ve connected the projector with the mouse cable and the right adapters to your PC and turned on the projector before booting the PC it will emulate a mouse over the IR remote control transmitter. By pressing the Mouse button on the IR remote control the mouse emulation will be activated. You can move arround the mouse pointer with the Disc Pad. The Disc Pad is pressure sensitive, that means so stronger you press the pad so faster the mouse pointer will move. The mouse buttons will be emulated by the two buttons left and right beside the Discpad. . The drag function can be emulated by the Drag (2) button below the Disc Pad. The mouse emulation can be turned off by pressing the Mouse button a second time. THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

3M Multimedia Projector MP8760 15 ENGLISH 5-2. Meaning Of The Icons, continued Question mark A question mark in a box will appear if the projector can’t recognize the mode of the data input source. Even if you select a standard VESA mode on your system this can happen, because some device drivers of the graphic cards in the PC using timing parameters which differ from the parameters given out from the VESA organization. As a result of this, the projector may detects a wrong predefined data mode or switches to a User mode, so you may see only a part of the whole picture. To correct this situation you must select manually a data Mode in the Picture menu which should match the mode you’ve selected on the PC. If there is no matching mode you must select a User mode. In a User mode you can manually select the Resolution which is normally not choosable. It may be necessary to correct the Horizontal and Vertical Position and the Tracking and Sync values in the Picture menu. These values will be stored so the mode can be recognized the next time. If you’ve accidently misadjusted the values of a standard predefined data mode, you can reset them by selecting Reset Data Modes in the Advanced Setup menu. The settings of a User mode won’t be affected by this action. Optimize The image optimize process ist just in progress – please wait a few seconds! Looking for signal source... The projector can not find any input signal on the video and data inputs. Either there is no input source connected to the projector or the source is giving no output signal. For RGB/PC input sources you must manually select another Sync Mode recognition in the Advanced Setup menu. THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

 3M IPC 2000 ENGLISH 5-3. Battery Replacement The remote control uses two AAA batteries. The battery cover is located on the back of the remote control. 1. Press the locking tab (1) to release door. Figure 5-1. 2. Lift up on the door (2) to remove it and set it to the side. 3. Remove old batteries. 4. Install new batteries (3). Make sure the polarity (+/-) on each battery matches the decal. 5. Replace battery compartment door. Figure 5-1. Replacing Batteries THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

3M Multimedia Projector MP8760 17 ENGLISH Section 6: Maintenance 6-1. Replacing The Air Filter For best performance, replace the air filter each time the projection lamp is changed. !!! ! Note Periodically check air filter for excess dust or dirt. Replace or clean as needed. 1. Unplug the power cord (1) of the projector. 2. Unscrew two screws (2) securing back panel. 3. Remove the back panel (3). 4. Separate the air filter from the back panel (4). 5. Vacuum (5) the air filter to remove the dust and dirt. 6. Insert the air filter in the back panel. 7. Insert the back panel and secure with screws (2). Figure 6-1. Removing Air Filter Door EPS-53A AUX SVHS / AUDIO IN VIDEO 1 / AUDIO IN VIDEO 2 / AUDIO IN MONITOR RS232 PC / RGB 2 PC / RGB 1 AUDIO IN AUDIO OUT O I 5 2 1 3 2 4 6 THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

 3M IPC 2000 ENGLISH 6-2. Replacing Projection Lamp The NTP lamp of the projector has a limited lifetime of approximately 1500 hours. If the projected image appears dark or a red lamp life indicator bar displays during projector startup, you should change the lamp and air filter. !!! ! Important Note This lamp contains mercury. Consult your local hazardous waste regulations and dispose of this lamp in a proper manner. ! Caution Always unplug the projector when changing the lamp. There are high voltage parts inside the cabinet that may cause electric shock. ! Caution Allow the projector to cool down for 30 minutes. Lamp and adjacent metal parts become extremely hot and can cause burns to your fingers. 1. Press the Standby/On button on the operator touch panel or remote control. Wait for the fan motor to cycle off. 2. Turn the main power switch to OFF and unplug the projector power cord. 3. Set the projector on a sturdy surface with the front of the projector facing you. 4. Press and hold the lamp door button (1) with your index finger. Slide your finger to the right and depress the lock tab (2). Pull outward on the lamp door (4) to hinge it to the right side and access the lamp cartridge (5). 5. Unscrew two retaining screws (3) securing the lamp cartridge (5). 6. Grasp handle (6) and carefully pull the lamp cartridge (5) out of the projector. 7. Carefully insert the new lamp cartridge (5) and secure with retaining screws (3). 8. Close the lamp door (4) tightly until the lock tab (2) slides into the locked position. 9. Go to the Advanced Setup menu and reset the lamp life display to zero. (see 6-3. Lamp Life Indicator) Figure 6-2. Changing the lamp cartridge 1 5 6 4 2 3 EPS-43A THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

3M Multimedia Projector MP8760 19 ENGLISH 6-3. Lamp Life Indicator The elapsed operating time of the lamp is displayed on the Info sub-menu. From the Main menu, select INFO to display the lamp life. As long as the lamp indicator bar is green, the lamp is good. When the bar changes to red, the lamp should be changed. After changing the projection lamp, the lamp life indicator must be reset to zero. To reset the lamp life indicator: 1. Press the Menu button to display the main menu. 2. Select the Advanced Setup sub-menu using the Disc Pad. 3. Select Reset lamp display and press the Enter button. 4. The following message will display: “Really reset lamp life display? OK! / Cancel” 5. Using the Disc Pad, select OK! and press Enter to acknowledge the change. 6. Press Menu to exit the menu system. !!! ! Note To view the used/remaining lamp life: (1) Go to the Main Menu. (2) Select “Info”. (3) Press the Enter button. 6-4. Cleaning the Projector For best performance, keep your projector free of excess dust and surface dirt. Use a soft cloth to remove dust from the projector housing. Use 3M High Performance Cleaning Cloth to remove surface dirt and smudges from the projection lens. ! Caution Always unplug the projector when cleaning. Take care that no liquids get inside the projector. There are high voltage parts inside the cabinet that may cause electric shock. Figure 6-3. High Performance Cleaning Cloth THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

 3M IPC 2000 ENGLISH Section 7: Troubleshooting 7-1. Troubleshooting Problems and Solutions Problem Probable Cause Possible Solution Projector will not turn on. • Power cable is disconnected or not plugged in. • Main power switch is not on. • The ?inner fuses? are open? • Plug the power cable into an AC outlet. • Turn the main power switch to the ON postion. • Send the unit to be repaired. Image is disturbed or unstable. • Wrong Sync setting. • Wrong Tracking value. • Set to factory default setting. (See below!) • Change Sync setting in the Picture menu for optimum performance • For vertical interference stripes, change the Tracking in the Picture menu for optimum performance. No computer image projected. Message “Looking for signal ...” displays. • Loose cable. • No power to computer. • Wrong synchro- nization mode. • Check and secure cable connections. • Turn on computer. • Adjust synchronization mode of the projector to the synchro- nization mode of the computer via Advanced Setup menu. No video image projected. • Loose cable. • No signal from video source. • Check and secure cable connections. • Check video picture on TV. No video images are projected or the video image ?does something? and turns off. • The video source is sending a video signal and the projector cannot automatically select the video standard in use. • In the submenu Video Standard? in the Advanced Setup menu, manually change the video standard from Automatic to the type of standard in use. Mouse does not work. • Loose cable. • Wrong connection. • Wrong power up sequence. • Check and secure cable connections. • For PS/2 and ADB (Apple) mouse a special adapter is necessary. Only use adapters from the original manufacturer (Section 8-2). • The mouse emulation operates correctly only if the correct power up sequence has been used (refer to section 3-5.) To verify that the projector is programmed for the desired mouse emulation mode, go to the Screen Parameters? In the Advanced Setup/Test submenu. Check that the parameter MTPE presents the desired mouse mode. This is not a selection, but a ???? that shows the type of mouse emulation with which the projector is programmed to communicate. The lamp turns off, the Standby button and LED lights up and stays green as the fan cools the unit, and the unit goes into Standby Mode. • The air intake or exhaust vents are blocked. • The air filter is dirty. • Clear all obstructions from the air intake and exhaust vents. • Clean or replace the filter. The lamp turns off, the unit goes into Standby Mode, and the fan ????s more rapidly. • The air intake or exhaust vents are blocked. • The air filter is dirty. • Clear all obstructions from the air intake and exhaust vents. • Clean or replace the filter. Note: It is necessary to turn the projector off and on with the main power switch before restarting the projector. The lamp turns off, the Standby button blinks red for a few seconds, and the unit goes into Standby Mode. • The air intake or exhaust vents are blocked. • The air filter is dirty. • Clear all obstructions from the air intake and exhaust vents. • Clean or replace the filter. THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

3M Multimedia Projector MP8760 21 ENGLISH The Standby button blinks red and the lamp with not turn on. • There is no lamp in the unit. • The lamp is improperly placed in the unit. • Put a 3M MP8760 lamp in the unit. • Install the lamp again. A question mark appears in the lower left of the screen when connecting to computer video. • The horizontal and vertical synchronization signals from the computer video are not correctly polarized according to VESA video standards. • The computer video signal is not a VESA or Mac standard. • Select Mode in the Image menu, select the correct video mode, and press Enter. Image off-center. • Image position. • Center image with the Disc Pad of the control panel or on the remote control transmitter. Cannot get entire image on the screen. • Wrong Tracking value. • Compatibility problem. • If vertical interference stripes occur, change the Tracking value in the Picture menu for optimum performance. • Refer to the documentation for your graphic card. Change the Resolution setting in the Picture menu to the resolution of the video mode output from the computer graphic card. Washed out image. • Wrong Contrast setting. • Wrong Brightness setting. • Change Contrast setting in the Picture menu. The bar should be in the middle position. • Lower Brightness setting in the Picture menu. Choosing Brightness and pressing Enter can perform an automatic adjustment. Humming noise. Slowly passing horizontal bars. • Signal sources are connected to different power sources. • VCR connected to aerial system and to projector. • Bad signal. • Locate the source of disturbance. Disconnect the sources one after another from the projector. Connect all sources to a common power source. • Remove antenna connection from VCR. If the disturbance disappears, use a by-pass filter (isolating transformer) to connect the antenna to the VCR. • Try different input source. Image is disturbed or unstable. • Wrong Sync setting. • Wrong Tracking value. • Set to factory default setting. (See below!) • Change Sync setting in the Picture menu for optimum performance • For vertical interference stripes, change the Tracking in the Picture menu for optimum performance. No computer image projected. Message “Looking for signal ...” displays. • Loose cable. • No power to computer. • Wrong synchro- nization mode. • Check and secure cable connections. • Turn on computer. • Adjust synchronization mode of the projector to the synchro- nization mode of the computer via Advanced Setup menu. No video image projected. • Loose cable. • No signal from video source. • Check and secure cable connections. • Check video picture on TV. Mouse does not work. • Loose cable. • Wrong connection. • Wrong power up sequence. • Check and secure cable connections. • For PS/2 and ADB (Apple) mouse a special adapter is necessary. Only use adapters from the original manufacturer (Section 8-2). • The mouse emulation operates correctly only if the correct power up sequence has been used (refer to section 3-5.) Image off-center. • Image position. • Center image with the Disc Pad of the control panel or on the remote control transmitter. Cannot get entire image on the screen. • Wrong Tracking value. • Compatibility problem. • If vertical interference stripes occur, change the Tracking value in the Picture menu for optimum performance. • Refer to the documentation for your graphic card. Change the Resolution setting in the Picture menu to the resolution of the video mode output from the computer graphic card. Washed out image. • Wrong Contrast setting. • Wrong Brightness setting. • Change Contrast setting in the Picture menu. The bar should be in the middle position. • Lower Brightness setting in the Picture menu. Choosing Brightness and pressing Enter can perform an automatic adjustment. THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

 3M IPC 2000 ENGLISH Humming noise. Slowly passing horizontal bars. • Signal sources are connected to different power sources. • VCR connected to aerial system and to projector. • Bad signal. • Locate the source of disturbance. Disconnect the sources one after another from the projector. Connect all sources to a common power source. • Remove antenna connection from VCR. If the disturbance disappears, use a by-pass filter (isolating transformer) to connect the antenna to the VCR. • Try different input source. !!! ! Note The factory default settings of the projector can be restored by pressing Enter and Mute simultaneously on the control panel when switching on the main power switch of the projector and pressing the Standby button afterwards. The projector will start immediately and the message “Parameter factory settings restored” displayed in the starting screen will indicate the default settings are reset. 7-2. Service Information For product information, product assistance, service information, or to order accessories or spare parts, please call: In U.S. or Canada: 1-800-328-1371 In other locations, contact your local 3M Sales office. THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

3M Multimedia Projector MP8760 23 ENGLISH Section 8: Product Specifications 8-1. Technical Specifications Display Technology Single DMD Resolution 1,024 x 768 (total 2,359,296 pixels) 625 (PAL) / 525 (NTSC) video lines to full screen size magnification Colors 16,770,000 colors Zoom / Focus / Height shift Power control Projection Lens Throw Ratio=1.44 – 2.59 / f=25 - 45 mm Power Zoom / Power Focus, 0° - 12° Power Height Shift Picture Size 1.0 - 8.7 m (38 - 340 in.) diagonal, 2.6 m diagonal at 3.0 m distance and f=25 mm Projection Lamp 350 W DC NTP lamp PC Compatibility Resolution 640 x 400 & 800 x 600 (magnified), 1024 x 768 (native) and 1280 x 1024 (compressed) (sync on green is available) Video Compatibility NTSC / NTSC 4.43 / PAL (including PAL-M, N) / SECAM, PAL-60 Input Terminals PC/RGB: RGB x 2 (D-Sub 15-pin) PC/RGB: PC-Audio x 2 (3.5 mm stereo mini jack) Video: RCA x 2 + SVHS x 1 + Camera/Aux x 1 Video: Audio x 3 (2 x RCA left/right) Output Terminals RGB-Monitor: RGB x 1 (D-Sub 15-pin) Audio: Audio x 1 (2 x RCA left/right) Communication Terminals RS-232C (D-Sub 9-pin) Scanning Rates Hor.: 15-86 kHz, Vert.: 50-160 Hz Audio Speakers 20 Watts, stereo surround sound Height Adjuster Front leg (additional 0°... 9°, variable) Unique Features Digital magnification, Wireless infrared remote control Remote Control Transmitter Projector control, PC/MAC mouse cursor control Dimension (WxHxD) 331 x 137 x 272 mm Power Requirements AC 100-240 V ±50/60 Hz Power Consumption 450 W Regulatory Approvals FCC Part 15, Class A, CE, UL Warranty Two years limited warranty on parts and labor THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

 3M IPC 2000 ENGLISH 8-2. Accessory & Spare Parts List Part Description Part Number Projection Lamp Kit - NTP Lamp (350W) - Air Filter 78-6969-9048-6 Air Filter (included in lamp kit 78-6969-9048-6) 78-8118-3476-7 Power Cords (U.S., UK, Europe) For special power cords. See Appendix D-3 DY-0205-1356-9 (U.S.) DY-0205-1355-1 (UK) DY-0205-1354-4 (Europe) VGA Cable (15-15 pin male/male) DY-0205-1271-0 Video Cable (S-Video Mini-DIN-4pin) DY-0205-1010-2 Composite Video Cable (RCA to RCA) DY-0205-1008-6 Audio Cable (RCA to 3.5 mm stereo) DY-0205-1359-3 PC Serial Cable (PC mouse connection) DY-0205-1007-8 Remote Control 78-8118-3475-9 Mac Cable Set (optional) DY-0205-1361-9 Carry Case (optional) 78-6969-8587-4 Shipping Case (optional) 78-6969-8588-2 Mouse Y-Cable (optional) DY-0205-1507-7 Extension Cable Kit (optional) XX-0034-1714-2 PC-Audio Cable (3.5 mm stereo to 3.5 mm stereo) (optional) 26-1012-0683-2 Ceiling Mount Kit (optional) 78-6969-8591-6 Mac Cable Set (optional), Part number DY-0205-1361-9: This kit contains a Mac mouse adapter and a Mac video cable. Extension Cable Kit (optional), Part number XX-0034-1714-2: The extension cable kit includes a video amplifier and 20 m (65 ft.) video cable. The kit increases the allowable distance between the projector and the video source without burdening the video source. Mouse Y-Cable (optional), Part number DY-0205-1507-7: This cable provides user with the option to simultaneously operate the MP8760 remote mouse and a PC mouse (only works with Microsoft serial mouse). 8-3. How to Order Please order these parts through your dealer, or contact 3M Customer Service at the following number: • In U.S. or Canada: 1–800–328–1371 • In other locations, contact your local 3M Sales office. THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

3M Multimedia Projector MP8760 25 ENGLISH Appendix A-1. Optional Lenses Charts Note: The zoom function is not available when optional lenses are installed. Short Throw Lens: H X D f=20 mm Distance D m (ft.) Width W m (in.) Height H m (in.) Shift X m (in.) 1.0 (3.28) 0.93 (36.6) 0.70 (27.6) 0.11 (4.3) 1.5 (4.92) 1.37 (53.9) 1.03 (40.6) 0.16 (6.3) 2.0 (6.56) 1.81 (71.3) 1.36 (53.5) 0.21 (8.3) 3.0 (9.84) 2.69 (105.9) 2.02 (79.5) 0.31 (12.2) 4.0 (13.12) 3.57 (140.6) 2.67 (105.1) 0.41 (16.1) Long Throw Lens: H X D f=88 mm Distance D m (ft.) Width W m (in.) Height H m (in.) Shift X m (in.) 4.0 (13.12) 0.80 (31.5) 0.60 (23.6) 0.23 (9.1) 5.0 (16.40) 1.00 (39.4) 0.75 (29.5) 0.29 (11.4) 6.0 (19.69) 1.20 (47.2) 0.90 (35.4) 0.35 (13.8) 7.0 (22.97) 1.40 (55.1) 1.05 (41.3) 0.40 (15.7) 8.0 (26.25) 1.60 (63.0) 1.20 (47.2) 0.46 (18.1) 9.0 (29.53) 1.80 (70.9) 1.35 (53.2) 0.52 (20.5) 10.0 (32.81) 2.00 (78.7) 1.50 (29.1) 0.57 (22.4) THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

 3M IPC 2000 ENGLISH A-2. Power Cord Sets A standard power cord set (U.S., UK, or European) will be included with each MP8760. If you need a special power cord set, contact your local 3M authorized dealer. The power cords must be in accordance with the regional and corresponding national safety regulations and be properly approved. Examples of these power cords are shown below. North America UL Listed CSA Certified 15A 125VAC Germany, Netherlands, Spain, France, Greece VDE Certified 10A 250VAC Great Britain AUSTA Certified 13A 250VAC Italy IMQ or BASEC Certified 10A 250VAC Switzerland SEV Certified 10A 250VAC Australian SAA Certified 10A 250VAC Denmark Complies with Danish Standard 6/10A 250VAC THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

3M Multimedia Projector MP8760 27 ENGLISH A-3. Changing Of The IR-Remote-Control Address Changing of the IR-Remote-Control address: You can choose one out of four different IR-RC addresses for the projector, so you can control four projectors separately without any interferencies to another projector. To change an address from the standard address #1, go to the Advanced Setup menu and choose an address of your choice under the menu item RC Address (1...4). Confirm your selection with the Enter button. After this point you can't control the projector with the IR-RC transmitter anymore until you change the transmitter address to the same address. (Of course, you still can enter the menu system and change back the address with the Control Panel of the projector!) To change the address of the IR-RC transmitter, please press the Mode button and an address number (buttons 1,2,3 or 4) simultaneously for 4 seconds on the IR-RC transmitter. After this you should be able to control the projector by IR-RC again if you've choosen the same address for the projector and the IR-RC transmitter. A-4. Resetting The Projector To Factory Default Settings The factory default settings of the projector can be restored by pressing Enter and Mute simultaneously on the control panel when switching on the main power switch of the projector and pressing the Standby button afterwards. The projector will start immediately and the message “Parameter factory settings restored” displayed in the starting screen will indicate the default settings are reset. If you've had selected another menu language as english, which is the default language, you'll have to select your menu language again. THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

 3M IPC 2000 ENGLISH A-5. Supported Data Modes and Resolutions Table of the predefined Data modes: Data Mode Name Resolution Hor. x Vert. Horizontal Frequency kHz Vertical Frequency Hz Pixel- Clock MHz VGA 640 x 350 640 x 350 30,000 70,000 25 VESA 640 x 350 85Hz 640 x 350 37,861 85,081 32 VGA Text 720 x 350 720 x 350 31,469 70,087 28 VGA 640 x 400 640 x 400 25,560 60,000 25 VESA 640 x 400 85Hz 640 x 400 37,861 85,081 32 VGA Text 720 x 400 720 x 400 31,469 70,087 28 VGA 640 x 480 640 x 480 31,469 59,941 25 VESA 640 x 480 72Hz 640 x 480 37,861 72,810 32 VESA 640 x 480 75Hz 640 x 480 37,500 75,000 32 VESA 640 x 480 85Hz 640 x 480 43,269 85,008 36 VESA 800 x 600 56Hz 800 x 600 35,156 56,250 36 VESA 800 x 600 60Hz 800 x 600 37,879 60,317 40 VESA 800 x 600 72Hz 800 x 600 48,077 72,188 50 VESA 800 x 600 75Hz 800 x 600 46,875 75,000 50 VESA 800 x 600 85Hz 800 x 600 53,674 85,062 56 VESA 1024 x 768 43Hz 1024 x 768 35,522 86,957 45 VESA 1024 x 768 60Hz 1024 x 768 48,363 60,004 65 VESA 1024 x 768 70Hz 1024 x 768 56,476 70,069 75 VESA 1024 x 768 75Hz 1024 x 768 60,023 75,029 79 VESA 1024 x 768 85Hz 1024 x 768 68,677 84,996 95 VESA 1152 x 864 75Hz 1152 x 864 67,500 75,000 108 VESA 1280 x 960 60Hz 1280 x 960 60,000 60,000 108 VESA 1280 x 1024 60Hz 1280 x 1024 63,981 60,020 108 VESA 1280 x 1024 75Hz 1280 x 1024 79,975 75,024 136 Mac 640 x 480 640 x 480 35,000 66,667 30 Mac LC 640 x 480 640 x 480 34,975 66,619 31 Quadra 832 x 624 832 x 624 49,107 75,087 57 Mac 1024 x 768 1024 x 768 60,241 74,927 80 Mac 1152 x 870 1152 x 870 68,681 75,062 100 Mac 1280 x 960 1280 x 960 85,938 85,003 139 Sun 1152 x 900 66Hz 1152 x 900 61,846 66,004 95 Sun 1152 x 900 76Hz 1152 x 900 71,713 76,047 105 Table of predefined Resolutions for User-Mode 1...3: Predefined Resolutions 640 x 350 720 x 350 640 x 400 720 x 400 640 x 480 800 x 600 832 x 624 1024 x 768 1152 x 864 1152 x 870 1152 x 900 1280 x 960 1280 x 1024 THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

3M Multimedia Projector MP8760 29 ENGLISH THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly set forth in a written agreement signed by an authorized officer of 3M. Warranty and Limited Remedy. This product will be free from defects in material and manufacture for a period of two years from the date of purchase. The projection lamps are considered consumable items and are warrantied for 90 days or 180 hours of operation, whichever occurs first. 3M MAKES NO OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Limitation of Liability. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Let us help you make the most of your next presentation. We offer everything from presentation supplies to tips for better meetings. And we're the only transparency manufacturer that offers a recycling program for your used transparencies. For late-breaking news, handy reference and free product samples, call us toll-free in the continental United States and Canada, 24 hours a day, or visit our Internet Website. 3M Austin Center Building A145-5N-01 6801 River Place Blvd. Austin, TX 78726-9000 3M Canada P.O. Box 5757 London, Ontario N6A 4T1 3M Mexico, S.A. de C.V. Apartado Postal 14-139 Mexico, D.F. 07000 Mexico 3M Europe Boulevard de l’Oise 95006 Cerge Pontoise Cedex France Litho in USA Copyright ' 2000 3M IPC. All Rights Reserved 78-6970-9022-9 Rev. A THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

M This user manual is provided as a free service by FixYourDLP.com. FixYourDLP is in no way responsible for the content of this manual, nor do we guarantee its accuracy. FixYourDLP does not make any claim of copyright and all copyrights remain the property of their respective owners. About FixYourDLP.com FixYourDLP.com (http://www.fxyourdlp.com) is the World’s #1 resource for media product news, reviews, do-it-yourself guides, and manuals. Informational Blog: http://www.fxyourdlp.com Video Guides: http://www.fxyourdlp.com/guides User Forums: http://www.fxyourdlp.com/forum FixYourDLP’s Fight Against Counterfeit Lamps: http://www.fxyourdlp.com/counterfeits RecycleYourLamp.org – Free lamp recycling services for used lamps: http://www.recycleyourlamp.org Lamp Research - The trusted 3rd party lamp research company: http://www.lampresearch.com Discount-Merchant.com – The worlds largest lamp distributor: http://www.discount-merchant.com Sponsors: Sponsors: Disclaimer Disclaimer