Skywalker STRC712G Assembly
Text of the manual
• Need phillips screw driver (included with trampoline) and 2 adjustable wrenches (for putting the trampoline together). A rubber
mallet is also recommended to make assembly easier.
• Assembly requires two adults. Keep children away from the trampoline and enclosure until they are completely put together.
• Use gloves to protect your
2, Attach the unit A and Middle tube(7B) together as shown
Repeat this process until two Leg extension will be completed
4, Attach the unit A and Middle tube(7A) together as shown
Repeat this process until two Right Leg extension will be completed
7(B)
A
7(A)
7(B)
7(A)
7(A)
7(B)
3
4
5
2
5,Stand two leg sections and hold them in the positions
shown. Slide th
Notice: tighten all the Nuts
6
7
15
7, Attach two springs(10) to the each corner of the mat(9) and corner of
the frame, There will be a total of 8 springs attahced.
Continue to attach the remaining springs until all Springs
are attached.
Note:The spring has a large hook which attaches to the
frame and a small hook which attaches to the mat V-ring.
Attach
8. Lay one of the frame Pad (11) on the frame.
Adjust the position of the Frame Pad so that the slits are
directly above the Socket
16
Safety Note: Do not use the trampoline without the Frame Pad.
Frame Pad is designed to reduce the possibility of injuries due to
jumpers coming in contact with the trampoline frame. If
you do not have a Frame Pad, contact yo
1. Lay one Straight Tube (5) with foam and one Curved
Tube (6) with foam (8) on the ground, insert the Straight
Tube(5) into the curved tube(6), secure with the screw(4).
Repeat this step to attach the seven remaining Straight
Tubes(5) and Curved tubes(6) together (not shown).
2，Inspect the attachments of the enclosure Netting to the
trampoline mat (bed).
