widmer E-3 Adjustment Instructions Manual
Text of the manual
MODEL 776-E EMBOSSER/IMPRINTER
The Model 776-E is a hybrid between an electric seal embossing machine (raised imprinting on
document) and a validation stamp (Text, signature and sometimes date, number or time &date printed
through a single or multi-colored ribbon).
If your unit is equipped with date / or date and time.
TO ADJUST THE PRINTING PRESSURE - THROUGH THE RIBBON
- CAUTION -
ALWAYS UNPLUG THE UNIT FIRST.
Note: Imprint pressure is pre-set at
the factory. However, if a further
adjustment is needed, turn the
machine upside down and unscrew
the 4 rubber feet. Remove the
bottom aluminum cover, taking note
as to which way the double dimples
in the cover are facing. W
TO SET THE DATE:
Insert case key in lock and rotate key
towards you. Lift up the top of the machine and
set the wheels by using a wooden stylus or pencil
to rotate the wheels in a downward direction;
setting each wheel to the month, date and year.
Note: Date units must be set on a daily basis.
TO SET THE NUMBER:
Proceed as above To open the lid –
rotate t
