Zte MF10 Quick Setup Manual

Interface Description................................................................................................. 4 Installation...................................................................................................................... 5 Inserting the (U)SIM Card........................................................................................ 5 Inserting the modem.................................................................................................. 5 Connecting computer................................................................................................ 6 Connecting the external power................................................................................. 6 Switching on your device.......................................................................................... 7 Power supply.................................................................................................................. 7 Notes on Service and Coverage.................................................................................... 7 Internet Access................................................................................................................... 7 Preparation ..................................................................................................................... 7 Settings ........................................................................................................................... 8 Login .......................................................................................................................... 8 Quick setup ................................................................................................................ 9 3G Settings............................................................................................................... 12 WAN Connection.................................................................................................... 13 Disconnecting from the Internet................................................................................. 13

service on 2G and 3G network, user can simply connect computers to MF10 via Ethernet or WLAN interface to get high-speed internet connectivity, The USB modem stick on MF10 via a USB 2.0 Master high speed port can support multi-mode 3G bands, such as HSPA/UMTS/EDGE/GPRS/GSM, MF10 comply with 802.11b/g standard with Wi-Fi security. Size:93 × 70 × 25mm Weight:83g Tri-bands HSUPA/HSDPA/UMTS(850/1800/2100MHz) Four bands EDGE/GPRS/GSM(850/900/1800/1900MHz) One USB 2.0 Master high speed port Two RJ45 Ethernet ports IEEE 802.11b/g WLAN access point(supporting WEP/WPA/WPA2 security) Server and DNS proxy WEB based interface for local management 1. POWER ON External power supply works normally. OFF External power supply is disconnected or power off. 2. WLAN ON WLAN works normally. Blinking Data transmission OFF WLAN works abnormally. 3. PPP ON Internet connected Blinking The router attempts to connect Internet. Indicator State Description

• ? The (U)SIM card has not been installed. • ? The PIN code or PUK code is required. • ? The router can not work normally. WPS LAN 1 LAN 2 POWER Socket POWER Switch OFF Internet disconnected and not attempt to connect. 4. WPS ON WPS authentication is started and available. Blinking WPS authentication is in progress or unavailable. OFF WPS authentication is not started. 5 LAN Off Out of Connection Solid Green Connection Flashing Green Data Service Process 1. : WPS button is used to start Wi-Fi Protected Setup authentication process. 2. : Ethernet connections to computer. 3. : Ethernet connections to computer. 4. : Connection to the external power supply. 5. : Turn the router ON or OFF. Hold on for several seconds to restore the factory default settings. 、 Interface Description

Inserting the modem Insert the (U)SIM card into the modem(supplied by ZTE). 1. Take down the modem cap, and then the USB connector is visible. 2. Pull out the plastic socket above the USB connector out. 3. Insert the (U)SIM card into the socket, and make sure that metal contact area facing to the modem. 4. Insert the plastic socket into the modem. You can hear a click when the (U)SIM card socket locks into place. Insert the modem into the router. 1. Rotate the front cover. Notes: Do not pull the (U)SIM socket rudely for the socket is fixed with the modem. Otherwise the socket will get damaged.

Connect your computer to the LAN interface using the Ethernet cable (RJ45) or to the WLAN Wireless interface. 1. Connect the external power adaptor to a standard power outlet. 2. Insert the plug into the socket at the rear of the router. Warning: Please power off the router and remove the external power adapter before removing or inserting the modem, if not, the router or modem may be damaged. Notes: The router will adapt the Ethernet cable style (crossover or straight) automatically. Connecting computer Connecting the external power

Power supply Notes on Service and Coverage Preparation 1. Turn the power switch on to get started. 2. Wait 1~2 minutes after turning the router on before you use the service. The power indicator should be lit on. For normal operation connect the router to the external power adapter. In case of power failure or when there is no available external power supply, the router can not work. If you cannot get service, make sure that: • You are in an area which has sufficient network coverage. • You are using the correct (U)SIM card. • If necessary you need enter your PIN or PUK code. • Please wait 1-2 minutes for the modem to initialize, attach to the network and obtain an IP address. The router does not require any drivers, and it supports all operating systems with Ethernet LAN capability, such as Windows 2000, XP, Vista, MAC OS X and Linux. The router supports two computers surfing on internet using Ethernet cables at the same time, and also supports Wireless LAN connection. Before using the data service, make sure: • The (U)SIM card is installed into the modem. • The modem is inserted into the router. • The Ethernet cable is connected properly. • The power light is on. • The PPP light is on. It is suggested that you use one of these web browsers to connect to the internet. Internet Access Web browser requirement:

• Firefox 2.0 • Netscape version 9.0 Do not change any settings unless instructed by your service provider. To make changes to your settings you need to disconnect the router from the network. After making changes reboot your router by turn off and on again. The router can be connected by RJ45 or by Wi-Fi (the SSID is “ZTE Wireless Network”). By either connection mode, you should set to obtain an IP address automatically in the attribution setting of Internet protocol (TCP/IP). After your computer gets the IP address (like 192.168.0.101) from the router, open a web browser and type “http://192.168.0.1” in the address bar, and then input the username and password to log in. : : Click to log in the router. Check to let the Explorer keep the user name and password. When you successfully login, the router status web page appears: Settings Login User Name admin Password admin Login Save

the related areas. • : Show configuration list for your router. • : Show the detail configuration. Click , you can set up your gateway in the safe way. Click button to show following figure: Click button Index area Content area Quick Setup Next Next Quick setup

Profile Selection Profile Name APN Setting Manual APN Auto APN APN Dial No PDP Type IP PPP PDP Setting Manual PDP Auto PDP DNS Auto DNS Manual DNS Authentication CHAP PAP User Name Password Add Select , the APN parameters are shown in the following figure: • : Select the profile which you want to use for the internet connection. • : The profile which is set as default. • : APN address mode. If a fixed APN is given by your service provider, select . Otherwise select the , and the router will automatically obtain this parameter. • : APN string. • .: This dial number is used for data service connection. • : (Default) or . • : PDP address mode. If a fixed IP address is given by your service provider, select . Otherwise select the and the router will automatically obtain this parameter. • : Select or . • : Select or . • : Set user name for this APN. • : Set password for this APN. To add a new APN profile: 1. Click to define a new APN profile.

3. Click to save this new profile. 4. Click to set this profile as default. Click , you can configure how to connect to the Internet. There are three connection modes: • : The router will automatically connect to WAN when it is powered on. • : The connection will be established when data transmission are required. • : Connect to Internet manually. Click to confirm your configuration, and then the PPP connection status will be shown in the figure. When you successfully login, you may set the detail configuration in Content area of the router status web page. You can configure Router, Wi-Fi Settings, Firewall, Advanced separately, please refer to the User Manual one by one. 1. Select from page, if you want to terminate your Internet connection. 2. Click to confirm. Save Set default WAN Connection Auto Connect On Demand Connect Manual Connect Apply Disconnect Internet WAN Connection Apply Tips: Turn off the router can also terminate Internet connection. WAN Connection Detail configuration Disconnecting from the Internet