Vision PR001 Operation & User’s Manual

cause a flood or malfunction and may damage the device used in this housing. - When storing and transporting the housing, protect it with a soft pouch or something that won’t scratch or damage the housing. - When used, the o-ring must be absolutely clean and free of sand, hairs or any other particule. - Sealing surface must also be cleaned before being used. - Rinse the housing in fresh water after each use. Clean the buttons area and then wipe the whole system before removing the cap. - Replacing the o-rings should be done once a year to assure best sealing and waterproofness. - Avoid scratching the main window and the camera lenses acrylic parts. - To remove an o-ring, use a non-sharp plastic tool that won’t break it. - Only use replacement parts provided by OVISION or by one of its authorized dealer.

1. Locking security latches 2. Main window 3. Push button 4. Push button 5. Push button 6. Push button 7. Camera window 8. Cap

Before placing your iPhone into the OVISION housing, follow these instructions. 1. Press and hold pressure with your finger on the iPhone’s camera application. After doing that, the multiple applications will become shaky and with and x on the top left corner. 2. Place your finger on the iPhone’s camera application and slide it to the bottom left or right corner of the iPhone’s screen by holding pressure. Figure 1 Figure 2

to ON. It will prevent the iPhone from running out of battery quickly. 4. In Settings – General, set the Auto-Lock function to Never. Figure 3 Figure 4

Before installing your iPhone into the OVISION housing, make sure to read and understand these instructions. 1. Open both latches①. 2. Pull cap⑦ to open the housing. 3. Slide the iPhone into the housing and make sure the back is in contact with rubber bumpers into the housing. 4. Push back the cap⑦ to close the housing. 5. Close both latches①. 6. Wash main window② and camera window⑦ to have the best quality of filming possible

date of the consumer. This warranty covers any material or manufacturing defects. 2. The warranty does not cover the products housed in OVISION’s housings. Any problem or failure of the device while using OVISION products is not the responsibility of OVISION. 3. Parts that require maintenance or special care(ORINGS, windows) are not covered by the warranty. 4. OVISION doesn’t hold responsibility for any damage caused by an unauthorized (by OVISION) modification or improper use. 5. The warranty is only valuable if the product is bought by an authorized dealer of OVISION. 6. Unauthorized modifications or repairs (by OVISION) will automatically void the warranty.