Socket AC4088-1657 Operation & User’s Manual

Hanger Bolt Command Barcode label to place on mount 2 x Hex Nuts Charging Mount AC Adapter Use the plug that is regionally appropriate © 2017 Socket Mobile, Inc. All rights reserved. Socket, the Socket logo, and SocketScan are registered trademarks or trademarks of Socket Mobile, Inc. USA, and any use by Socket Mobile, Inc. is under license. All other trademarks and trade names contained herein may be those of their respective owners. or PACKAGE CONTENTS

Charging Pins LED* PRODUCT INFORMATION 3

B. Micro USB (2m) C. Cushion Crown D. Pem Cap / Camera Mount* E. 2 x Hex Nuts F. Hanger Bolt** A. B. D. E. F. C. *Optional for Camera Mount (See page 9) **Optional for table mount (see page 8) 1/4” - 20 Machine bolt thread Screws into wooden surface Tapered lag-screw Screws into camera mount or Charging Mount ASSEMBLY OVERVIEW 4

B. Insert Micro USB connector into port and fit usb cable into the cord keeper. C. Secure the cable to prevent from movement. A. B. C. HOW TO CONNECT USB CABLE 5

sure the charging pins on the Mount and the scanner make contact with each other and the red LED on the Mount is illuminated. “Beep Beep”* CHARGING MOUNT OPERATIONS 6

Mobile Mode - Normal (default)* Scanning this bar code will enable the scanner to enter mobile mode. It will always be in manual trigger mode even when placed in the mount or cradle. *Scanner Factory Reset returns to Mobile Mode. #FNB 41FBA50000# Auto Mode (Presentation Mode) Scanning this bar code will enable the scanner to enter auto mode. When the scanner is in auto mode, it will switch to presentation trigger mode when it detects power on the cradle pins. When the scanner is removed from the cradle it will remain in presentation trigger mode until the users presses the trigger. At that point it will switch to normal manual trig- ger mode. Auto Mode command barcode is also printed on the product label. #FNB 41FBA50003# COMMAND BARCODES 8

Action Behavior Notification Beep Pattern LED Activity Vibrate Place Scanner in the Mount Scanner switches to Presentation Mode High-high tone confirms proper seating* Battery Status LED is Disabled None Place a barcode in the Scanners Field of View Decode Bar Code 1 Beep when Data successfully scanned Green LED blinks (while scanning) None Auto Mode: Bar Codes placed in the Scanner’s field of view are automatically scanned. *Note: 7Qi/7Xi/D750 will beep High-high tone even if the Scanner is Power Off (to indicate charging) *Lights for D750 will function as described in the D750 user guide. AUTO MODE 9

Trigger button Scanner switches to Mobile Mode None Battery Status LED is Enabled Enabled Press the Trigger button Decode Bar Code 1 Beep when Data successfully scanned Green LED blinks (while scanning) Vibrate when Data successfully scanned Mobile Mode: Pressing the Trigger button initiates a scan. Mobile Mode (Not in the Mount) AUTO MODE 10

scanner in Auto Mode. The Scanner is not discoverable when in Auto Mode and in the Mount. This facilitates a fast connection to the current connected device when powered on (for example the start of the new business day). 2. The Trigger button must be pressed to disable Presentation Mode (and enable Mobile Mode) after the scanner is removed from the Mount. 3. The Scanner will not turn off when its in Presentation Mode and in the Mount under AC Power. 4. To avoid excessive power drain, the scanner should not be left out of the Mount in Auto Mode. Either press the Trigger button or Power off the scanner. AUTO MODE (CONTINUED) 11

wooden surface. Since the Pem Cap connects to a Camera Mount, popu- lar with IP Cameras, many OEM solutions are available which do not require the Hanger Bolt. If you plan to use the Hanger Bolt follow the special instructions for mounting on a wooden surface. If you have many Hanger Bolts to install, you may want to use a 1/4”-20 Hanger Bolt Driver with an Electric Screw Driver. (Image below) INSTRUCTIONS FOR MOUNTING ON WOODEN SURFACE 12 1/4 “

Special instructions for mounting on wooden surface: 1. Screw two Hex nuts (1/4”-20 thread, not included) onto the machine-threaded portion of the Hanger Bolt. 2. Use an open-ended wrench to lock the nuts against each other. 3. Drill a pilot hole into the surface you wish to place the Charging Mount. 4. Thread the lag portion of the Hanger Bolt into this surface as far as you can by hand. 5. Use a wrench on the outermost nut to drive the Hanger Bolt into the surface. 6. When the lag portion is sufficiently threaded, unjam the two nuts from each other, and run them off (unscrew them). INSTRUCTIONS FOR MOUNTING ON WOODEN SURFACE 13

your Camera Mount (1/4” - 20, 3/4” depth thread) and turn to the right. B. Attach the Charging Mount to the Pem cap. A. B. CONFIGURATION WHEN USING A CAMERA MOUNT 14

1.80 in (46 mm) Charging Mount Length 5.50 in (140 mm) Antimicrobial Rating JLS z2801:2000 Test: 2.49 on MRSA 6.07 when cleaned with SaniCloth Plus cloth wipes Biosafe HM4100, EPA#83019-1 CE MARKING AND EUROPEAN UNION COMPLIANCE The unit under test was found compliant with all the applicable Direc- tives, 2004/108/EC and 2006/95/EC. WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT The WEEE directive places an obligation on all EU-based manufactur- ers and importers to take-back electronic products at the end of their useful life. ROHS STATEMENT OF COMPLIANCE This product is compliant to Directive 2011/65/EU. NON-MODIFICATION STATEMENT Changes or modifications not expressly approved by the party responsible for compliance. RoHS PRODUCT SPECIFICATIONS COMPLIANCE STATEMENT 15