Tunstall Communicall Vision Quick Reference Card

Communicall Vision Quick Reference Card Command Key Sequences 1* Sound call tone. 0# End a call. 1# Switch on-site. 2# Switch off-site. 3# Switch momentarily off-site. 4# Check on-site/off-site status. 5# Get details of most recent call. 6# Get details of waiting call. 7# Open a door. 8# Increase speech module volume. 9# Decrease speech module volume. # Tone Switching - switch between listening and speaking. Alarm Functions Answering a call • Answer and listen. • Press * to speak to resident. • To hear alarm again press 5#. • Press 0# to clear connection. • Press 0# again to disconnect from Communicall. Calling a Speech Module • Call Communicall, then resident’s speech module. • Press ‘*’ key and speak. Copyright © Tunstall Group Ltd. 1999 Part Number: D9307001A0 UK Codes

900 Commands 952-959 Dialling to pre-set remote Schemes/Dispersed Alarms (tone switched). 974 Speak to Control Centre. 975 Switch to ’On-Site’. 976 Switch to ’Off-Site’. 978 Speak On/Off-Site Status. 988 Check for dial tone at TIC card (ability to go ‘off-site’). 900 800 Reset the system. Functions Using Communicall’s Telephone Exchange Calling Wardens & External Numbers Dial warden’s number (9 for an outside line). No alarm calls can be received during call. Transferring Calls Press the ‘R’ key and dial wardens Number. Once answered hang-up. Diverting Zones Press , then # followed by extension number to divert, press 1 and hang- up. To stop diversion enter …#0 . Programming Terminal • Must be plugged in at all times in a place where it will be heard. • Used for Communicall programming operations. Locking the phone • To lock press MENU and then *. • To unlock press MENU and *. Tel. 01977-661234 http://www.tunstall.co.uk/