tryten Nova Pro Assembly Instructions
Text of the manual
Open shipping box and remove base assembly.
•
Unlock the top slider using the set of keys from the hardware pack.
Remove the top slider from the OmniTab.
Loosen the 3 screws using the 1/8-inch hex L key from the hardware pack.
Pull sliders to the appropriate size tablet.
Tighten the three adjustment screws.
Slide the tablet into place.
Insert the Top slide
ASSEMBLY INSTRUCTIONS - continued
For Nova Go head assembly, follow instructions below.
First, remove the lower channel cover. Use an Allen key at the base of the channel cover to pry it
off of the pole.
In the basket hardware kit you will find 2 x ¼” screw and 2 x Z-nut. Insert screws into basket
bracket and thread on the T-nut but do not tighten. Make s
