Thermasol SignaTouch STCX Series Installation Manual

of the control. (The other end of the cable runs to the steam generator location.) NOTE: It is recommended to run the cable through electrical conduit. DO NOT STAPLE the cable! Connect the data cable to Power Distribution Module (PDM). (The other end of the cable runs to the back of the control in the shower location.) THERMASOL.COM I 800.776.0711 Read warnings on page 2. For illustrative purposes only. Consult with qualified professional for steam room construction details. 4 DO NOT pinch, nail, staple, wedge, or bind ...

2 THERMASOL.COM I 800.776.0711 Read warnings on page 2. For illustrative purposes only. Consult with qualified professional for steam room construction details. PLEASE REVIEW WARNINGS BELOW AND LEAVE THIS MANUAL WITH HOMEOWNER DO NOT USE THIS PRODUCT UNLESS YOU HAVE CONSULTED WITH YOUR DOCTOR AND RECEIVED WRITTEN PERMISSION TO DO SO. USE OF THIS PRODUCT MAY BE HAZARDOUS TO YOUR HEALTH. PLEASE CONSULT YOUR PHYSICIAN BEFORE USING. IF YOU ARE PREGNANT, ELDERLY, HAVE HIGH BLOOD PRESSURE, DIABETES, SUFFERING FROM HEART DISEASE, ARE INTOXICATED, OR NOT ...

6 THERMASOL.COM I 800.776.0711 6a Connecting SignaTouch to the Generator 6b Connecting SignaTouch to Serenity Light, Sound, Rainhead (if applicable) Read warnings on page 2. For illustrative purposes only. Consult with qualified professional for steam room construction details. M8 Cable M8 Cable M12 Cable 110v ...

7 THERMASOL.COM I 800.776.0711 6c Connecting SignaTouch to Digital Shower 6d Connecting Total Wellness Package Read warnings on page 2. For illustrative purposes only. Consult with qualified professional for steam room construction details. M8 Cable M8 Cable M12 Cable M12 Cable 110v 110v M8 Cable ...

PHONE: 800.776.0711 | FAX: 800.556.5257 | WWW.THERMASOL.COM 81220_NC ThermaSol uses the following open source project: Qt5-GUI Framework-www.qt.io-LGPLv3 ...

Insert steamhead into housing Use the supplied silicone to adhere the steamhead to the wall Turn ON the water supply to the generator. Check all the connections for leaks. Plug in generator (unless hardwired model). Turn ON the power source or breaker. Verify control panel lights up and test operation. Note: Initial power-on phase takes several minutes for generator to heat up steam. Please direct the home owner to visit www.thermasol.com/solution and click on the “I’m the home owner” button to learn about set-up and programing (in order to set up ...

of the control. (The other end of the cable runs to the steam generator location.) NOTE: It is recommended to run the cable through electrical conduit. DO NOT STAPLE the cable! Connect the data cable to Power Distribution Module (PDM). (The other end of the cable runs to the back of the control in the shower location.) THERMASOL.COM I 800.776.0711 Read warnings on page 2. For illustrative purposes only. Consult with qualified professional for steam room construction details. 4 DO NOT pinch, nail, staple, wedge, or bind ...

6 THERMASOL.COM I 800.776.0711 6a Connecting SignaTouch to the Generator 6b Connecting SignaTouch to Serenity Light, Sound, Rainhead (if applicable) Read warnings on page 2. For illustrative purposes only. Consult with qualified professional for steam room construction details. M8 Cable M8 Cable M12 Cable 110v ...