Tern Perch Bicycle Wall Mount Manual
Read Online
Read the Tern Perch Bicycle Wall Mount Manual online using the built-in PDF viewer.
Text of the manual
32 cm (12.6 in)
MAX: 640 mm
Max Weight:
18 kg (40 lbs)
Tern Perch™ Bicycle Wall Mount
Included in the package
1. Perch Bicycle Wall Mount
2. 3x Wood Mounting Bolts with Washers
3. 3x Cement / Masonry Inserts
with Bolts and Washers
Tools Required (not supplied)
Wood Framed Walls:
1. Drill
2. 4 mm Bit
3. 11 mm Wrench
4. Pencil
5. Level
Cement / Masonry Walls:
1. Drill
2. 11 mm Masonry Bit
3. 10 mm Wrench
4. Hammer
5. Pencil
6. Level
ternbicycles.com
1. Insert bike into Perch chain-side out, rotated
slightly counterclockwise (rear wheel down).
2. Straighten bike to secure into mount.
Specification
Usage
1.
2.
3.
1. Mark points to drill. Points should align vertically.
2. Drill holes.
Important Note: Hole diameter and depth differ for
wood and cement / masonry.
Wood:
Diameter 4 mm (5/32 in); depth 45 mm (1-3/4 in)
Cement / Masonry:
Diameter 11 mm (7/16 in); depth 36 mm (1-1/2 in)
3. For Cement / Masonry, drive in cement inserts.
WARNING: When installing on wood frame walls, mount to a wall stud. Mounting to drywall
or a hollow wall may result in damage or injury and is not recommended.
4. Fix middle and bottom bolts.
Tighten enough to hold bike.
5. Fit bike into Perch and adjust
angle so bike is horizontal.
6. Add top bolt. Tighten all bolts.
Installation
LIMITED PRODUCT WARRANTY INFORMATION: This Product comes with a ONE (1) YEAR Limited Warranty from the date of retail purchase by the original end-user. If a material or workmanship
defect arises and a valid claim is received within the Warranty Period, this wall mount will be replaced. Mobility Holdings cannot be held liable for damages to personal property due to misuse
or improper care and maintenance. This Product Warranty does not, under any circumstance, cover the replacement or cost of any third party product used with or connected to the Product.
Wood / Wall Stud
Cement / Masonry
Diameter: 4 mm (5/32 in)
Depth:
45 mm (1-3/4 in)
Diameter: 11 mm (7/16 in)
Depth:
36 mm (1-1/2 in)
11 mm
10 mm
Tern, the Tern Werd (logotype), and the Tern Berd (device) and Tern Perch, used alone or in combination
are trade names, trade devices or registered trademarks of Mobility Holdings, Ltd.
© 2014, Mobility Holdings, Ltd.