Banner Registration Mark Sensor R58 Expert Brochure

combination of 3 LED colours and 16 levels of grey scale analysis • Ultra-fast response time of 50 µs (10 kHz switching frequency) allowing precise detection and positioning • Extreme performance stability resulting from advanced micro- processor algorithms and virtually no temperature drift or warm up effect • Configuration using TEACH button to teach Static, Dynamic or Manual Adjustment; optional via remote wire • Indicator LEDs to show status, DO or LO and provide 30 ms ON-delay selection • 8-Segment bar graph for setup and signal strength visualisation and control • Robust metal housing with standard positioned mounting holes and two different output configurations • Working distance of 10 mm ±3 mm • Two lens positions (on-axis or right- angle) and two spot positions (vertical or horizontal) possible Automatic detection of any colour mark

1831 Diegem • Belgium Tel: +32 2 456 07 80 Fax: +32 2 456 07 89 E-mail: [email protected] Web: www.bannereurope.com BANNER ENGINEERING EUROPE E-A079 – 02/2007 Authorised distributor: SAFETY SENSORS VISION Objective: To detect registration marks on food packaging. Description: The R58 Expert automatically chooses one of three sensing LEDs – red, green or blue to maximise contrast when detecting registration marks. Registration Mark Detection Objective: To identify splices on a roll of paper. Description: The highly sensitive R58 Expert detects the inconspicuous splice in a roll of paper, ensuring that the printer skips over the splice. Splice Detection in a Paper Roll On-axis or right-angle lens position possible Power LED Dynamic TEACH (+) Push Button Dark Operate LED Light Operate LED Static TEACH (-) Push Button Output LED ON-Delay Switch Point 8-Segment Light Bar Objective: To detect registration marks on tubes for correct positioning before filling. Tube Registration Mark Detection Versions available with M12x1 connector (5-pin) or cable Horizontal spot position 3 LED colours available Vertical spot position