Kawasaki Mule SX Assembly Instructions
Read Online
Read the Kawasaki Mule SX Assembly Instructions online using the built-in PDF viewer.
Text of the manual
Interior Rear View Mirror Kit
Mule SX
1 Hour
Improper installation of this accessory could result in an accident causing serious bodily injury or
death. To prevent an accident, be sure that this accessory is properly and securely installed on
your vehicle. If you cannot properly install this accessory yourself, have a professional installer,
such as an authorized Kawasaki dealer, install it for you.
Prior to each use, check to be sure the accessory is securely attached to the vehicle and periodi-
cally inspect the accessory for any required adjustment, wear, and damage.
WARNING
IM-99994-0906_Rev05
Page 1 of 3
© 2016 Kawasaki Motors Corp., U.S.A.
Rear View Mirror
1
A02
#10-32 x 3/4” Flat Head Screw
2
A03
#10-32 Hex Nylon Locking Nut
2
Parts Diagram:
A01
A03
A02
Page 2 of 3
IM-99994-0906_Rev05
1. Park the vehicle on level ground, set the
parking brake and turn off the ignition switch.
2. Install the mirror mount to the windshield sup-
port through the predrilled holes in the center
of the support with the #10-32x 3/4” Flat head
screws and #10-32 Nyloc nuts.
3. Position mirror over stud portion of mount
and install finger nut, do not completely tight-
en at this time.
4. Adjust mirror for best viewing, now complete-
ly tighten finger nut.
Page 3 of 3
IM-99994-0906_Rev05
