IBM Aptiva Handbook

6ROYLQJ KDUGZDUH DQG VRIWZDUH SUREOHPV Solving hardware problems Table 1: Hardware problems If the problem is: Here's what to do: Screen is black (no error code); beep during power on self-test (POST). If you installed memory modules or adapter cards, make sure you installed them correctly. For instructions on installing memory modules on your system board, see “Installing memory modules” on page 9-6. For instructions on installing adapter cards in your system unit, see “Adding and removing adapter cards” on page 8-3. Error code (and desc ...

$GMXVWLQJ WKH VSHDNHU YROXPH The volume control of the speaker is affected by the volume control setting in the multimedia software that came with your computer. For example, if no sound comes out of the speakers, the volume setting in your multimedia software might be too low. The multimedia software volume controls are located in the multimedia mixer programs. $GMXVWLQJ WKH KHDGSKRQH YROXPH You may be able to plug headphones into the headphone jack on the CD-ROM drive (not available on all systems) or into the line-out jack on the ...

problems with the hardware, software, and features installed in your computer at the factory. This part contains the following chapter: � ������������������������������������������������������ ������� ���� This chapter provides troubleshooting information, including error code interpretations. It also includes information to help you recover facto ...

5HPRYLQJ PHPRU\ PRGXOHV To remove a DIMM, press the holding clips on both sides of the socket outward to release the DIMM. 9HULI\LQJ WKH V\VWHP PHPRU\ To view the system memory settings in Setup, select "System Summary" from the Setup main menu. 5HSODFLQJ WKH V\VWHP EDWWHU\ Follow these steps to replace the battery: 1. Press the securing clip on the battery socket to release the battery. 2. Lift the battery from the socket. ...