Barco GALAXY 12 HB+ Specifications

with built-in color matching and WARP™ predistortion The Barco Galaxy Family The Barco GALAXY family has a proven record for active and passive stereo technology. It is the only 3-chip DLP™ projector offering the unrivaled platform for Infitec+™, the superior stereo separation technology combining high contrast with excellent stereo separation. These stereo projectors are also available in mono version. • SXGA+ resolution (1400x1050) • 4:3 aspect ratio: compatible with all widely used resolutions • Built-in STEREO-CREATOR™, including DVI sources • I-Blend™ supports up to three channels Classic GALAXY 7 Classic+ • 7000 / 4650 lumens • 1600:1 High Brightness GALAXY 12 HB+ • 12000 / 9000 lumens • 1600:1 / 1800:1

spectrum in two parts: one for the left and one for the right eye. Barco positioned the Infitec+™ filters at the ideal location inside its DLP™ and LCD projectors. The matching Infitec+™ filters in the pair of Infitec+™ glasses make sure the correct information passes through to the corresponding eye. Active Infitec+™ achieves its optimal performance with 3-chip DLP™, an exclusive Barco development. Infitec+™ is completely free of flickering. GALAXY with Active Infitec+™: 13% overall efficiency GALAXY with DLP™ active stereo: Extra fast refresh rate (118 Hz) allows for high-resolution active stereo with minimal flicker. GALAXY with DLP™ active stereo: 16% overall efficiency Barco GALAXY with passive circular or linear polarization. Especially suited for stereo presentation to large audiences. Different brightness versions depending on room size and environmental lighting conditions. Blue area Green area Red area Filter 2 T= transmission wavelength T= transmission Filter 1 Unrivaled stereo separation Barco’s optimized Infitec+™ Full freedom of motion. No ghosting Projection on standard screen, no need for non-depolarizing screen Barco Galaxy family... One consistent projection platform Classic GALAXY 7 Classic+ • 7000 ANSI lumens • 1600:1 High Brightness GALAXY12 HB+ • 12000 ANSI lumens • 1600:1 Two choices for optimum performance 3 mm afsnijden

(CADWalls) cylindrical and conical screens (e.g. Decision Centers) and hemispherical screens (Dome constructions, planetariums). Test charts scaled using generic bilinear algorithm as used in most common projectors. Test charts scaled using WARP™ algorithm with proprietary bi-cubic interpolation to preserve fine detail in the image and suppress resampling artifacts. Optimized Soft Edge Matching Multi-channel setups of light valve projectors lead to brighter overlap zones. Barco’s standard ELECTRONIC SOFT EDGE MATCHING technology allows you to adjust edge blending to uniform level. Barco’s proprietary OPTICAL SOFT EDGE MATCHING blending maintains the black level in the overlap zone to that of the separate images. This solution is preferred when deep blacks are very important e.g. in planetariums. The Barco Galaxy family: Developed for high Left Right Optical Soft Edge Matching: Black level in overlap zone is equivalent to seperate images Left Right True black Projector black Electronic adjustable black SXGA+ resolution (1400x1050) Enhanced contrast ratio from 1600:1 to 1800:1

An integrated, calibrated light meter measures and controls the light output. A projector set at e.g. 4000 lumen maintains this brightness over time, independent of lamp life. • New and used lamps can be mixed, brightness controlled • Not all lamps need to be changed at the same time With the Linked CLO the brightness of all linked projectors is monitored and adjusted to the lowest value. DynaColor™color matching DYNACOLOR™ provides the ultimate electronic fine tuning to digitally set the primary and secondary color coordinates to obtain perfect color matching across a system. Part of DYNACOLOR™ is the improved grayscale tracking controlling the black, white and grays across the different channels of the multi-channel setup. Linked DYNACOLOR™automatically aligns the projector to a common color triangle. This ensures that all projectors in the entire system have exactly the same primary and secondary color coordinates. The system auto-senses the addition of a new projector to a system and updates the common color triangle as required. The linked DYNACOLOR™ option is enabled with the linked CLO option i-Blend™: Three channels with a single PC A single high-bandwidth PC or workstation output (>170 MHz) generates a wide high-resolution image, that is fed to all projectors. Each then selects the area to display - including overlap - using the I-BLEND™functionality. Depending on the application, ELECTRONIC or OPTICAL SOFT EDGE MATCHING can be used. The initial low-refresh rate image is upconverted to 112 Hz using the built-in Stereo-Creator. Unique visualization sys -resolution, multi-channel visualization Light output: from 4650 to 12000 ANSI lumens e.g. 40 Hz Stereo-Creator™ 112 HZ Photo courtesy of Sivax - Japan

components (projectors, screens, mirrors) in-house, products with almost identical color gamut can be selected to obtain optimal color uniformity in a single system and even between various systems. Barco’s Optocolor™ software tool calculates optimal common color values for multiple systems. Using DYNACOLOR™ existing color uniformity can then be further enhanced to reach an optimal match between all systems. A GISCU™ maintenance contract covers the multi-system and multi-site color matching, including: • the Color Gamut Matching of all new systems • the color matching initialization of all systems • regular tune-up and color adjustment of all systems em upgrades Barco’s Global Inter System Color Uniformity (GISCU™) guarantees that all colors (e.g. sapphire black metallic on a car) are perfectly matched on all Barco systems, even if located in geographically different sites. Stereo-Creator™: Three channel stereo with a single-pipe IG. Native SXGA+ resolution The STEREO-CREATOR™ is a market-leading, patented Barco technology, which enables you to drive up to three blended stereo GALAXY projectors in native SXGA+ resolution with a single pipe image generator, without any need for external equipment. A major advantage for the user is the GALAXY SXGA+ projectors’ direct feed of native SXGA+ high-resolution information. It contains far more detail while omitting possible artifacts and delays caused by external scalers, warping or blending boxes. GISCU™: Multi-system and multi-site color matching 3 channels with overlap bandwidth scaler WARP™ & blend box matrix switch output at 1024 x 768 1400 x 1050 native resolution 1400 x 1050

Weight lbs kg Net weight 124 56 Shipping weight 210 95 Dimensions Inch mm W 20.84 529 L 31.29 795 H 16.05 408 Shipping dimensions Inch mm W 31.50 800 L 47.24 1200 H 29.52 750 www.barco.com/virtualreality Barco Simulation division US Headquarters: 600 Bellbrook Avenue - Xenia, OH 45385-4053 Tel. +1 (937) 372-7579 • Fax +1 (937) 372-8645 email: [email protected] European Headquarters: Noordlaan 5, B8520 Kuurne - Belgium Tel. +32 56 36 82 11 • Fax +32 56 36 86 51 email: [email protected] Ref.no. R599785 September 2006 Barco Simulation is an ISO 9001 registered company. The information and data given are typical for the equipment described. However any individual item is subject to change without any notice. The latest version of this product sheet can be found on www.vr.barco.com. WARP, Stereo-Creator, i-Blend, DynaColor, Lamp Flicker Reduction (LFR) are trademarks of Barco n.v. Infitec is a trademark from DaimlerChrysler Research and Technology Ulm, licensed to Barco DLP, Digital Micromirror Device, DMD are trademarks of Texas Instruments. Other, non-Barco product names appearing in this brochure are trademarks/registered trademarks of their respective owners. DESIGNED UNDER ISO Digital Micromirror Device™ 3 high-resolution SXGA+ active stereo DMD™’s Native resolution 1400 x 1050 (SXGA+) Standard features • Bi-cubical WARP™ • Synchronous and asynchronous active stereo display • DYNACOLOR™/ Linked DynaColor™ • STEREO-CREATOR™ on RGB and DVI • i-Blend™ (three-channel) • Economy mode • Shutter Optional features • OPTICAL SOFT EDGE MATCHING (OSEM) • INFITEC™ (switchable) • External polarization (linear or circular) • GISCU™: multi-system and multi-site color matching Compatibility • Active Stereo capabilities up to SXGA+ at 118 Hz • WARP 6™ based pixel map processor using bi-cubic interpolation algorithms for advanced geometry correction up to a pixelclock of 205 MHz • All current video sources in RGB or DVI Noise level < 60 dBA at 40°C < 54 dBA at 20°C Fixed analog inputs 1 multifunctional 5-Cable input (high band width) for the connection of: • RGB analog signals with standard sync (BNC connectors), sync on green or separate sync • 1 Stereo sync input (mini din) • 2 Stereo sync outputs (coax) • 1 DVI input Communication • RS232 or RS422 loop-through input (D9- connector) for PC-based projector control • Communication input (D9 connector) for peripherals Lens type Throw ratio Fixed Lens (Manual Focus) TLD (0.8:1) HB* - 9842040 0.75 TLD+ (1.2:1) - 9840775 1.23 Motorized Zoom and Focus TLD (1.6-2.0:1) HB* - 9842060 1.5 to 1.8 TLD (2.0-2.8:1) HB* - 9842080 1.8 to 2.6 TLD (2.8-5.0:1) HB* - 9842100 2.6 to 4.6 TLD (5.0-8.0:1) HB* - 9842120 4.6 to 7.3 * High brightness lens Shift Motorized V shift: up to 100% Motorized H shift: up to 65% H W L Specifications GALAXY 7Classic+ GALAXY 12HB+ Normal Economy Normal High Contrast Light output (ANSI lumens) 7000 4650 12000 9000 Brightness uniformity (for the total screen area) >90% >90% >90% >80% Contrast ratio (full white/full black) 1600:1 1600:1 1600:1 1800:1 Lamp power (Xenon illumination system) 1.2 kW 800 W 2.2 kW 2.2 kW • Typical lifetime 1200 hours 1700 hours 800 hours 800 hours • Max. lifetime 1500 hours 2000 hours 1200 hours 1200 hours CLO/Linked CLO yes yes Power consumption 1700 Watts 1400 Watts 2750 Watts 2750 Watts Ambient temperature Max. 35°C Max. 35°C Max. 35°C Max. 35°C Order number R9040361 R9040371