Coopers 8829 Instructions For Use

Instructions for Use Please read and retain these instructions for future reference v002: 13/03/17 PLEASE SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Parts List 4x Bolts for pedals/handlebar 2x Foot bar 1x Plastic sleeve 4x End Caps 2x Tension control knobs 1x Frame 1x Screw for plastic sleeve 2x Foot Pedals 4x Nuts for foot bar 1x Upper tube 2x Locking nuts 2x Handlebar pedals 4x Bolts for foot bar 1x Lower tube 2x Bolts Fit plastic cap onto each end of the foot bars. Secure the foot bar to the frame. Using nuts and bolts supplied. Place the two bearings around the steel pedal rod with the metal tension piece fitting in the groove. Slide the bearings and steel rod into the bearing case. Tighten down the tension control knob before putting on the pedals. Push pedal onto the steel rod. Tighten bolts with the Allen key.

Instructions for Use Please read and retain these instructions for future reference v002: 13/03/17 Push the second pedal onto the steel rod and tighten bolt with the Allen key. Repeat steps A to E to assemble the handlebar pedals. Assemble the lower upright tube to the base unit using the locking nuts and bolts supplied. Put the upper into the lower tube, and slot black plastic sleeve on. Adjust to correct height and tighten screw before use. Turn tension knob to adjust the resistance of the pedals for easy or harder pedalling. WARNING:  Do not over tighten the tension knob. Do not use tools to tighten. Damage may occur to the bearing case if over tightened.  Surface around the tension knob and crank bearings may get hot if used continuously for 20 mins. Please stop and allow to cool before re-use. CAUTION:  Please remember the Exerciser is for use when sitting.  Do not stand or place your weight over the top portion of the Exerciser.  Always use the foot straps when pedalling.  Maximum pedal force of 80Kg  Warning! Surface around the tension knob and crank bearings may get hot if used continuously for 20 mins. Please stop and allow to cool before re-use. DISPOSAL: • Dispose of all packaging, paper, cartons and plastic, plastic bags in accordance with your local recycling regulations. • At the end of the product’s lifespan please dispose of it at an authorised household waste recycling centre.