Compatico CMW Series Disassembly Instructions
Read Online
Read the Compatico CMW Series Disassembly Instructions online using the built-in PDF viewer.
Text of the manual
5005 Kraft Ave SE, Suite A Grand Rapids MI 49512 616‐940‐1772 800‐336‐1772 fax 616‐940‐1040
www.compatico.com www.compaticoparts.com www.hushtiles.com
CMW�Disassembly�Instructions�
Disassembly instructions are publicly available on our website – www.compatico.com
5005 Kraft Ave SE, Suite A Grand Rapids MI 49512 616‐940‐1772 800‐336‐1772 fax 616‐940‐1040
www.compatico.com www.compaticoparts.com www.hushtiles.com
CMW�Disassembly�Instructions�
A. Steel
B. TAAC™
C. Polyether Polyurethane Foam
D. Steel
/ABS Plastic
TOOLS REQUIRED:
1. Phillips and Flathead screwdrivers
2. Hammer or Mallet
Estimated Disassembly time: approximately 20 minutes
Denotes materials that can be recycled in at least 6 of the 10 U.S.
EPA regions
Visit www.compatico.com under the Sustainability page for our Recycling
Infrastructure Matrix and End of Life Recovery Options Matrix.
5005 Kraft Ave SE, Suite A Grand Rapids MI 49512 616‐940‐1772 800‐336‐1772 fax 616‐940‐1040
www.compatico.com www.compaticoparts.com www.hushtiles.com
Work�surface�Disassembly�Instructions�
A. Steel parts
B. Laminated composite wood
C. Flexible PVC Plastic
TOOLS REQUIRED:
1. Cordless drill
2. Phillips screwdriver
Estimated disassembly time: approximately 30 minutes
Denotes materials that can be recycled in at least 6 of the 10 U.S. EPA regions
C. Door Component = either steel or laminated composite wood
TOOLS REQUIRED:
1. Flathead and Phillips Screwdrivers
2. Cordless drill
3. 3/8 wrench
Estimated disassembly time: approximately 10 minutes
Denotes materials that can be recycled in at least 6 of the 10 U.S. EPA regions
A. Steel Components
B. Cement
C. Steel Face
D. Zinc or plastic
E. Steel
and plastic
TOOLS REQUIRED: 1. Cordless Drill
2. Flathead and Phillips Screwdrivers
Estimated disassembly time: approximately 20 minutes
Denotes materials that can be recycled in at least 6 of the 10 U.S. EPA regions
