CHC i80 Manual
Read Online
Read the CHC i80 Manual online using the built-in PDF viewer.
Text of the manual
i80 GNSS Receiver Quick Tour with FieldGenius (PDA Network Mode)
1
1.Prerequisites
Hardware: CHC i80 rover , Controller Kit, SIM
card ,Lithium Battery, pole
Software: FieldGenius8
2.Steps to set i80 working as
rover
in
DCI
mode
with
FieldGenius
2.1 Rover installation
Insert the SIM card to data collector, screw
the rover receiver on the pole, and put the
Controller adapter in the right place like the
figure.
2.2 Connect Data collector to Internet
via Wifi
1.
click on [Start]-[Setting]
2.
Click
on
the
[connections]-[Wireless
Manager]
i80 GNSS Receiver Quick Tour with FieldGenius (PDA Network Mode)
2
3.
Click on Wifi if it is closed which means
off
4.
Click on [Menu]-[Wifi setting] to connect
to Wifi hotspot
5.
Then choose a Wifi to connect
Once [Connected],click [OK] (upper right
hand corner)
6.
Finally click on [OK] on lower left corner.
Then the connection will be created and you
can open your browser to access any website
to check.
i80 GNSS Receiver Quick Tour with FieldGenius (PDA Network Mode)
3
2.3 Connect Data collector to Internet
via SIM card
If cannot connect to Wifi, you can work with
mobile network in your data collector.
1.
click on [Start]-[Setting]
2.
Click on the [connections]
3.
Click
on
the
[Manage
existing
connections]
4.
Long press the [My connection] then
click [Connect]
5.
Then the connection will be created and
you can open your browser to access any
website to check.
i80 GNSS Receiver Quick Tour with FieldGenius (PDA Network Mode)
4
2.4 Rover setting in FieldGenius
1.
Power on the receiver
Long press the i80 power button until the
green and blue LED lights are on.
2.
Click on [start] and then FieldGenius.
3.
Click [New Project] to create a project or
Click [Open] to open one exist project.
4.
A project file should be selected then
click [Continue] for next step
5.
Click on [Select Instrument]
i80 GNSS Receiver Quick Tour with FieldGenius (PDA Network Mode)
5
6.
Select [GNSS Rover] option then click
[Edit] to select device and linking method
7.
Click [Antenna Height] tab to set the
antenna height of the receiver
9.
Click
[Model
and
Communication]
tab→select Make as [CHC], Model as [i80],
Port as [Bluetooth] → click [Bluetooth Device
List] to add bluetooth device
i80 GNSS Receiver Quick Tour with FieldGenius (PDA Network Mode)
6
10. Click [Search] to search the around
Bluetooth device.
11. Click on the device that matches your
device serial number, then click it
12. Type in the PIN Code of the bluetooth
then click [OK] button to finish the device
edit.
i80 GNSS Receiver Quick Tour with FieldGenius (PDA Network Mode)
7
13. Then our target device can be selected in
the bluetooth device list. Click [OK] button
back
to
[Model
and
Communication]
interface.
14. The target device can be selected in the
drop-down box then click [Connect] button.
The software will build the connection to your
device
14. Select the Link Device as [Data Collect
Internet] from the drop-down box, select the
Data Format as [Auto Detect] then click the
[Setup] button.
15. Please select the Source Type as NTRIP.
Click [Press to modify] button to create a
NTRIP
account
information.
i80 GNSS Receiver Quick Tour with FieldGenius (PDA Network Mode)
8
16. Please click the [Add] button
Type in your CORS information in the blank.
Then
click
the
[Ok]
button
After that the new CORS can be selected in
the list, please select the CORS you want to
use then click [Select]
Then click [Ok] button to finish setting
i80 GNSS Receiver Quick Tour with FieldGenius (PDA Network Mode)
9
17. Click [Connect] to finish starting rover
18. Then the green LED will flash and the
states will become [Autonomous] to [float]
then to [fix],which means the rover is getting
the correction data from base.
19. The survey work can be done with the
i80
