One Stop Gardens 90975 Assembly Instructions

Visit our Web site at http://www.harborfreight.com Copyright© 2004 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353 ® COTTON HAMMOCK WITH FRAME ASSEMBLY INSTRUCTIONS 90975 all-guides com

You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference. Safety Warnings and Precautions WARNING: When using this product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Read all instructions before using this product! 1. Keep children away. Children must never be allowed to climb into this product without adult assistance . Flipping over can occur and can result in injury. 2. Position this product on a flat grassy area. 3. Stay alert. Watch what you are doing. Use common sense. Do not try to exit this product without assistance when you are tired or you could lose your balance. 4. Check for damaged parts. Before using this product, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for cracked or rusted rings, torn or worn canvas, loose bolts, worn ropes, or any other condition that shows wear and tear of this product. Replace or repair any broken or worn parts before use. If any part of the Hammock (9) is worn we suggest you replace the entire Hammock (9). 5. Do not leave out in harsh weather conditions. Sunlight or rain can rot rope and canvas. Always check the condition of this product before sitting or lying upon this product. DESCRIPTION Powder Coated Steel 133”L x 48-1/2” W x 56-1/4” H 100% Cotton -74” L x 46-1/2” W Wooden Brace with Steel Rings and Woven Rope 350 Lbs. 46 Lbs. ITEM Frame Overall Dimension Hammock End Supports Weight Capacity Net Weight

are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. Assembly 1. Locate both Bases (2). Place each Elbow (3) over each Base (2), line up the bolt holes, and fix in place using the 4 sets of Elbow Nuts and Bolts (5). See Figure A. Figure A 2. Select a surface that will not scratch the finish of the frame. Place both Elbows (3) on each side of the Center Joining Tube (4) so that the horizontal ends are on the inside. See Figure A. 3. Insert the Center Joining Tube (4) over the lower part of one Elbow (3) as far as it will go. Line up the Center Joining Tube Bolt (6) with the notch on the Elbow and tighten partially. Repeat on the other side. Tighten both Center Joining Tube Bolts securely. (Check for tightness periodically). See Figure A. 4. Attach Square End Caps (7) onto both ends of each Base (2). See Figure D. 5. Insert the Risers (1) over the upper part of the Elbows. Be sure the notches for hanging the Hammock (9) are facing inwards. See Figure B. The Risers (1) should rest on the Ring Stopper on the Elbow ( 3). See Figure C. Center Joining Tube (4) Riser (1) Center Joining Tube Bolt (6) Base (2) Elbow (3) Elbow Nut and Bolt (5) 6. Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. 7. Do not use or assemble under the influence of alcohol or drugs.

2. Dismantling and storing during harsh weather will prolong the life of the Hammock. 6. Hook the Metal Rings on the Cotton Hammock (9) (left and right) over the Notches. Test to see that Hammock is securely attached before getting into the Hammock. See Figure D. 7. Attach Round End Caps (8) onto the ends of the Risers (1). See Figure B. Metal Rings Metal Rings Cotton Hammock (9) Figure D Square End Caps (7) Round End Cap (8) Ring Stopper on Elbow (3) Riser (1) Elbow (3) Riser (1) Notches Facing Inside Figure B Figure C Metal Rings

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES That ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. PARTS LIST 1 2 3 4 5 6 7 8 9 8 2 4 6 3 7 2 2 2 1 4 sets 2 4 2 1 Riser Base Elbow Center Joining Tube Elbow Nut and Bolt Center Joining Tube Bolt Square End Caps Round End Caps Cotton Hammock with Wooden Spreaders PART DESCRIPTION QTY. 6 1 5 9