Baumatic BFW1000W Instruction Manual

make sure that you read it before using your Washing Machine for the first time. It also contains valuable Troubleshooting tips so that you can solve faults without having to call for a service engineer. Instruction Manual for your Baumatic BFW1000W FULLY ELECTRONIC WASHING MACHINE Please note: for fast access to using your Washing Machine, please look at the bold-font items listed on the Contents page (page 3). DD 13/02/07

2 SSPPEEC CIIFFIIC CA ATTIIO ON NSS O OFF Y YO OU UR R B BA AU UM MA ATTIIC C W WA ASSH HIIN NG G M MA AC CH HIIN NEE

Your Washing Machine’s Control Panel………………………………..…….……...….5 Start / Pause Button………………………………………………………..………………………..5 Function Indicator Lights…………………………………………………….…………………..…5 Function Buttons……………………………………………………………………………………..…6 Easy Iron Function …………………………………………………………….………………………..6 Washing Your Laundry…………………………..…………………………………..……………..7 Before Loading Your Washing Machine………………………………………………..…..7 Washing Labels and their Meanings…………………………………………………………..…8 Loading Your Washing Machine……………….………………………………………………..9 Filling Your Washing Machine’s Dispenser Drawer with Detergent……9-10 Running Your Washing Machine……………………………………………………………...11 Using the Program Knob………………………………………………………………………..…11 Washing Tables……………………………………………………………………………………..12-13 Starting a Washing Program……………………………………………………………………..14 Changing a Program…………………………………………………………….……………………..14 Cancelling a Program……………………………………………………………………………….…14 Ending a Program……………………………………………………………………….………….14-15 Child Lock…………………………………………………………………………………………………..15 Maintenance & Cleaning ..………………………………………………………………………..16 Water Inlet Filters ……………………………………………………………………………………..16 Pump Filter………………………………………………………………….........................17 Cleaning the Detergent Drawer………………………………………………………………...18 Cleaning the Siphon Plug…………………………………………………………...............18 Cleaning the Cabinet…………………………………………………………………………………..19 Cleaning the Drum……………………………………………………………………………………...19 Notes on Stains and how to Remove them from your Clothes……………..20-21 Troubleshooting……………………………………………………..………………………….…22-24 Error Codes………………………………………………………….………………………….…...25-26 Installation Instructions………………………………………………………………..………27-29 Directive Conformity Confirmation……………………………………………………….30-31 Conditions of Guarantee…………………...………………………………………............32 Contact Details………………………………………………………………………………………..…33

WARNING: THIS IS IMPORTANT SAFETY INFORMATION. PLEASE READ THIS BEFORE USING YOUR WASHING MACHINE. : DO NOT USE AN EXTENSION CORD OR PLUG INTO A MULTIPLE SOCKET. : DO NOT INSERT A PLUG WITH A DAMAGED CORD OR THAT IS BROKEN INTO THE SOCKET. : IF THE CORD IS DAMAGED IT SHOULD BE REPLACED BY THE MANUFACTURER OR APPOINTED SERVICE AGENT IN ORDER TO AVOID A HAZARD. : NEVER REMOVE THE PLUG FROM THE SOCKET BY PULLING FROM THE CORD SECTION. HOLD THE PLUG AS YOU PULL IT OUT. : DO NOT PLUG INTO THE POWER SUPPLY IF YOUR HANDS ARE WET. : DO NOT TOUCH THE MACHINE WITH WET HANDS OR FEET. : DO NOT OPEN THE DETERGENT DRAWER WHILE THE DEVICE IS RUNNING. : DO NOT FORCE OPEN THE DOOR OF THE MACHINE WHILE THE MACHINE IS RUNNING. : DO NOT TOUCH THE DRAIN HOSE AND WATER DURING DRAINING – THE WASHING MACHINE CAN REACH HIGH TEMPERATURES DURING DRAINING. : DO NOT ATTEMPT TO REPAIR. PLEASE APPLY TO THE NEAREST AUTHORISED SERVICER. : DO NOT FORGET THAT THE PACKING MATERIAL OF YOUR MACHINE MAY BE HAZARDOUS FOR CHILDREN. : NEVER LET YOUR CHILDREN PLAY WITH YOUR WASHING MACHINE. : KEEP PETS AWAY FROM YOUR MACHINE. : ONLY USE YOUR WASHING MACHINE IN THE HOME. THE WARRANTY WILL BE INVALID SHOULD YOU USE IT FOR COMMERCIAL PURPOSES.

Control Panel *NOTE: Your Washing Machine has soft-touch buttons. You only need to press these lightly to operate your machine. You need to make sure that the program knob has been brought fully to the STOP position before selecting a new program or changing between programs. Function indicator lights When the ‘START/PAUSE’ or any other function button is pressed, the corresponding light will come on. The light goes out when the function or ‘START/PAUSE’ Button is pressed again, or when the washing cycle has completed.

going to be taking your clothes out of your washing machine immediately after the end of a program. This will keep wrinkles from appearing, as when the button is pressed, the last rinsing water is not drained. Press this button again to make it continue from the same point and finish the cycle. If you do not want your sensitive clothes to be spun or if you want them to be spun gently: 1) Make sure that you turn the Program Knob to the ‘STOP’ position. 2) Then turn the Program Knob round to one of the draining or spinning programs you want and press the ‘START/PAUSE’ button. Â If the program you have selected is a drain program, your machine will start draining the water inside it. Â If you have selected a spinning program, your washing machine will perform a spin first then end the washing cycle. EASY IRONING The Easy Ironing function will make your clothes come out less wrinkled after a washing cycle.

NOTE: (*VERY IMPORTANT*) – You must ensure that the transportation bolts have been removed before you attempt to use your Washing Machine. See pages 27-29. Only once you are sure this has been done, can you do the following: 1) Plug in you machine 2) Turn on the water supply Note on using your Washing Machine for the first time: There may be water left inside your machine after factory tests and trials. • The first time you run a wash cycle, you should not put laundry in your machine as it needs to clear this water out. o Pour half a measuring cup of normal or all purpose detergent into compartment 2 in your detergent dispenser and select the cotton program for 90°C. _____________________________________________________ Before Loading your Washing Machine: • Separate your laundry between clothes of different types (cotton, synthetic, sensitive, woolen, etc.); the temperatures they need to be washed at;, and how dirty they are. • Never wash your white and coloured clothes together. • Since your new coloured clothes may shed dye on the first wash; wash them separately. • Be careful that no metal pieces are in the pockets of your clothes. There is the chance of rust residues coming off and causing stains. • Zip-up and button your clothes. • Remove the plastic or metal hooks of curtains or place them inside a washing bag and tie. • Pull textiles like trousers, knitted fabric, T-shirts and sweatshirts inside out. • Wash small clothes like socks and handkerchiefs in a washing bag.

BEFORE ATTEMPTING TO WASH THEM: WASHING LABELS & THEIR MEANINGS

Machine ƒ Open the door of your washing machine. ƒ Load your clothes inside the drum one item at a time and spread them about well. ƒ When you shut the door of your machine, be careful that no pieces of clothing are jammed between the door and the gasket seal. ƒ Shut the door of your machine tightly, otherwise your machine will not start the washing process. Filling your Washing Machine’s Dispenser Drawer with Detergent The amount of detergent you will need depends on the following: • You will need more detergent for washing cycles containing dirtier clothes. o For very dirty clothes, select a program with pre- washing, fill compartment 1 with ¼ of the amount of the detergent you are putting in compartment 2. o For clothes that are only slightly dirty, do not pre-wash and put only a small amount of detergent into compartment 2 in your washing machine’s dispenser drawer.

amount that you will need for different washing loads and types will be written on the packaging of your detergent. The harder the water in your area, the more detergent you will need to use. SOFTENERS 9 Fill the softener compartment in your detergent drawer with softener. Do not exceed the MAX level. Otherwise, the softener will diffuse in the washing water through the siphon. 9 Softeners with high density (thick softeners) should be diluted with water before filling the drawer. This is because it will block the siphon and prevent the flow of the softener. FLUID DETERGENTS 9 You can use fluid detergents in all programs without pre-washing. For this, move the fluid detergent level plate in the second compartment of the detergent drawer and pour in the amount of fluid detergent according to the levels on this plate. _________________________________________________________

Select the program that’s right for the clothes you want to wash according to the Table on the next page. THE PROGRAM KNOB With the program knob, you can select the program you’d like to wash your clothes with. You can adjust the program selection process by turning the program knob in both directions. You must be careful that the marker on the Program Knob points exactly to the program you want to select. *NOTE: If you turn the Program Knob to the STOP position while your machine is running, you will end the washing cycle prematurely. By pressing the ‘Start / Pause’ button, you can start the program you have selected or pause a running program. See next page for a list of the different programs you can select.

WANT TO PUT INTO YOUR WASHING MACHINE AND CHECK IT AGAINST THE MAXIMUM WEIGHT ALLOWED. PROGRAM DETERGENT COMPART- MENT ADDITIONAL FUNCTION BUTTON MAX DRY LOAD (Kg) TYPE OF LAUNDRY EXAMPLE OF CLOTHES 2 5 Dirty, boil, cotton & linen 1+2 5 Very dirty, cotton, coloured & linen 2 5 Dirty cotton, coloured & linen 2 5 Slightly dirty, paint -stained, cotton, coloured & linen 2 5 Dirty, cotton, colour -ed & linen 2 5 Slightly dirty cotton, coloured & linen 2 5 Slightly dirty cotton, coloured & linen 2 5 Slightly dirty cotton, coloured & linen. Washed in cold Water. 2 5 Dirty or heavily stained cotton, coloured and linen textile Underwear, sheets, Table cloth, T-shirts, towels

synthetic mixture Nylon socks, blouses. 2 3 Baby laundry All baby laundry 2 3 Slightly dirty, synth- thetic or synthetic mixture Nylon socks, blouses 2 3 Sport clothes Sports clothes/ Jeans 2 3 Slightly dirty, Synthetic or synth- etic mixture. Sensitive cold wash laundry Nylon socks, blouses 2 2 Tulle and curtains. Sensitive laundry. Tulle, curtain, Diolen, dralon 2 2 Slightly dirty, cotton, Coloured, synthetic or synthetic mixture Sensitive laundry. 2 2 Very slightly dirty, cold wash cotton, coloured, synththetic or synthetic mixture laundry. Silk mixture, shirt, blouses, polyester, Pollamid, Mixture of textiles 2 2 Slightly dirty, wash By hand cotton, Coloured, synthetic or synthetic mixture laundry. All hand wash laundry 2 2 Dirty, hand & machine Wash wool laundry 2 2 Very slightly dirty, Cold water, hand & Machine to wash Wool laundry All wool laundry When you need an additional rinsing to be done to your clothes after the washing process, you can use this program for all kinds of clothes. When you need an additional spinning to be done to your clothes after the washing process, use this program for all kinds of clothes. Use this program to drain the dirty water inside your machine after a washing cycle. If you want the water inside your machine to drain before the washing cycle completes, use this program. *PLEASE NOTE - You can use softeners in all programs (except spinning and draining programs) optionally. Always check on your softener’s packaging for the amounts to use. Pour it into the softener compartment ( ) of the detergent drawer.

• Adjust the program knob to a program you desire (see previous page) o The ‘PROGRAM READY’ light will come on. o If you want, you can select one or more additional functions. • Run the program which you have selected by pressing the ‘START/PAUSE’ button. ______________________________________________________________ Changing the Program If you have a selected a program and you don’t want it to continue • Press the ‘START/PAUSE’ button. • Turn the Program Knob to the ‘STOP’ position. • Adjust the Program Knob to the program you want. You can select this from Table 1 (see previous page). o The ‘PROGRAM READY’ light will come on. • By pressing the Start/Pause button, you can run the program that you have selected. ______________________________________________________________ Cancelling a Program If you want to end a running program early. • Press the ‘START/PAUSE’ button. • Turn the program knob to ‘Draining’ or ‘Spinning’ programs. • The ‘PROGRAM READY’ light will come on. • Run the program you have selected _______________________________________________________________________________ Ending a Program • Your Machine will automatically stop when the program you have selected ends. • The ‘Program End’ light will be on. • Turn the PROGRAM KNOB to the ‘STOP’ position.

open the door right away. 9 It will unlock approximately two minutes after the program ends. You can then open the door by pulling the handle of the door towards yourself. o Take out your clothes. o After you unload your clothes, leave the door open to dry the inside of your machine. o Unplug your Washing Machine. WARNING! If the power is off and on again after a while at any stage of the washing program, your machine will continue the program from the same place it had stopped. Note that this is not harmful for your machine. ______________________________________________________________ Child Lock The Child Lock prevents unauthorized changes on the control panel while the machine is in operation. The child lock will be activated after the ‘Start/Pause’ button on the control panel has been pressed for longer than 2 seconds. To unlock your washing machine, you will need to PRESS THE SAME BUTTON FOR LONGER THAN TWO SECONDS. *NOTE - At the end of a program, the child lock will automatically turn off.

Please note: Before attempting any kind of maintenance or cleaning on your washing machine: 9 Unplug your machine 9 Close the Water Tap . WATER INLET FILTERS On the tap part of your machine’s water inlet hose and the ends of the water inlet valves, there are filters to prevent dirt and foreign materials from getting into the water. * Note: If your Washing Machine cannot get enough water (even though your water tap is open), it means that these filters will need cleaning. 9 REMOVE THE WATER INLET HOSE 9 REMOVE THE FILTERS FOUND ON THE WATER INLET VALVES BY USING PLIERS AND WASH THOROUGHLY WITH A BRUSH. 9 CLEAN THE FILTERS OF THE WATER INLET HOSES AT THE TAP SIDE BY MANUALLY REMOVING THEM AND THE SEAL. 9 AFTER CLEANING THE FILTERS, FIT THEM BACK IN THE SAME WAY AS YOU HAD REMOVED THEM. _________________________________________________________ PUMP FILTER The PUMP FILTER SYSTEM prolongs the life of your PUMP, which drains away the dirty water. It also keeps lint from entering the pump. You should clean your pump filter every 2-3 months. To clean your PUMP FILTER, see the diagram and instructions on the following page:

away from the lower securing claws and pulling it towards yourself. 9 Before opening the filter cover, place a cup in front of the filter cover to prevent flow of the remaining water in the machine. 9 Loosen the filter cover by rotating it anti-clockwise and drain the water. 9 Remove the foreign materials and build-up from the filter. 9 Check that the pump can rotate with your hand. 9 After cleaning the pump, fit the filter cover back on by rotating it clockwise. 9 Fit the kick-plate back into place, watching how the claws latch into place, and push it closed. * NOTE: Do not forget that if you do not fit the filter cover properly, it will leak water!

Detergents may form sediment in your detergent drawer or in the housing of the detergent drawer over time. • To clean the sediment, pull out the detergent drawer from time to time. To pull out the detergent drawer: • Pull the detergent drawer to the end. (Diagram 1) • Lift the front of the drawer and pull it out (Diagram 2) • After the drawer has dried off, put it back into its housing the same way you had pulled it out. Cleaning the Siphon Plug Pull out the detergent drawer. Remove the siphon plug and clean the residues of the softener thoroughly. Fit the cleaned siphon plug back in place. Make sure it is sitting properly in place. DETERGENT DRAWER

9 Clean the exterior surface of your machine with lukewarm water and a cleaning substance that will not harm or scratch the cabinet. After rinsing with clean water, wipe it with a soft and dry cloth. PLEASE NOTE: If your washing machine is installed in a location where the ambient temperature can fall below 0 °C, do the following (once before you know your machine will be unused for a long time). o Plug in your Washing Machine. o Close the water tap and pull out the water inlet hose or hoses from the tap. o Place the ends of the water drain and water inlet hoses in a cup on the ground. o Adjust the program knob to ‘Draining’ program. o The ‘Program Ready’ light will come on. o Run the program by pressing the ‘Start/Pause’ button. o Unplug your machine when the program is over (program end light is on). * When you complete this process, the remaining water inside the machine will be drained. There will now be no danger of ice forming. When you use your washing machine again, be sure that the ambient temperature is above 0 °C. Cleaning the Drum *PLEASE NOTE: Do not leave metal parts like needles, staples or coins inside your Washing Machine. These items cause rust buildup in the drum. To clean these stains away, use a cleaning substance (that doesn’t have chlorine in it) and follow the manufacturer’s guidelines. Never use dish-washing wires or similarly rough objects. *REMOVAL OF LIME FROM YOUR MACHINE If you use the right amount of detergent in your washing machine, there will be no need for lime removal. However, if you want to use lime removers, please pay attention to their manufacturers’ warnings.

machine have a problem, checking the problem against this chart may keep you from needing to call for service! PROBLEM PROBABLE CAUSE WHAT YOU CAN DO It is unplugged Insert the plug into the socket. Your fuse is defective. Change your fuse. The power is off Check if the power is on or not. Start/pause button has not been pressed. Press the ‘Start/Pause’ button Your Machine doesn’t Work The PROGRAM KNOB is in STOP (off) Status Shut the door properly. You should hear it ‘click’. Water tap is closed Open water tap. The water inlet hose may be bent Check the water inlet hose The valve inlet filter is Clogged. Clean the pump filter Your Machine isn’t taking in Water The clothes aren’t placed evenly in the drum. Spread the clothes inside the machine more evenly. Your Washing Machine’s feet aren’t adjusted properly. Adjust the feet. Your Machine is vibrating You haven’t removed the transportation screws. Remove the transportation screws.

You haven’t put enough clothes in the drum You Washing machine’s operation is unaffected. You have put too many clothes in the drum Don’t put too many clothes in the machine. Spread your clothes more evenly. Your Washing Machine is vibrating Your machine is resting against a rigid object, Make sure your Washing Machine isn’t leaning against a hard or rigid object. Excessive foam in the Detergent Drawer You’ve put in too much detergent. Press the ‘START/PAUSE’ button. To prevent frothing, dilute one tablespoon of softener in a half-litre of water & pour it into the detergent drawer. Press the ‘START/PAUSE’ button after 5-10 minutes. Put the correct amount of detergent in the next wash. Wrong detergent has been used Only use detergents for automatic Washing Machines. Your laundry was too dirty for the program you selected Select a suitable program. (see the tables on pp. 12-13) You didn’t use enough detergent Use more detergent according to the detergent packaging. Washing is still dirty Too many clothes were put machine. Don’t put as many clothes in your next wash-load.

The Water drains from your Washing Machine as soon as it has filled. The end of the water drain hose is in too low a position for the machine. Place the water drain hose at a better height. No water seen in the drum during the washing cycle. Nothing wrong – the water is in the lower part of the drum. You don’t need to do anything. Detergent residue shows up on clothes Pieces of some detergents that do not dissolve in water may stick to your clothes. Set your Washing Machine to a ‘Rinsing Cycle’ to get rid of the stains. Brush off residue powder with a brush when dry. Grey stains show up on the clothes These stains may be the result of oil, cream or ointment. In the next washing, use the maximum detergent amount declared by the detergent manufacturer. The Spinning Cycle is not done or starts only after a delay Nothing wrong. Your Washing Machine has an unbalanced load control system that will try to distribute your clothes evenly. After your clothes have been distributed more evenly, the spinning process will begin. For the next washing cycle, place your clothes more evenly.

Err 01 The ‘START/ PAUSE’ light blinks The door is not shut properly. Shut the door properly so that it ‘clicks’. If there is still a problem, turn off the machine, unplug and call the nearest authorized service centre immediately. Err 02 The PROGRAM Ready light blinks The Water level in your machine is below the heater. Your water supply’s pressure may either be too low or is locking. Turn on the tap. There may be no water pressure so check if there is or not. If there is still a problem, your machine will automatically stop after a while. Unplug your machine, turn off the tap and apply to the nearest authorized service centre. Err 03 The ‘START/ PAUSE’ light and program ready light blinks. The pump has failed or the pump filter has been obstructed. Clean the pump filter. If the problem persists, report it to your nearest authorized service centre. Err 04 The PROGRAM END light is blinking There is too much water in your machine. Your machine will automatically drain the water. After your machine has completed the draining process, shut down your machine and unplug it. Close the tap and report it to the nearest authorized service centre.

Err 05 The START/ PAUSE light and PROGRAM END lights are blinking. The Heater in your machine or the heat sensor has failed. Shut down your machine and unplug. Turn off your tape and report it to the nearest authorized service center. Err 06 The PROGRAM READY light and PROGRAM END lights are blinking. The Motor has failed. Shut down your machine and unplug. Turn off the tap and call your nearest authorized service center. Err 07 The START/ PAUSE light, PROGRAM READY light and PROGRAM END lights are blinking. The Motor has failed. Shut down your machine and unplug it. Turn off the water tap and call your nearest authorized service centre. Err 08 The PROGRAM READY Light and PROGRAM END lights stay on. Your voltage is too high or too low. If the network (local voltage) is lower than 150V or higher than 260V, your machine will auto- matically stop. When the network voltage recovers, your machine will resume working.

* PLEASE NOTE THAT FAILURE TO REMOVE THE TRANSPORTATION SCREWS WILL RESULT IN YOUR GUARANTEE BECOMING VOID! * o THE TRANSPORTATION SCREWS, WHICH CAN BE FOUND AT THE REAR OF YOUR WASHING MACHINE, MUST BE TAKEN OFF BEFORE YOU CAN USE YOUR MACHINE. o HOW TO REMOVE THESE SCREWS: 1) LOOSEN THE SCREWS BY ROTATING ANTICLOCKWISE WITH A SUITABLE WRENCH (DIAGRAM-1). 2) REMOVE THE SCREWS BY PULLING THEM (DIAGRAM-2). 3) THE PLASTIC PARTS FOUND IN THE INTERIOR OF YOUR WASHING MACHINE WILL FALL DOWN UNDER THE DEVICE. 4) LIFT YOUR MACHINE UP SLIGHTLY, PICKING UP THE PLASTIC PARTS. IF THERE ARE STILL SOME THAT HAVE NOT FALLEN DOWN, OPEN YOUR MACHINE’S DOOR AND MOVE THE DRUM WITH YOUR HAND TO MAKE THE REMAINING PARTS FALL DOWN. COLLECT THE PARTS THAT HAVE FALLEN TO THE FLOOR. 5) INSERT THE PLASTIC TRANSPORTATION SCREW CAPS (THESE CAN BE FOUND INSIDE THE ACCESSORIES BAG) IN THE HOLES WHERE THE TRANSPORTATION SCREWS HAD BEEN (DIAGRAM-3). 6) KEEP THE TRANSPORTATION SCEWS AFTER YOU HAVE REMOVED THEM FROM THE MACHINE – YOU MAY NEED THEM SHOULD YOU MOVE HOME IN THE FUTURE. _____________________________________________________________________________ ADJUSTING THE FEET o DO NOT INSTALL YOUR MACHINE ON RUGS OR CARPETS. o FOR YOUR WASHING MACHINE TO WORK SILENTLY & WITHOUT ANY VIBRATION, YOU SHOULD POSITION IT ON FLAT, NON- SLIPPERY & TOUGH GROUND. o YOU CAN ADJUST YOUR WASHING MACHINE’S LEVEL BY TURNING ITS FEET EITHER UPWARDS OR DOWNWARDS (PLEASE SEE DIAGRAM ON NEXT PAGE).

2) AFTER YOU’VE REACHED THE LEVEL YOU WANT, TIGHTEN THE PLASTIC ADJUSTMENT NUTS AGAIN BY ROTATING THEM UPWARDS (ONE FOR EACH FOOT). 3) NEVER PUT CARTONS, WOODEN BLOCKS OR SIMILAR MATERIALS UNDER THE MACHINE TO HELP MAKE IT LEVEL TO THE GROUND. _________________________________________________________ ELECTRICAL CONNECTION YOUR WASHING MACHINE WORKS ON 220-240V & 50 Hz. IT COMES WITH ITS OWN SPECIALLY MOULDED, EARTHED PLUG THAT HAS BEEN ATTACHED TO THE POWER CABLE OF YOUR WASHING MACHINE. The plug must be inserted to an earthed socket with 10 ampere. The fuse used in your plug must also be 10Amps. Should your electricity supply not match these specifications, you should contact a qualified electrician to accommodate this. *WARNING! (PLEASE NOTE) Baumatic Ltd are not responsible for any damages arising out of usage following failure to earth (ground) your appliance. CONNECTING TO THE WATER MAINS • Depending on your appliance’s features, it may operate with a single water inlet (cold) or a double water inlet (hot/cold). THE WHITE-HEADED HOSE IS FOR THE COLD WATER INLET / THE RED-HEADED HOSE IS FOR THE HOT WATER INLET (but ONLY for machines with a double water inlet system). • To prevent leakage from the connection joints, a seal (for machines with cold water inlet only) or seals (for machines with hot & cold water inlets) are included in the hose packing. Fit these seals at the end of the water inlet hoses on the tap side. 1) Connect the WHITE-HEADED HOSE to the WATER INLET VALVE with the white filter & connect the RED-HEADED HOSE to the WATER INLET VALVE with the red filer (this is only applicable to machines with double inlet systems). 2) Tighten the plastic parts of the connections with your hand. Please call a qualified plumber to ensure safer connections.

friendly and can be recycled. o Please discard all packaging material with due regard for the environment.

Dear Customer, Your new Baumatic appliance comes complete with a free 12 month guarantee covering both parts and labour costs resulting from defective materials or workmanship. Baumatic also gives you the opportunity to automatically extend the guarantee period for a further 12 months at no extra cost, giving an initial guarantee period of 24 months. The extended guarantee period applies to England, Scotland, Wales and Northern Ireland only. To qualify for your full 24 months guarantee you must register your appliance within 28 days of purchase to be covered under this guarantee. This can be done online via: www.baumatic.co.uk or through returning the guarantee card which can be found in each new Baumatic appliance. * In addition, your appliance is covered by a 5 year parts warranty. Baumatic Ltd will provide free of charge the parts required to repair the appliance, only if they are fitted by a Baumatic engineer, for any defect that arises due to faulty materials or workmanship within a period of 5 years from the original purchase date. * An additional 1 to 3 year insurance scheme for labour is available should you wish to extend the warranty period. Should any person other than an authorised representative of Baumatic Ltd interfere with the appliance, the policy is negated and Baumatic Ltd will be under no further liability. The guarantee covers the appliance for normal domestic use only, unless otherwise stated. Any claims made under the terms of the guarantee must be supported by the original invoice/bill of sale issued at the time of purchase. This guarantee is transferable only with the written consent of Baumatic Ltd. If the appliance fails and is considered either not repairable or uneconomical to repair between 12 months (2 years if registered) and five years, a free of charge replacement will not be offered. The guarantee for any replacement will only be for the remainder of the guarantee on the original product purchased. The guarantee does not cover: - Sinks and taps - Failure to comply with the manufacturers instructions for use. - The replacement of cosmetic components of accessories - Accidental damage or wilful abuse. - Subsequent loss or damage owing to the failure of the appliance or electrical supply - Incorrect installation - Losses caused by Acts of God, civil war, failure to obtain spare parts, strikes or lockouts - Filters, fuses, light bulbs, external hoses, damage to bodywork, paintwork, plastic items, covers, baskets, trays, shelves, burner bases, burner caps, decals, corrosion, rubber seals. In the course of the work carried out it may be necessary to remove the appliance from it operating position. Whilst all reasonable care will be taken, Baumatic Ltd cannot accept responsibility for damage sustained to any property whatsoever in this process. This guarantee is in addition to and does not diminish your statutory or legal rights. Contacting Baumatic Ltd Sales Service Spares Technical/Advice TEL: 0118 933 6900 TEL: 0118 933 6911 TEL: 0118 933 6922 0118 933 6933 FAX: 0118 931 0035 FAX: 0118 986 9124 FAX: 0118 933 6942 0118 933 6942 For ROI (Republic of Ireland), please contact one of the numbers below: TEL: 01 – 6266798 FAX: 01 - 6266634 Thanks you for buying Baumatic. * Applies to UK, Scotland, Wales & Northern Ireland only (Republic of Ireland has 1 year labour & 1 year parts warranty only)

Reading, Berkshire RG2 0QX, United Kingdom Sales Telephone +44 118 933 6900 Sales Fax +44 118 931 0035 Service Telephone +44 118 933 6911 Service Fax +44 118 986 9124 Spares Telephone +44 118 933 6922 Technical / Advice Telephone +44 118 933 6933 E-mail: [email protected] [email protected] Http (Internet site): www.baumatic.com