Leckey firefly Scooot Operation & User’s Manual

Fitting the Advanced Backrest Cushion on to your Scooot Seat Remove the plastic backrest from your Scooot seat and slide the Advanced Backrest Cushion on to the backrest.* *See Section 9.2 of your Scooot User Guide for additional guidance on how to remove the plastic backrest. *See Section 9.2 of your Scooot User Guide for additional guidance on how to secure the backrest using 2x M6 x 20mm screws and 4x M6 washers. Ensure the Advanced Backrest Cushion is fitted securely by closing the Velcro strips over on both sides. Hold the backrest and base together and turn the Scooot Seat over. Secure the backrest to the base using the same screws and washers suggested in the User Guide.* Your Advanced Backrest should now be secure and ready to use. Once fitted, place the Advanced Backrest unit in to the main Scooot base as pictured above. 1 3 5 6 2 4 all-guides com

Cushion is detachable when the cushion is not attached to the plastic Scooot backrest. Remove the lateral from the Advanced Backrest Cushion by un-popping both popper buttons on the cushion. Slide the lateral out of the backrest cushion by pulling it to the right. To attach the backrest cushion on to the plastic Scooot backrest, ensure both Velcro strips are closed over securely. Hold the backrest and base together and turn the Scooot Seat over. Secure the backrest to the base using the same screws and washers suggested in the User Guide.* *See Section 9.2 of your Scooot User Guide for additional guidance on how to secure the backrest using 2x M6 x 20mm screws and 4x M6 washers. The backrest cushion and lateral should now be separated. To re-join the two parts, simply reverse the previous two steps. 1 3 5 6 2 4 LS570-02 Removing the lateral support from the Advanced Backrest Cushion