Becker BE A00 Operating Manual

position as the start point for route guidance. The individual stages are calculated. A map of the stages will then be displayed. > Press the Start button to start guidance for this route. You can call up the route options using the Options button. Simulation of the route There is a play button on the left under the map, used to start a simulation of the route. If you touch the display after starting, a control bar is displayed at the top with control buttons for the simulation. You can pause the simulation w ...

displayed (maximum permitted speed, alcohol limits, etc.). Below you will find a description of the symbols used: Press the OK button or the button to exit the menu. Blocking a section of the road permanently With the Block option you can block indi- vidual route sections permanently. The Navigation device then calcu-lates a di- version to avoid a traffic obstruction. Furthermore, existing blockages can be removed (with the Delete block- age button) or be displayed on a map . > Press the Block button. A map of the vicinit ...

GPS reception is available, will show your current position. If route guidance is already active, the map will be displayed with route guidance. Structure of the map display The structure depends on the settings made in "Map display options" on page 99 or in "The Map view button" on page 64 and whether route guidance is active or not. Map display without route guidance If the navigation is not active, almost the whole area of the touch screen will be taken up by the map. Speed limit on the road currently being ...

models) From the telephone menu, you have the option: • Numbers to be dialled or selected from the phonebook, • Text messages (SMS) to be displayed, edited and read out, • To call up number lists • To search for Buetooth telephones • To disconnect the connection to a cell phone. If Bluetooth is activated and the Navigation device is already connected to a cell phone, the telephone menu is displayed after the telephone function is called up. In the upper area of the telephone menu, the signal strength of the ce ...

and the product. In case of non-observance, the product or the charger may be damaged, or the battery may explode. • Do not open the product or the battery under any circumstances. No modifications of the product are permitted, any such modification leads to the loss of the operating permission. • Only use original BECKER accessories. This way it is ensured that all relevant provisions will be met and that health risk ...

switch Bluetooth on or off. > In the settings menu, press the Bluetooth button. Hands free With the Hands free button, you can switch the supported telephone func- tions on or off. Data connection (model dependent) With the Data connection button you can enable your telephone for data transmission of the Becker Link2Live services. Selecting both options simultaneously can sometimes cause restrictions in hands free mode or during data trans- mission. The prerequisite for using Becker Live services is Suppo ...

Using the Block road ahead option, you can block a stretch of road ahead temporarily. This determines a certain stretch of road that should not be used. The Navigation device will now try to calculate a detour. > Call up the options menu for the map display. > Press the Block the road ahead button. > Select the length of block you want by pressing the arrow buttons. If route guidance is active, you can select a road length between 200 m and 50 km. As soon as you selected the stretch, a new route will be calculated. Further ...