Oypla 3822 Operation & User’s Manual
Text of the manual
• This product is not a toy, and is only to be used for its designated purpose.
• Never carry out any alterations or modifications to this product.
• This product is intended for indoor use only.
• Make sure that you place the product on the floor, placing it on a high surface
creates the risk of a falling hazard and could injure you and/or your pet.
• Before allowing your pet to use the product, make sure all fastenings are tightly
in place and that everything is in order, and checked periodically by an adult.
• Do not attempt to move the product if there is a pet inside.
• Clean only with a damp cloth. Do not use strong industrial cleaning substances or
abrasive materials as these will damage the product.
• If the product is damaged or has any defects, please contact [email protected]
USER MANUAL Model No: 3822
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold on
this condition, which no representative of the company can waive or change.
USER MANUAL Model No: 3822
Operating Instructions
Parts List:
If you are missing any of the below parts please contact [email protected]
Please be aware that you will be referring to this parts list throughout the assembly
process.
USER MANUAL Model No: 3822
1. Place the base with housing block onto a flat surface, ensuring that the base is stable. Once done, push
a screw through both of the locations marked on the diagram above. Make sure that the screws are able
to go all the way through.
2. Screw a support pole onto each of the exposed screws, ensuring that the support poles are secured
correctly.
3. Screw the platform with the outreaching ball onto the lower support pole (the one that is attached
directly to the base). After this, screw the platform with the soft mouse toy onto the upper support pole
(the one that is attached to the roof of the housing block). Once done, check that everything is secure
and screwed in correctly.
Please retain a copy of all instructions for future consultation.
Imported into the EU by Oypla.com LLP, Uxbridge, UB8 2FX