Luma Surveillance 310 Series Installation & Operation Manual

4. Align the teeth on the weatherproof endcap � with the gaps on the camera’s network interface socket �, then insert the socket into the endcap. Twist until they click into position (the O-ring � gives you a little flexibility while still weatherproofing the connection). 5. Slide the thick rubber gasket � into the weatherproof endcap �, and secure it by screwing the lock nut � tightly onto the endcap �. � � � ...

Weatherproofing the PoE Cable 1. Slide the unterminated cable � through the lock nut �, the thick rubber gasket �, and the weatherproof endcap � as shown. Ensure the notched side of the rubber gasket � faces the endcap, as shown. Terminate the cable � with a network plug �. 2. Place the O-ring � onto the end of the camera’s network interface socket � with the flat side toward the camera. Push it past the locking teeth as far as it easily goes. 3. Connect the RJ45 plug � to the camera’s network socket �. � � � � ...

Installation Without an NVR If you are using this camera on a netowkr and not using an NVR, use the Luma Utility to locate your camera and set it up. Visit your product page at SnapAV.com and download the Luma Utility installer from the Support tab. You must use v3.0.0.53 build 20170426 or later! Earlier versions of the utility will not work! Run the installer, accepting all defaults. Pre-Installation Camera Configuration You’ll find it easiest to connect the camera directly to your PC, making most adjustments to the camera from the convenience of your tab ...

Weatherproofing the PoE Cable 1. Slide the unterminated cable � through the lock nut �, the thick rubber gasket �, and the weatherproof endcap � as shown. Ensure the notched side of the rubber gasket � faces the endcap, as shown. Terminate the cable � with a network plug �. 2. Place the O-ring � onto the end of the camera’s network interface socket � with the flat side toward the camera. Push it past the locking teeth as far as it easily goes. 3. Connect the RJ45 plug � to the camera’s network socket �. � � � � ...

Read this before you go on site! Install your camera with a connection to the Internet via your NVR or through a network router. This allows you to use OvrC, a powerful remote maintenance tool (see OvrC.com) and lets you use the Luma Surveillance mobile app to check on the camera from anywhere. For installation using this guide, you must be able to access this camera through a personal computer. If your surveillance system is not on a network, you’ll have to use the NVR’s local interface for installation. See the NVR user’s manual for details. The web ...

4. Align the teeth on the weatherproof endcap � with the gaps on the camera’s network interface socket �, then insert the socket into the endcap. Twist until they click into position (the O-ring � gives you a little flexibility while still weatherproofing the connection). 5. Slide the thick rubber gasket � into the weatherproof endcap �, and secure it by screwing the lock nut � tightly onto the endcap �. � � � ...