Logitech RALLY PLUS Setup Manual

Magyar 101 Česká verze 108 Slovenčina 115 Українська 122 Eesti 129 Latviski 136 Lietuvių 143 Български 150 Hrvatski 157 Srpski 164 Slovenščina 171 Română 178 Türkçe 185 192 ةيبرعلا 199 תירבע1. Power 2. Mic Pod 3. Future Expansion 4. Connection To Display Hub 5. HDMI 1 In 6. HDMI 2 In 7. Meeting Room Computer USB 8. Future Expansion 9. Security Slot 10. Power LED WHAT’S WHAT TABLE HUB 10 9 1 2 3 4 5 6 7 8

4. HDMI 1 Out 5. HDMI 2 Out 6. Meeting Room Computer USB 7. Camera 8. Security Slot 9. Remote Control Pairing 10. Power LED DISPLAY HUB 10 9 8 1 2 3 4 5 6 7 CAMERA 1 2 4 5 6 7 3 1. Remote control pairing button 2. USB 3. Status LED 4. Security slot 5. MIPI 6. Tripod Thread 7. Expansion Slot

THE DEFAULT DEVICE Ensure that RALLY PLUS is chosen as the camera, speaker and microphone in your video conferencing applications Please consult the application documentation for further instructions on how to do this STARTING A VIDEO CALL After installing RALLY PLUS and ensuring it is the default device in your video conferencing application, simply start the application in the normal manner and enjoy the benefits of improved audio and video PAIRING RALLY PLUS TO A BLUETOOTH DEVICE You can use RALLY PLUS for audio calls when paired to a Bluetooth device To pair your Bluetooth device to RALLY PLUS, follow these simple step: 1. Press and hold the Bluetooth button on the remote control until you see a flashing blue light on the camera and microphones 2. Place your mobile device in Bluetooth pairing mode and select “Logitech Rally” 3. You are now ready to use RALLY PLUS for audio calls REMOTE 5 7 6 8 9 2 3 1 4 1. Bluetooth pairing 2. Call answer 3. Call end 4. Microphone mute 5. Zoom in/out 6. Volume up/down 7. Home 8. Camera pan/tilt 9. Camera presets After completing the installation, the system can be checked by running the diagnostic application available at Logitech com/support/Rally

ease installation and allow RALLY PLUS to be used in larger rooms: 1. Rally Mounting Kit: Mounting brackets for the Table Hub, Display Hub, Camera and Speakers 2. Extra Mic Pods: RALLY PLUS can support up to 7 Mic Pods allowing great flexibility in room size and configuration 3. Mic Pod Hub: Used to branch microphone routing and run most of the Mic Pod cabling is below the table The Mic Pod Hub has 3 jacks that can be connected to a combination of Mic Pods or other Mic Pod Hubs 4. TV mount: Works with one of either the Camera or Speaker mounting brackets The TV Mount can be used in pairs to mount the Camera and Speaker above and below the TV FOR MORE INFORMATION You can find additional information on RALLY PLUS including: - FAQs - Software to enable functions in various application - How to order replacement parts and more at www logitech com/support/Rally PAIRING A REMOTE CONTROL TO RALLY PLUS RALLY PLUS and the remote control are paired at the factory You can pair up to 5 remote controls to RALLY PLUS to make it easier to control the system in larger rooms Or, if you need to pair a remote to the camera, such as when replacing a lost remote, do the following: 1. Press and hold button on the back of the camera until the LED flashes blue 2. Press and hold the Bluetooth button on the remote for 10 seconds to place it in pairing mode 3. Once the remote and camera are paired the LED will stop flashing 4. If the pairing fails, the LEDs will keep flashing Start from step 2 and repeat 5. Press and hold the pairing button on the Display Hub until the LED flashes white 6. Press and hold the Bluetooth button on the remote for 10 seconds to place it in pairing mode 7. Once the Display Hub and camera are paired the LED will stop flashing 8. If the pairing fails, the LEDs will keep flashing for 2 minutes then stop Start from step 2 and repeat CAMERA SETTINGS APPLICATION Use this program to control the camera pan, tilt, zoom, focus, and image quality (like brightness and contrast) from your computer The software can be downloaded from www logitech com/ support/Rally