Infinite Peripherals Infinea X Quick Start Manual

GETTING STARTED QUICK START GUIDE INFINEA® X Charging Station (1-Unit) iPod 6, iPhone SE & iPhone 7 1. Place the charging station on a sturdy, clean and dry surface in an open, well-ventilated area away from direct sunlight. 2. Gently insert the bottom of the device into the charging cup, ensuring the unit is seated upright so that proper contact is made with the charging pins (Fig. 1). 3. Plug USB (Fig. 2) connector end of Infinea X Charging Station into an appropriate power supply (5.2V 2.4A, not included). 4. Confirm the Infinea X LED indicator turns green to indicate charging is active. 5. On the charging station, pull the device straight up and out of the charging bay. PRODUCT SPECIFICATIONS Mechanical Compatibility Infinea X with iPod 6, iPhone SE, or iPhone 7 Infinea X with iPhone 7 Weight 450g (15.9 oz.) 460g (16.2 oz.) Dimensions 121 mm x 106.3 mm x 54.5 mm (4.8” x 4.2” x 2.15”) 121 mm x 106.3 mm x 61.4 mm (4.8” x 4.2” x 2.4”) Cable Length 3’ (914.4 mm) Electrical Connector USB A Input 5V 2.1A DC (Minimum) Environmental Operating Temperature 0°F to 35°F (32°C to 95°C) Storage Temperature -20°F to 45°F (-4°C to 113°C) Relative Humidity 5% to 95% Non-Condensing 1 2

Infinea X Charging Station (1-Unit). Please visit our website at ipcmobile.com, or contact your Infinite Peripherals account representative, for additional information about our current and future product accessory offerings. Note: iOS device and other additional items shown on cover page may not be included. ACCESSORIES Mobility Sales/Technical Center Infinite Peripherals, Inc. 17681 Mitchell N Irvine, CA 92614 Toll-Free: (866) 278-7860 Office: (949) 222-0300 Headquarters/Main Warehouse Infinite Peripherals, Inc. 2312 Touhy Avenue Elk Grove Village, IL 60004 Toll-Free: (800) 278-7860 Office: (847) 818-1260 Fax: (847) 818-1287 Specifications subject to change without notice. Infinite Peripherals, Mobilize Your Enterprise, Linea Pro, Infinea, Infinea Tab and Infinea Omni are trademarks of Infinite Peripherals, Inc. All other trademarks are the property of their respective owners. Technical Support Infinite Peripherals, Inc. 17681 Mitchell N Irvine, CA 92614 Toll-Free: (866) 278-7860 Office: (949) 222-0300 Email [email protected] Website ipcmobile.com • Note: Box contents and part numbers may vary based on order configuration. Infinite Peripherals (IPC) does not warrant, and is not responsible for, any damage to the Infinea X for iPhone 7 Charging Station (“Product”) as a result of liquid or solid particle intrusion into the Product or damage caused by dropping the Product. If a material or workmanship defect arises with regard to any IPC product, and a valid claim is received within the Warranty Period, IPC (at IPC’s sole discretion) will (1) repair the Product using new or refurbished parts, or (2) replace the Product with a new or refurbished Product. For purposes of this limited warranty, “refurbished” means a product or part that has been substantially returned to its original specifications. In the event of a defect, these are your exclusive remedies. QSG-10038 Rev. A WARNINGS & CAUTIONS Please observe the following precautions: • Keep the charger away from liquids. Do not immerse the charger in water. • The charger is intended for Indoor use only. When not in use, place the charger in a cool, dry place. • Do not place the charger near a heat source. Keep both the power supply and charger away from direct sunlight and/or heat. • Device should only be repaired by IPC or an authorized service facility. • Do not use any USB connector other than the one provided with this charger. The use of any other USB connector may damage the charger and will void the warranty. WARRANTY TROUBLESHOOTING PRODUCT RETURNS Use the link provided to create an account and gain access to our Knowledge Base and online support services. Through our online support center, you’ll be able to download files, open a Support Ticket, manage your RMAs, view your account Profile and subscribe to Alerts. To request a RMA: 1. Create a user account in the RMA Support Portal at http://ipcmobile.com/support/ rma/ 2. Login to your user account and click the Create RMA Request option. 3. Read the instructions provided and complete the online request form. 4. Note the assigned RMA number and write it clearly on your shipping carton. 5. Ship your equipment back to us at the address provided. ADDITIONAL INFORMATION Please contact your Infinite Peripherals sales representative for technical specifications and additional product documentation. No LED illuminated on Infinea X. • The USB connector is not properly connected. • The Infinea X is not seated properly in the charging bay. The LED is illuminated on the Infinea X upon installation but then turns off. • Faulty charging cup. • Faulty device.