Inficon IRwin Methan Leak Detector Quick Start Manual

(for a factory set unit) QUICK START GUIDE 1 of 3 1 Make sure your IRwin is set in Universal Mode (see the How to set your IRwin for Universal Mode quick start guide) Select Function Test and press 2 3 4 5 Press followed by Press to perform a function test with GC Mix 1.0% CH4 50ppm C2H6 1000ppm C3H8 mimd66en1-03 (1910) Press . Use to select GC in the drop-down menu, press

6 Press to start the Function Test for GC 7 Expose the instrument to GC gas mix (GC mix 1.0% CH4 50ppm C2H6 1000ppm C3H8) 8 The Function Test is in progress 9 Expose both probe and instrument to fresh air 2 of 3 10 The GC Analysis is in progress mimd66en1-03 (1910)

All trademarks are the property of the ir respective owners. ©2019 INFICON mimd66en1-03 (1910) How to Perform GC Function Test on IRwin Methane Leak Detector 11 The Function Test is successfully completed when the graph shows detection of methane, ethane and propane 12 A successful test will be confirmed by a green, ticked circle. You can also save the GC report. Use IRwin App to transfer your saved log files to your computer and create pdf file of the test. IRwin App is available on www.inficon.com 13 IRwin SXG S/N: 92001853 S/W ver: 3.06.01 Function Test Result GC 10/10/2019 13:46:53 60s 120s 180s 45B Westmansgatan Gas Concentration 1.6 % CH4 (Methane) C2H6 (Ethane) C3H8 (Propane) Address Signature/Department Comments www.inficon.com v3.21 003 012 12.8