IME Kerlink Wirnet iStation Series Quick Start Manual

• The screws for mounting on a wall are not included, the diameter of the screws must be 6mm. • The covers have to be screwed at their maximum to ensure waterthightness (USIM and LED/buttons) © Copyright photo - Kerlink - all right reserved 5 Markings Symbol Description Symbol Description Wirnet iStation Type of Equipment QR code www.ime.de ime mobile solutions GmbH • Borsigstraße 7-9 • D-93092 Barbing • +49 9401 9333-0 • [email protected] • www.ime.de 04-12-19 ...

7.1 Wirnet™ iStation 868 Simplified EU Declaration of Conformity Hereby, Kerlink, declares that the radio equipment type Wirnet™ iStation 868 is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.kerlink.com/support In Europe, the Wirnet™ iStation 868 station must comply with the ERC 70-03 requirements regarding duty cycle and maximum EIRP. They are summarized in the following table ERC 70-03 Frequency (MHz) Power Duty Cycle h5 865-868 14dBm ERP 1% h6 868-868,6 14dBm ER ...

04-12-19 ...

• In order to provide the most updated technical documentation, as well as considering and saving the environmental resources, Kerlink is providing preferably “Online documentation”. • Kerlink is gathering all the technical information on a Wiki: http://wikikerlink.fr/ - If your don’t have yet your Wiki login/password please request them to [email protected] (note that the“Product ID” of one of your products will be required). - How to find the “Product ID”? Please look at the Wirnet iStation sticker placed on the right side of the case. • On the Wiki, Kerli ...

Before setting all connections, ensure that the power supply is not connected to the mains supply. GNSS, 3G/4G and LoRa antenna are integrated. An external optionnal LoRa antenna can be added by opening the n°3 (please refer on the chart page 3) button and then screw the antenna directly or via a cable. Once the Wirnet™ iStation is installed, you can select up to 2 technologies to set up the access to Internet for the data backhaul: • Ethernet connection, requiring an Ethernet access through a dedicated RJ45 cable (not included) • 3G/4G cellular connection, requi ...

 AN-KLK03355 - Improving radio coexistence performance of LoRaWAN gateways  AN-KLK03356 - LoRaWAN gateways coverage optimization  AN-KLK03357 - LoRaWAN gateways installation recommendations  AN-KLK03358 - LoRaWAN gateways lightning protection • For any Warranty or Maintenance related request (Trouble shooting, help …),  If purchased from a Distributor, please contact the distributor directly for Level1 support  If purchased from Kerlink directly, please open an “Assista ...

Before setting all connections, ensure that the power supply is not connected to the mains supply. GNSS, 3G/4G and LoRa antenna are integrated. An external optionnal LoRa antenna can be added by opening the n°3 (please refer on the chart page 3) button and then screw the antenna directly or via a cable. Once the Wirnet™ iStation is installed, you can select up to 2 technologies to set up the access to Internet for the data backhaul: • Ethernet connection, requiring an Ethernet access through a dedicated RJ45 cable (not included) • 3G/4G cellular connection, requi ...

7.1 Wirnet™ iStation 868 Simplified EU Declaration of Conformity Hereby, Kerlink, declares that the radio equipment type Wirnet™ iStation 868 is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.kerlink.com/support In Europe, the Wirnet™ iStation 868 station must comply with the ERC 70-03 requirements regarding duty cycle and maximum EIRP. They are summarized in the following table ERC 70-03 Frequency (MHz) Power Duty Cycle h5 865-868 14dBm ERP 1% h6 868-868,6 14dBm ER ...