Haws 1109FR Installation, Operation & Maintenance Instructions

1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424 E-mail: [email protected] website: www.hawsco.com No. 0002076626 (14) Model 1109FR Drinking Fountain INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS LIMITED WARRANTY HAWS warrants that this specific product is guaranteed against defective material or poor workmanship for a period of one year from date of shipment. HAWS liability under this warranty shall be discharged by furnishing without charge F.O.B. HAWS Factory any goods, or part thereof, which shall appear to the Company upon inspection to be of defective material or not of first class workmanship, provided that claim is made in writing to Haws within a reasonable period after receipt of the product. Where claims for defects are made, the defective part or parts shall be delivered to the Company, prepaid, for inspection. HAWS will not be liable for the cost of repairs, alterations or replacements, or for any expense connected therewith made by the owner or his agents, except upon written authority from HAWS, Sparks, Nevada. HAWS will not be liable for any damages caused by defective materials or poor workmanship, except for replacements, as provided above. Buyer agrees that HAWS shall not be liable for general, special, or consequential damages claimed to arise under the contract of sale. The drinking fountain manufactured by HAWS is warranted to function if installation and maintenance instructions provided are adhered to. The units also must be used for the purpose for which they were intended. NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED, PROVIDED OR GIVEN BY HAWS. NOTE TO INSTALLER: Please leave this information with the Maintenance Department. SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS MODEL PLEASE CALL: TECHNICAL SUPPORT: 1-800-766-5612 FOR CUSTOMER SERVICE: 1-888-640-4297

RECOMMENDED TOOLS: Hack saw, pipe joint sealant, screwdriver, level, 12" adjustable wrench, 10" pipe wrench, 5/64“ hex key wrench, 9/16”, 1/2", 7/16” socket wrench or open end wrench. LOCATION OF UNIT: The Model 1109FR Drinking Fountain is a wheelchair accessible drinking water facility. The height dimensions shown, meet current ADA requirements. When installing this unit, local, state or federal codes should be adhered to. If height other than shown is required, then dimensions must be adjusted accordingly. SUPPLY LINE: The minimum recommended line size is 1/2“IPS with 30-90 psi (2-6 ATM) flowing pressure. Where sediment or mineral content is a problem, an inlet filter is recommended. PLUMBING CONNECTIONS: Waste outlet is 1-1/4” IPS (located on 6521FR Valve box). MAINTENANCE: Periodically clean the strainer. Refer to 6521FR Valve Operation and Maintenance Sheet for more information. TROUBLESHOOTING PROBLEM REPAIR CHECKLIST 1. Insufficient bubbler flow. 1a. Check that inlet screwdriver stop valve is wide open. (Customer supplied). Turn counterclockwise. b. Verify minimum 30psi flowing supply pressure. c. Adjust valve to increase flow. Use front adjust screw see 6521FR Valve Manual. General Notes: Before tightening nut and ferrule assembly, push tubing into fitting until it bottoms out to ensure correct engagement with O-Ring. For more information about Haws products, see our website: www.hawsco.com © Haws® Corporation – All Rights Reserved HAWS® and other trademarks used in these materials are the exclusive property of Haws Corporation.

BOTTOM PLATE FREEZE RESISTANT VALVE DETAIL OF ITEM 2 ROTATED 90° INTO VIEW DETAIL A A 6521FR PBM1109 5881PBA 5703M BP3 APPROVED DRAWN PART NUMBER SCALE: SHEET OF REVISION DRAWING TYPE: SIZE: A BY ECN NO. PAGE DATE DATE ECN: REVISED PER CHKD Haws Corporation - All Rights Reserved HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation. C R MODEL(S) 1455 KLEPPE LANE SPARKS, NEVADA 89431 (775) 359-4712 FAX (775) 359-7424 E-MAIL: [email protected] WEBSITE: WWW.HAWSCO.COM ITEM DESCRIPTION THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE. WHEN ORDERING PARTS PLEASE SPECIFY MODEL NUMBER. PART NO. FV 06-08-98 14 0002076626 1109FR 1:4 1 1 IR 04/16/19 . DP 3 OF 4 PARTS BREAKDOWN 5387 2019 FV ENSURE TUBE IS DISCONNECTED FROM "PUSH-IN" TYPE CONNECTOR ON PRESSURE REGULATOR PRIOR TO REMOVAL. APPLY A DROP OF LOCTITE 222MS ON NOZZLE THREADS PRIOR TO REASSEMBLING BACK ONTO BUBBLER HEAD. REATTACH TUBE TO "PUSH-IN" TYPE CONNECTOR ENSURING IT IS FULLY BOTTOMED OUT. 1 NOTE: REMOVE INSERT WITH 5/16 HEX SOCKET (NOT SUPPLIED) 1

SLIP JOINT NUT AND WASHER (FROM DRINKING FOUNTAIN) 1-1/4" IPS NIPPLE (NOT SUPPLIED) 1-1/4 NPT (F) ELBOW TO TRAP SUPPLY 9" 229mm 15" 381mm BACK PANEL OPTIONAL ON 1109FR 1/2" 12.7mm (W/OPT. BACK PANEL) 76mm 3" 3" 76mm SUPPLY AIR LINE (TO SPOUT OUTLET) DIMENSIONS MARKED (*) MUST BE ADJUSTED INSTALLATION HEIGHTS OTHER THAN SHOWN, FEDERAL CODES SHOULD BE ADHERED TO. FOR WHEN INSTALLING THIS UNIT LOCAL, STATE OR HOLD ROUGH-IN DIMENSIONS ± 1/4" (6.4mm). * ACCORDINGLY. 3/8 OD VINYL SUPPLY TUBING (CONNECT TO BUBBLER WITH SUPPLIED UNION, TRIM TO FIT) 7/8 OD INSULATING TUBING (MUST COVER ENTIRE SUPPLY TUBING, FROM BUBBLER TO MODEL 6521FR FREEZE VALVE ASSEMBLY,TRIM TO FIT) 6521FR FREEZE RESISTANT VALVE ASSEMBLY 1-1/4" O.D. X 7 1/2 LG." WASTE ARM (SUPPLIED) 6521 VALVE ASSEMBLY ACCESS PANEL THIS FOUNTAIN REQUIRES THE USE OF MODEL 6521FR FREEZE RESISTANT VALVE ASSEMBLY (SOLD SEPARATELY) 1 VALVE ASSEMBLY MUST BE INSTALLED IN A WARM AREA. PROVISIONS SHOULD BE MADE TO ALLOW ACCESS TO ACCESS PANEL 2 4. 3. 2 2 1 3/8 MOUNTING HARDWARE (BY OTHERS) (SUPPLIED WITH 6521 FREEZE VALVE) 12.7mm 1 2" MOUNTING PLATE (MODEL 6700, OPTIONAL) SEE DETAIL A DETAIL A APPROVED: DRAWN: PART NUMBER SCALE: SHEET OF REVISION DRAWING TYPE: SIZE: A BY: ECN NO. PAGE DATE: DATE: ECN: REVISED PER CHK'D.: Haws Corporation - All Rights Reserved. HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation. C R MODEL(S) 1455 KLEPPE LANE SPARKS, NEVADA 89431 (775) 359-4712 FAX (775) 359-7424 E-MAIL: [email protected] WEBSITE: WWW.HAWSCO.COM THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE. F.V. 06-01-98 14 0002076626.D 1109FR 1:16 1 1 IR 04/16/19 . DP 4 OF 4 INSTALLATION 5387 2019 FV 51mm 2" 76mm 3" BACK VIEW NOTES: 6521FR VALVE SYSTEM AIR LINE 64mm 2-1/2"