IFM Electronic Efector200 OGS50 Series Operating Instructions
Text of the manual
1 Functions and features
The through-beam sensor detects objects and materials without contact and
indicates their presence by a switching signal.
For the range see the type label.
2 Installation
transmitter
receiver
Install the receiver (OGE...) and secure it to a bracket.
►
►
Align the transmitter (OGS...) to the receiver and fix it.
►
►
3 Electrical connection
Disconnect power.
►
►
Connect the unit as follows.
►
►
Transmitter
Cable
Connector
Pin connection
L+
BN
pin 1
L-
BU
pin 3
—
—
pin 4
—
—
pin 2
Core colours
BN = brown, BU = blue, BK = black
Receiver
Cable
Connector
Pin connection
L+
BN
pin 1
L-
BU
pin 3
load
BK
pin 4
—
—
pin 2
Core colours
BN = brown, BU = blue, BK = black
4 Operating and display elements
transmitter
receiver
2
2
3
4
LED
1:
[OUT off]
2:
[OUT on]
3:
4 Settings
4.1 The receiver is to switch when the object is detected
1
Position the object.
►
►
receiver
transmitter
Press [OUT on] for 2 s.
►
►
The sensitivity is set to the object.
>>
The LED flashes.
>>
2
Remove the object.
►
►
receiver
transmitter
Press [OUT off].
►
►
The sensitivity is set without object.
>>
The LED goes out. The programming is finished.
>>
4.2 The receiver is not to switch when the object is detected
Position the object (see figure 1) and press [OUT off] for 2
►
►
s.
Remove the object (see figure 2) and press [OUT on].
►
►
