DSE DSE9473 Installation Instructions

the base to a vertical surface with the terminal strips at the bottom. NOTE: This document is intended as a ‘quick start’ guide only. For full operating instructions and specifications, refer to DSE publication: 057-085 DSE9xxx Operator Manual. D E E P S E A E L E C T R O N I C S DSE9473 & DSE9483 Installation Instructions DANGER OF DEATH: LIVE PARTS exist within the DSE9473 & DSE9483 enclosures. The enclosure cover must not be removed. INSTALLATION The DSE9473 & DSE9483 battery chargers are designed to be mounted within a control panel, utilising the integral mounting holes. The DSE9473 & DSE9483 battery chargers are fit-and-forget. It may be permanently connected to the supply and the load, with no requirement to disable the charger during times of heavy load (such as engine cranking) or when in parallel with a charging alternator. BATTERY SUITABILITY The chargers are factory set by DSE to suit Lead Acid batteries and may be ordered to suit other battery types. Additionally, configuration is possible using the DSE Configuraiton Suite PC Software to suit other battery types. Care must be taken to ensure the batteries connected to the charg correct ‘technology’ to suit the setting of the charger. INDICATIONS The DSE9473 & DSE9483 Battery Chargers feature LED indicato battery charger status. DIMENSIONS AND MOUNTING Case Dimensions 205 mm x 135 mm x 80 mm (8.0 ” x 5.3 ” x 3.1 ”) Mounting Holes Dimensions Suitable for M4 (0.2 ” diameter) Mounting Hole Spacings 190 mm x 120 mm (7.5 ” x 4.7 ”) designed to be mounted with the base to a vertical surface with the terminal strips at the bottom. : This document is intended as a ‘quick start’ guide only. For full operating instructions and specifications, refer to DSE publication: Installation Instructions 053-185 ISSUE 1 473 & DSE9483 designed to be mounted within a mounting holes. The DSE9473 & DSE9483 be permanently connected to the supply and the load, with no requirement to disable the charger during times of heavy load (such as engine cranking) or when in parallel with a charging alternator. to suit Lead Acid batteries and may be ordered to suit other battery types. Additionally, configuration is possible using the to suit other battery types. be taken to ensure the batteries connected to the charger are of the feature LED indicators to show the all-guides com

Connection Type Screw terminal, rising clamp, no internal spring Min Cable Size (AC Supply) 2.0 mm² (AWG 15) Min Cable Size (Charge Output) 1.0 mm² (AWG 18) Min Cable Size (All Other Connections) 0.5 mm² (AWG 20) Max Cable Size (AC Supply) 3.3 mm² (AWG 12) Max Cable Size (All Other Connections) 2.5 mm² (AWG 14) Recommended AC Fuse 230 V AC Input 110 V AC Input DSE9473 3.5 A anti-surge 6.3 A anti-surge Recommended AC Fuse 230 V AC Input 110 V AC Input DSE9483 2.0 A anti-surge 3.5 A anti-surge Deep Sea Electronics Plc. Tel: +44 (0)1723 890099 Fax: +44 (0)1723 893303 Email: [email protected] Web: www.deepseaplc.com Deep Sea Electronics Inc. Phone: +1 (815) 316-8706 Fax: +1 (815) 316- 8708 Email: [email protected] Web: www.deepseausa.com