Digisol DG-BR5411QAC Quick Installation Manual

Gigabit Broadband Router DG-BR5411QAC AC 867 Mbps 300 Mbps N

this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Any software described in this manual is sold or licensed "as is". Should the programs prove defective following their purchase, the buyer (and not this company, its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair and any incidental or consequential damages resulting from any defect in the software. Further, this company reserves the right to revise this publication and to make changes from time to time in the contents thereof without obligation to notify any person of such revision or changes. TM DIGISOL is a trademark of DIGISOL Systems Ltd. All other trademarks are the property of the respective manufacturers. 02

in the package, and contact your dealer of purchase to claim for missing items: Product Overview: • DG-BR5411QAC AC1200 Dual Band Wireless Gigabit Broadband Router • Power adapter (12V DC, 1A ) • Quick Installation Guide • Installation Guide CD (includes User Manual & QIG) • Patch Cord (1 No.) Thank you for purchasing DG-BR5411QAC Dual Band Wireless Gigabit Broadband Router which supports Wireless speed Upto 867Mbps on 802.11ac and Upto 300Mbps on 802.11n! DG-BR5411QAC is the best choice for Small office / Home office users, all computers and network devices can share a single cable internet connection at high speed. Easy install procedures allow computer users to setup a network environment in very short time - within minutes, even inexperienced users. When the number of your computers and network-enabled devices grow, you can also expand the number of network slots by simply connecting a hub or switch, to extend the scope of your network. All computers and IEEE 802.11b/g/n/ac wireless-enabled network devices (including PDA, cellular phone, game console and more) can connect to this wireless router without additional cabling. With a compatible wireless card installed in your PC, you can transfer files up to 867Mbps (transfer data rate). Product Features: • High Internet Access throughput • Support dual band (i.e 2.4GHz & 5 GHz) which enhance wireless speed. • Wireless speed up to 867Mbps on 5 GHz and 300Mbps on 2.4GHz • Allows multiple users to share a single Internet line. • Shares a single Cable internet connection. • Access private LAN servers from the internet. • Four wired LAN ports (10/100/1000M) and one WAN port (10/100/1000M). • Works with IEEE 802.11b/g/n/ac wireless LAN devices. 03

• Advanced network and security features like:IP Filter/Traffic Rules, Port Forward, MAC filter, Firewall etc. • Allows you to monitor the router’s status like: DHCP Client Log, System Log, Security Log and Device/Connection Status. • Easy to use Web-based GUI for network configuration and management purposes. • Remote management function allows configuration and upgrades from a remote computer (over the Internet). • Provides Auto MDI / MDI-X function for all wired Ethernet ports. • Desktop computer, Mobile Tab, Smart phone with network adapter (wired/wireless) • Internet connection provided by cable modem with a RJ-45 Ethernet port. • Windows 10/8/7/98/ME/2000/XP/Vista • Web browser (Microsoft Internet Explorer 4.0 or above, Netscape Navigator 4.7 or above, Opera web browser, or Safari web browser). An available AC power socket (100 – 240V, 50/60Hz) 04

Interfaces Description Power Power Socket is where you will connect the power adapter. Please use the power adapter provided with this Wireless Router. LAN (1 - 4) RJ-45 interface to connect to the Ethernet Interface of the computer or other Ethernet devices through a LAN cable. WAN Wide Area Network (WAN / Internet) port. 05

LED LED Status There are four 5dBi dipole, non detachable antennas on each corner of router. WPS, RST button and LED to describe connection status of router. WPS: Press this button for 3 seconds to initiate WPS. RST(RESET): Reset the router to factory default settings (clear all settings). Press this button and hold for 10 seconds to restore all settings to factory default. Indication Router is switched off On Off WAN WAN port is active WAN connected (transferring or receiving data) On Blinking WAN disconnected Off LAN (1-4) LAN port is active LAN connected (transferring or receiving data) On Blinking LAN disconnected Off WLAN (2.4G & 5G) Wireless network is switched on Wireless network is switched off On Off Wireless connected (Transferring or Receiving data) Blinking WPS WPS is active WPS is not active On Off Searching for WPS active device Blinking Top View: LED Description is given below: 06

Please follow the below mentioned instructions to build the network connection between your new wireless router and your computers, network devices: Connect all your computers, network devices (switch/hub) to the LAN port of the router. Connect the power adapter (12V DC / 1A ) to the wall socket, and then connect it to the‘Power’ socket of the router. Please check all LEDs on the front panel. Power LED should be steadily ON, WAN and LAN LEDs should be ON. Check if the computer/network device connected to the respective port of the router is powered ON and correctly connected. If power LED is not ON, or any LED you expected is not ON, please recheck the cabling. Note: CD provided with package contain user manual which helps you to get information in detail. 07

For quick router setup please follow the step mention below: Open the web browser, and type the IP address of the router in the address bar as ‘http://192.168.2.1’. The following web page will display on screen: Enter Username = ‘admin’ and Password = ‘1234’. Click on ‘Sign in’ button to see the web management page of this router. After Login the following page will be displayed: Click on ‘Next’ to select the Mode of Operation. 08

In this mode, the device is supposed to connect to the internet via ADSL/Cable Modem. The NAT is enabled and PCs in LAN ports share the same IP to ISP through WAN port. The connection type can be setup in WAN page by using PPPoE, DHCP client, PPTP client, L2TP client or static IP. There are three modes of operation 1. Gateway Mode 2. Bridge Mode 3. Wireless ISP Mode 1. Gateway Mode : 09

In this mode all ethernet interfaces and wireless interface are bridged together and NAT function is disabled. All the WAN related functions and firewall are not supported. 2. Bridge Mode : 10

In this mode, all ethernet ports are bridged together and the wireless client will connect to ISP access point. The NAT is enabled and PCs in ethernet ports share the same IP to ISP through wireless LAN. You can connect to the ISP AP in Site-Survey page. The connection type can be setup in the WAN page by using PPPoE , DHCP client, PPTP client , L2TP client or static IP. 3. Wireless ISP Mode : 11

Step 1: Time Zone Setting. Select your Time Zone according to your location. Step 2: LAN Interface Setup This page is used to configure the parameters for local area network which connects to the LAN port of your Access Point. Here you may change the setting for IP address, subnet mask, DHCP etc. Enter the IP address and Subnet mask. 12

This page is used to configure the parameters for Internet Network which connects to the WAN port of your Access point. Here you may change the access method to Static IP, DHCP, PPPoE, PPTP or L2TP by clicking the drop-down menu of WAN Access type. If you’re not sure, please contact your Internet Service Provider. A wrong Internet connection type will cause connection problem, and you will not be able to connect to the internet. Static IP Configuration: Select Access type as ‘’Static IP’’ if IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address and DNS address provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). IP address Please input IP address assigned by your service provider. Parameter Description Subnet Mask Please input subnet mask assigned by your service provider Default Gateway Please input the default gateway assigned by your service provider. 13

Address information automatically from your ISP. Usually Cable Modem and the router will automatically obtain an IP address from the DHCP server. Select WAN Access type as ‘PPPoE’. If your ISP uses a PPPoE connection it will provide you with a username and password. Enter the username and password in the respective field as shown below. PPPoE configuration 14

Step 5: Wireless 5Ghz Basic Settings. This page is used to configure the parameters for Wireless LAN clients which may connect to your Access Point. 15

This page allows you to setup the wireless security. Turning on WEP or WPA by using Encryption Keys could prevent any unauthorized access to your wireless network. Step 7: Wireless 2.4GHz Basic Settings. This page is used to configure the parameters for Wireless LAN clients which may connect to your Access Point. 16