CAB CU Series Operator's Manual
File Specifications
| Brand: | CAB |
| Category: | Cutter |
| Model: | CU Series (Operator's Manual), prpo.RwHnnUq2 |
| File Info: | Adobe Acrobat PDF (DjVu) |
| File Size: | — |
| Pages: | 26 pages |
Download PDF
Download CAB CU Series Manual (26 pages)Read Online:
Read the CAB CU Series Operator's Manual online using the built-in PDF viewer. This document explains how to operate the device, adjust settings and perform regular maintenance.
Key Pages of Document
5.2 Operation Without Cover Plates
Due to the most varied materials it can come in rare cases to transportation problems of the material depend of the cover plates. It's possible to clear this problem with dismounting the cover plates. ! Warning! Risk of injury! If the cover plates for a better performance should be removed, appropriate compensating measures are to be arranged for the guarantee of security! i Notice! In case the material do adhere in follow of electrostatic charge it's possible to use a discharge brush for the printer by cab. 2 2 1 3 4 4 ! Warning! Risk of i ...
Table of Contents
1 Introduction ....................................................................................4 1.1 Instructions ......................................................................................4 1.2 Intended Use ...................................................................................5 1.3 Safety Instructions ...........................................................................6 1.4 Environment .....................................................................................6 1.5 Technical Data ................................................. ...
Ground ( 0 V )
13 STA Start signal is active The signal enables the "Cut on demand" operating mode. In this case the XSTART signal is checked. With signal STA disabled the cutter is oper- ated in the standard mode. Connect Pin 13 with Pin 12 (GND) 14 RUEL Reverse line foe all output signals 15 24P Operating voltage +24 V, 100 mA CAUTION ! Output !!! DO NOT connect any external voltage at Pin 15 ! 7.3 Circuit Diagram of Inputs The XSTART and XFEH inputs are optocouplers with a current limiting resistor of 2.2kΩ giving a voltage of ...
CAB CU Series user guide recommended for: RC2512 Series, 44, MJ-HVR12E-RM, SQUIX CSQ 400, CU200.
⚠️ Download Safety
The Cutter Operator's manual (26 pages) is completely safe to download (last scan date: 20/10/2025).
Related PDF Instructions for CAB CU Series:
-
CAB A+ Label Maker Programming manual
A+484 -
CAB THARO Apollo Series Printer Operator's manual
THARO Apollo Series139 -
CAB CU200 Cutter Operator's manual
CU20021 -
CAB EOS4 P Dispenser Operator's manual
EOS4 P12 -
CAB E4/200 Label Maker Quick start instruction manual
E4/2006 -
CAB A4+M Label Maker Operator's manual
A4+M28
Cutter Equipment: Frequently Requested
-
Makita DLW140 Cut-off machines
23.12.2025Full technical guide for the Makita DLW140 Cut-off machines. This guide provides information on configuration options, safety guidelines, power management.DLW140, 36 -
Vitrex Astro 720W Cutter
14.12.2025Advanced user manual for the Vitrex Astro 720W Cutter. This manual elaborates on safety precautions, product handling, operating modes.Astro 720W, 6 -
GCE proFIT SLM Cutter
21.02.2026Technical guide for the GCE proFIT SLM Cutter. This manual provides information on network setup, device safety checks, component overview.proFIT SLM, 136 -
Hitachi CM5SB Cutter
09.11.2025Operation instructions for the Hitachi CM5SB Cutter. It details troubleshooting tips and safety protocols, software updates, software installation, maintenance procedures.CM5SB, 36 -
Makita 4101RH Cutter
21.02.2026Complete operating guide for the Makita 4101RH Cutter. It offers guidance on network setup, power management, system configuration, usage examples.4101RH, 44 -
Stanley IBC600 Power Tool
25.03.2026Comprehensive user handbook for the Stanley IBC600 Power Tool. The document includes maintenance procedures, hardware instructions, operating conditions, technical assistance.IBC600, 24
Have some Questions about CAB CU Series Device?
Get valuable and actionable advices from other CAB CU Series device users. Describe your problem or question, regarding the using of CAB CU Series, in as much detail as possible, and other users will be able to answer you.