Denon MC2000 Quick Start Manual

The Denon DJ MC2000 is a class compliant USB plug and play device for Mac, however requires drivers for Windows. You will find these on the installation cd provided within your Denon DJ MC2000. NOTE: Please ensure you have the latest available drivers AND firmware updates, which may be required in order to be compatible with Serato DJ. Please go to http://serato.com/dj/support 1. Download and install the latest version of Serato DJ from http://serato.com/dj/ downloads 2. Connect your Denon MC2000 to an available USB Port. Open Serato DJ. Serato DJ Activation To find out how to activate Serato DJ by either starting your free 14 day trial, or purchasing a license for Serato DJ, click here for the most up to date information. Insert RCA and connect to Speaker/Stereo setup Monitor level for the AUX IN Channel Adjust the volume of any auxilary source here Connect any Auxilary source with RCA here Adjust the level of microphone here Insert microphone jack here Insert USB from computer here

manual or auto loops. You can choose whether you have 4 loops (and 4 cuepoints) showing on screen, or 8 loops. To switch between Manual and Auto looping, click (Manual) or (Auto) onscreen. MC2000 Control Manual Looping IN Set loop in point (Loop not active) IN Edit start of loop point (Loop active) OUT Set end of loop point (If Loop in point set) OUT Edit end of loop point (Loop active) AUTO/EXIT Exit Manual Loop NOTE: The best way to edit the start and end points of a manual loop is with the jog wheel/platter on your Denon DJ MC2000. MC2000 Control Auto Looping AUTO/EXIT Start Auto Loop - Halve Auto Loop length + Double Auto Loop length NOTE You can also save a loop to the next available free loop slot in the software. To do this, either click the button in the manual/auto loop tab or click on an available loop slot. Your loops are saved to the file and recalled the next time it is loaded. They are not lost if the file is moved or renamed.

to open the FX panel. Select either 1, 2 or M to assign the selected effect bank to a deck or Master Output. To activate an effect, click the ON button on your FX UNIT in the software, or the left most button in either FX1 or FX2 areas of your controller. You can adjust effect parameters by using either software controls, or the knobs/ buttons in the FX1 and FX2 section on your controller. There are two available modes in the DJ-FX. Single FX Mode allows you to select one effect per FX bank, and has multiple parameters that can be adjusted. Multi FX Mode allows you to select up to three effects per FX bank, and adjust only one parameter, the FX Depth. The same effects available in Single FX mode are available in Multi FX mode, as well some additional presets. You can select between the two FX modes by clicking either the Single FX mode button or Multi FX mode button MC 2000 Control Single FX Mode Shift FX Knob 1 Adjust Parameter 1 FX Knob 2 Adjust Parameter 3 FX Knob 3 Adjust Parameter 5 FX button 1 Effect On/Off Select Effect FX Button 2 Adjust Parameter 2 FX Button 3 Adjust Parameter 4 MC 2000 Control Multi FX Mode Shift FX Knob 1 Adjust Slot 1 Parameter FX Knob 2 Adjust Slot 2 Parameter FX Knob 3 Adjust Slot 3 Parameter FX Button 1 Slot 1 On/Off Select Effect in Slot 1 FX Button 2 Slot 2 On/Off Select Effect in Slot 2 FX Button 3 Slot 3 On/Off Select Effect in Slot 3 The effect time is set using the tracks BPM value, but by applying the Beats Multiplier you can increase or decrease the effect timing. Modify this by using the BEATS knob on the controller. Automatic tempo requires that the track on the deck assigned to the FX Unit has BPM information. Manual tempo mode allows you to tap in the tempo yourself. Note: To change to Manual Tempo mode, simply tap the BEATS knob until a desired rate is established. To return to AUTO mode, click and hold the BEATS for 1 second. MC2000 Control Serato DJ Function BEATS press for 1 second Auto Tempo Mode Tap down the BEATS to the desired rate Tap Turn BEATS knob Beats Dial

playback and mix video files, use effects and fader transitions with your Serato DJ Controller, an additional MIDI controller or your mouse/keyboard. For more information on Serato Video click here. MIDI The MIDI control feature in Serato DJ provides the ability to map Serato DJ software functions to MIDI controller functions such as keyboards, triggers, sliders, and knobs. Integrating MIDI controllers into your Serato DJ setup can improve live performance usability, such as hitting pads on a MIDI controller to trigger Loops and Cue Points. For more information download the Serato DJ manual here. NOTE: You can not MIDI Map your Denon MC2000, you will need to connect an additional MIDI controller to use these MIDI functions.

# MC 2000 Control Serato DJ Function Shift Function 1 FX1/2 Knobs 1,2,3. Adjusts parameters for Slots 1,2 and 3 2 BEATS (SAMPLE VOL) Adjust Beats Multiplier Adjust SP-6 Master Volume/SP-6 Mute Volume (Click) 3 FX 1/2 Buttons 1,2,3 Button 1 (Slot 1 On/Off ) Button 2 (Slot 2 On/Off ) Button 3 (Slot 3 On/Off ) Button 1 (Select Effect in Slot 1), Button 2 (Select Effect in Slot 2), Button 3 (Select Effect in Slot 1) 4 -, AUTO/EXIT, + Adjust the size of your Auto loop when combined with - or +/ Auto Loop On/Off 5 LOOP IN/OUT Set Manual Loop IN/OUT also can be edited holding In/Out and use the Jog wheel to edit loop 6 MONITOR PAN Headphone Cue/Master Split 7 HOT CUE/ SAMPLE 1,2,3,4 Set/Trigger Cue (1,2,3,4) /Sample trigger (1,2,3,4) Delete Cue 1,2,3,4/ Shift + Sample + 1,2,3,4 stops sample playback, if the SP-6 mode supports this 8 PHONES Knob Adjust Headphone Output 9 SAMPLE MODE Activates SP-6 Sample Player Control 10 KEY LOCK/PITCH RANGE Keylock On/Off Adjust Tempo Range 11 JOG WHEEL Adjust/Scratch or Jog Beat Skip 12 PITCH FADER Adjust Tempo When in Sync mode, used to disable the Pitch Fader temporarily and change the zero position. 13 SYNC Sync On Sync Off (Press twice to return to Absolute Pitch when in Relative Mode) 14 CUE Temp cue Jump to start of track (more than 2 Sec elapsed) Previous track (less than 2 sec elapsed) 15 PLAY/PAUSE Play/Pause Stutter Play 16 VINYL MODE Toggles between Vinyl mode and Jog mode

Pitch Bend Up/Pitch Bend down Fast Forward/Rewind 18 CHANNEL FADER Adjusts Channel Volume 19 CROSSFADER Mix between Left and Right Channels 20 LEVEL Adjusts Channel 1 & 2 Gains 21 LOAD A/B Load tracks to Deck 1(A) or Deck 2(B) 22 HI/MID/LOW EQ adjustment for High/Mid/Low frequencies 23 SEL Library Scroll Toggle between Library and crates 24 BACK/FWD Toggles between library and crates 25 BROWSE 1 Panel Select 26 BROWSE 2 Area Cycle 27 SHIFT/DELETE Added Shift functionality is applied when used in conjunction with other controls 28 MONITOR CUE Cue selected channel in headphones 29 MASTER LEVEL Adjust Master Output # MC 2000 Control Serato DJ Function Shift Function

Click on the icon to enable Tool Tips. This is located in between the MIDI and setup button in the top right hand corner of the screen. Tool Tips provide a handy way to learn the various features of Serato DJ. Move the mouse over a section of the screen to bring up a context sensitive tool tip. Holding the mouse over the button with Tool Tips turned on will show you a list of all keyboard shortcuts. For more information about how to use Serato DJ, please go to our website www.serato.com or refer to the Serato DJ Software Manual. For more information on your controller, please refer to the hardware manual. For further help, please contact [email protected] or go to www.serato. com/dj/support