ARRI cforce plus Operation & User’s Manual

U S E R M A N U A L 1st August 2016 cforce plus Lens Motor U S E R M A N U A L 1st August 2016

Betriebs KG. All rights reserved. No parts of this document may be reproduced without prior written consent of Arnold & Richter Cine Technik GmbH & Co. Betriebs KG. Specifications are subject to change without notice. Errors, omissions, and modifications excepted. ARRI, ALEXA, AMIRA, LDS and LENS DATA SYSTEM are trademarks or registered trademarks of Arnold & Richter Cine Technik GmbH & Co. Betriebs KG. All other brands or products are trademarks or registered trademarks of their respective holders and should be treated as such. Original version. For further assistance ARRI Cine + Video Geräte Gesellschaft m.b.H. Pottendorferstraße 23-25/3/1 A-1120 Vienna Austria E-mail: [email protected] Website: www.arri.com Scope This User Manual applies to the following product: K2.0008819 cforce plus Lens Motor with Software Update Packet V1.1.1 Revision history Version ID Order # Release Date 01 10001488 K5.0008999 F06024 1.6.2016 02 10001488 K5.0008999 W01137 1.8.2016

and understand all the respective instructions. The ARRI cforce plus Lens Motor is only available to commercial customers. By utilization, the customer agrees that the cforce plus Lens Motor or other components of the system are deployed for commercial use only. Otherwise the customer must contact ARRI before utilization. While ARRI endeavors to enhance the quality, reliability and safety of their products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize the risk of damage to property or injury (including death) to persons arising from defects in the products, customers must incorporate sufficient safety measures in their work with the system and heed the stated canonic use. ARRI or its subsidiaries do not assume any responsibility for losses incurred due to improper handling or configuration of the cforce plus Lens Motor or other system components. ARRI assumes no responsibility for any errors that may appear in this document. The information is subject to change without notice. For product specification changes after this manual was published, refer to the latest published ARRI data sheets or release notes, etc., for the most up-to-date specifications. Not all products and/ or types are available in every country. Please check with an ARRI sales representative for availability and additional information. Neither ARRI nor its subsidiaries assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of ARRI products or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property right of ARRI or others. ARRI or its subsidiaries expressly exclude any liability, warranty, demand or other obligation for any claim, representation, cause, action, or whatsoever, express or implied, whether in contract or not, including negligence, or incorporated in terms and conditions, whether by statue, law or otherwise. In no event shall ARRI or its subsidiaries be liable for or have a remedy for recovery of any special, direct, indirect, incidental, or consequential damages, including, but not limited to lost profits, lost savings, lost revenues

downtime, good-will, damage to or replacement of equipment or property, any cost or recovery of any material or goods associated with the assembly or use of our products, or any other damages or injury of the persons and so on or under any other legal theory. In the event that one or all of the foregoing clauses are not allowed by applicable law, the fullest extent permissible clauses by applicable law are validated.

5 Table of Contents 1 For your safety....................................................................6 2 Audience and intended use...............................................8 3 Scope of delivery and warranty.........................................9 4 Introduction........................................................................10 4.1 LBUS.........................................................................11 5 Motor layout.......................................................................12 5.1 Setup button..............................................................12 5.2 Status LED................................................................13 6 Motor preparation............................................................. 14 7 Compatibility......................................................................16 7.1 Sample configurations.............................................. 16 8 Software update................................................................ 20 9 Appendix............................................................................ 21 9.1 Part numbers............................................................ 21 9.2 Specifications............................................................ 24 9.3 Pinouts...................................................................... 24 9.4 Dimensions and weight.............................................25 9.5 Service contacts........................................................26 9.6 International declarations..........................................27