3DGence DOUBLE P255 Operation & User’s Manual

3DGence DOUBLE P255 | version 09.2018 7. The extruder motor will start after activation of the sensor. Push the filament so that its tip passes through the entire length of the bowden tube (fig. 38, point 3) up to the extruder (fig. 38, point 4). If the material has been inserted correctly, it will be intercepted by the extruder. The material will be drawn by the extruder and resistance will be felt when attempting to withdraw the material. 8. When the nominal material extrusion temperature is reached, the process will start automatically. The extruder will push the material th ...

3DGence DOUBLE P255 | version 09.2018 7. The extruder motor will start after activation of the sensor. Push the filament so that its tip passes through the entire length of the bowden tube (fig. 38, point 3) up to the extruder (fig. 38, point 4). If the material has been inserted correctly, it will be intercepted by the extruder. The material will be drawn by the extruder and resistance will be felt when attempting to withdraw the material. 8. When the nominal material extrusion temperature is reached, the process will start automatically. The extruder will push the material th ...

3DGence DOUBLE P255 | version 09.2018 Printer info - displays the information on the printer (fig. 30). Fig. 30 PRINTER INFO menu screen Machine type: printer model. Serial number: printer serial number. Firmware: firmware version. Build date: firmware release date. Total printed material: total length of printed filament. Total printed time: total printing time. 3.2. Menu during operation The menu of 3DGence DOUBLE P255 printer changes during printing process. Some menu options available in the idle state are not available during printing. The menu structure in the working mod ...

3DGence DOUBLE P255 | version 09.2018 VIII SERVICE ACTIVITIES 1. INDICATIONS FOR HEATBED CALIBRATION The calibration process of the heatbed (heatbed scan) is not required every time the printer is started - it is enough to carry it out every few dozen to several hundred hours of printing. The heatbed calibration process is described in chapter III, point 3.1. Calibrate the heatbed if any of the below symptoms occur: • the printer is to be started for the first time, • one or more corners or edges of the printout get unstuck or do not adhere to the heatbed, • one or more c ...

3DGence DOUBLE P255 | version 09.2018 VI DUAL HOTEND MODULE The dual hotend module is a permanent element of 3DGence DOUBLE P255 printer. T0 hotend, which is responsible for plasticizing the base material, is located on the left side of the user facing the printer (in fig. 47, the hotend is in the inactive position, marked in red). On the right side, there is T1 hotend responsible for plasticizing the support material (in fig. 47, the hotend is in the active position, marked in blue). Other key elements of the dual hotend module are shown below (fig. 48, 49). To get access to t ...

3DGence DOUBLE P255 | version 09.2018 3.2. The printer's backlight indications 3DGence DOUBLE P255 printer is equipped with LED backlight located under the printer's upper plate. The LED backlight illuminates the printout during the printer operation and is also a form of signalling device. The description of all backlight colours and their meanings is given below (table 1). Tab. 1 Meaning of backlight colours in 3DGence DOUBLE P255 printer COLOUR MEANING Green Safe temperature of the heatbed (below 40°C). After completed printing, the printout can be safely unloaded. Red Heatb ...