Beyerdynamic Opus 910 Operating Instructions Manual

dealer. Unauthorised attempts at repair may invalidate the warranty. 7. Licensing In most countries around the world, wireless systems must be approved for use by the authorities and it may be necessary to obtain a licence to use it legally. Your local beyerdynamic dealer will be able to give you details on wireless system regulations for your area. The components of the Opus 910 system are approved according to the directive 99/5/EEC: TS 910 M, TS 910 C S 910 M, S 910 C under the ...

The AF or RF level is shown in the LC-display. 1.4.3 Group, Channel • Turn the menu control to select “G/CH”. The currently selected group and channel are displayed. • To change the setting, press the menu control. The group number will start flashing. Turn the menu control to select the desired group. In order to confirm the selected group press the menu control. • At the same time the channel number will start flashing. Turn the menu control to select the desired channel. In order to confirm the selected channel press the menu control. ...

Connect the antennae to the TNC sockets and ( . Set them at an angle (60°). Please note that for diversity operation both antennae have to be connected. A weighting circuit silently switches the signal with the better S/N ratio to the output. 1.4 LC-Display and Menu Settings On the LC-Display all operating parameters such as RF and AF level will be shown. Using the “Menu“ control you can select from 6 options. The selected function is surrounded by a square frame and shown at the bottom of the LC-Display. By selecting the ESC button you ...